1. Увод
This manual provides instructions for the safe and efficient operation of your Lepro PR210002-US LED Table Lamp. Овај свестрани лamp offers a range of lighting options, including tunable white light, RGB color changing, dimming capabilities, and an auto-off timer. Please read this manual thoroughly before use and retain it for future reference.
Figure 1: Lepro PR210002-US LED Table Lamp.
2. Садржај пакета
Before proceeding with setup, please ensure all components are present:
- 1 x Lepro PR210002-US LED Table Lamp
- 1 к амерички адаптер за напајање
- 1 к УСБ кабл типа Ц
- 1 x Упутство за употребу (овај документ)
3. Подешавање
Follow these steps to set up your LED Table Lamp:
- Raspakujte: Пажљиво уклоните све компоненте из паковања.
- Прикључите напајање: Insert the Type C USB cable into the lamp's charging port. Connect the other end of the USB cable to the provided US power adapter, then plug the adapter into a standard wall outlet.
Figure 2: Connecting the lamp to power. The lamp measures 3.9 inches in diameter and 7.1 inches in height, with a 4.9 ft cable.
4. Упутство за употребу
The Lepro LED Table Lamp features intuitive touch controls located on the top surface and the base.
Figure 3: Touch Control Overview.
4.1. Укључивање/искључивање
- Кратки притисак: Lightly tap the top touch area (power symbol) to turn the lamp укључено или искључено.
4.2. Adjusting White Light (Tunable White Mode)
Тхе лamp offers three white light temperatures: 2700K (Warm White), 4000K (Neutral White), and 5700K (Cool White).
- Промена температуре: Press the 'M' button on the lamp's base to cycle through the white light temperatures (2700K → 4000K → 5700K).
- Подесите осветљеност: While in any white light mode, Дуги притисак the top touch area to continuously adjust the brightness from 5% to 100%. Release when desired brightness is reached.
Figure 4: Tunable White Light Options (2700K, 4000K, 5700K).
4.3. RGB Color Changing Modes
Тхе лamp features 7 static RGB colors and an auto-color changing mode.
- Access RGB Modes: Press the 'M' button repeatedly until the lamp enters RGB mode.
- Select Static Color: While in RGB mode, Дуги притисак the top touch area to cycle through the 7 available colors. Release when your desired color is displayed.
- Auto Color Changing: Continue pressing the 'M' button after the static RGB colors to activate the auto-color changing mode.
- Adjust Speed (Auto Mode): While in auto-color changing mode, Дуги притисак the top touch area to adjust the speed of the color transitions (3-level speed).
Figure 5: RGB Color Changing Mood Light.
4.4. Auto-Off Timer
Тхе лamp includes a convenient auto-off timer function for 30 or 60 minutes.
- Активирај тајмер: Press the timer button (clock symbol) on the lamp'с басе.
- 30-минутни тајмер: One press activates the 30-minute timer (indicated by one green LED on the base).
- 60-минутни тајмер: A second press activates the 60-minute timer (indicated by two green LEDs on the base).
- Deactivate Timer: A third press will turn off the timer function (no green LEDs).
Figure 6: Auto-Off Timer Function.
4.5. Функција меморије
Тхе лamp retains the last used brightness and color setting when turned off and on again, ensuring a consistent experience.
5. Одржавање
Да бисте осигурали дуговечност и оптималне перформансе вашег лamp, пратите ова упутства за одржавање:
- Чишћење: Искључите лamp искључите струју пре чишћења. Користите меку, суву крпу да обришетеamp's surface. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Руковање: Руковати лamp with care. Avoid dropping it or subjecting it to strong impacts.
- Складиштење: Ако чувате лamp for an extended period, ensure it is clean and dry. Store it in a cool, dry place away from direct sunlight.
КСНУМКС. Решавање проблема
If you encounter issues with your Lepro LED Table Lamp, погледајте следеће уобичајене проблеме и решења:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Lamp се не укључује. | Нема прикључка за напајање. | Ensure the power adapter is securely plugged into a working outlet and the USB-C cable is firmly connected to the lamp. |
| Brightness adjustment is not smooth or lamp turns off when dimming. | Incorrect operation of touch control. | Ensure you are performing a Дуги притисак on the top touch area to adjust brightness. A short press will turn the lamp off. Release your finger when the desired brightness is achieved. |
| Colors are not changing or cycling. | Not in RGB mode or incorrect operation. | Press the 'M' button to cycle through modes until RGB mode is active. For static colors, Дуги притисак the top touch area. For auto-changing, ensure auto-color changing mode is selected via the 'M' button, then Дуги притисак the top touch area to adjust speed. |
| Функција тајмера не ради. | Timer not activated or incorrectly set. | Press the timer button on the base. One green LED indicates 30-minute timer, two green LEDs indicate 60-minute timer. Ensure the correct timer setting is active. |
7. Спецификације
| Феатуре | Детаљ |
|---|---|
| Број модела | ПР210002-УС |
| Бранд | Лепро |
| Димензије производа | 3.9"Д к 3.9"Ш к 7.1"В |
| Тежина артикла | 0.85 фунте (13.6 унци) |
| Материјал | Пластика |
| Тип извора светлости | ЛЕД |
| Осветљеност | 350 лумена |
| Ватtage | 7 вати |
| Волtage | 120 волти (АЦ) |
| Опције светлих боја | 7 Colors + 3 White Light Temperatures (2700K-4000K-5700K) |
| Контролни метод | Додирните |
| Извор напајања | Цордед Елецтриц |
| Цабле Ленгтх | 4 стопа |
| Унутрашња/спољна употреба | Само за унутрашњу употребу |
| Ниво отпорности на воду | Није водоотпоран |
8. Гаранција и подршка
For warranty information or technical support, please contact Lepro customer service through their official website or the retailer where the product was purchased. Please have your model number (PR210002-US) and purchase details ready when contacting support.