POOLEX Poolstar Nano Action 3 kW Heat Pump User Manual

1. Увод

This manual provides essential information for the safe and efficient operation of your POOLEX Poolstar Nano Action 3 kW heat pump. Please read this manual thoroughly before installation and use, and keep it for future reference. This heat pump is designed for heating small outdoor pools with a volume ranging from 10 to 21 m³.

Figure 1.1: POOLEX Poolstar Nano Action 3 kW Heat Pump. This image shows the compact design of the heat pump with its front fan and side connections.

2. Безбедносне информације

Увек се придржавајте следећих мера предострожности како бисте спречили повреде или оштећење уређаја:

• Ensure the power supply matches the specifications of the heat pump.
• Немојте користити јединицу ако су кабл за напајање или утикач оштећени.
• Држите децу и кућне љубимце даље од уређаја током рада.
• Не блокирајте отворе за усис или издув ваздуха.
• Искључите напајање пре него што извршите било какво одржавање или чишћење.
• Installation must comply with local electrical and plumbing codes.
• The unit is equipped with a 10 mA differential protection for safety. Do not bypass this feature.

3. Садржај пакета

Проверите да ли су све ставке присутне у пакету:

• POOLEX Poolstar Nano Action 3 kW Heat Pump Unit
• Power cable with 10 mA differential protection
• PVC connectors (diameter 32 mm)
• Црево клamps
• Multilingual instruction manual

Figure 3.1: Product Packaging. The image displays the retail box of the POOLEX Nano Action heat pump, highlighting its features and included accessories.

Figure 3.2: Power Cable. This image shows the power cable equipped with a safety differential protection device.

Figure 3.3: Included Accessories. This image displays the PVC connectors and hose clamps provided for installation.

4. Подешавање и инсталација

The POOLEX Poolstar Nano Action heat pump is designed for easy "Plug & Play" installation. No bypass is required.

1. Пласман: Position the heat pump on a stable, level surface near your pool. Ensure adequate air circulation around the unit. Avoid placing it in enclosed spaces.
2. Везе:
   • Connect the pool's filtration system outlet to the "IN" port of the heat pump using the provided PVC connectors and hoses (not included).
   • Connect the "OUT" port of the heat pump back to the pool's return inlet.
   • Secure all connections with the provided hose clampс за спречавање цурења.
3. Прикључак за напајање: Plug the heat pump's power cable into a suitable electrical outlet. The 5-meter cable includes a 10 mA differential protection for safety.
4. Иницијална провера: Before starting, ensure all connections are tight and there are no visible leaks.

Figure 4.1: Typical Installation. This image illustrates the heat pump connected to an above-ground pool's filtration system in a garden setting.

Figure 4.2: Plug & Play Setup. This image demonstrates the simple electrical connection of the heat pump to a power outlet, highlighting its ease of use.

5. Упутство за употребу

The Poolstar Nano Action heat pump is designed for straightforward operation.

1. Покретање: Once connected, ensure your pool's filtration system is running. The heat pump requires water flow to operate.
2. Подешавање температуре: Use the control panel on the unit to set your desired water temperature. Refer to the specific instructions on the unit's display for navigation.
3. Процес грејања: The heat pump will begin to heat the water as it circulates through the unit. Heating time will vary depending on pool volume, initial water temperature, and ambient air temperature. The unit is capable of operating in temperatures as low as 8°C.
4. Аутоматски рад: The heat pump will automatically turn on and off to maintain the set temperature, provided the filtration system is running.

Figure 5.1: Extending the Season. This image suggests the heat pump's ability to extend the swimming season into cooler weather, even with snow in the background.

6. Одржавање

Редовно одржавање осигурава оптималне перформансе и дуготрајност ваше топлотне пумпе.

• Чишћење: Периодично чистите спољашњост уређаја меком,amp тканина. Немојте користити абразивна средства за чишћење или раствараче.
• Вентилациони отвори: Ensure the air intake and exhaust vents are free from debris, leaves, or other obstructions. Blocked vents can reduce efficiency and damage the unit.
• Прикључци за воду: Regularly check hose connections for leaks and tighten clampс ако је потребно.
• Зимљење: Before freezing temperatures, drain all water from the heat pump and disconnect it from the pool system. Store the unit in a dry, protected area.

КСНУМКС. Решавање проблема

Погледајте табелу испод за уобичајене проблеме и њихова решења. Ако проблем и даље постоји, контактирајте корисничку подршку.

8. Спецификације

Figure 8.1: Ultra Compact Design. This image visually represents the compact size of the heat pump, shown next to a dog for scale, emphasizing its small footprint.

9. Гаранција и подршка

Your POOLEX Poolstar Nano Action heat pump comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.

For technical support, spare parts, or warranty claims, please contact POOLEX customer service. Contact details can typically be found on the manufacturer's official webсајту или на паковању производа.

Произвођач: POLLSTAR

Датум прве доступности: 12. март 2021