CHACON 54018

CHACON 54018 Analogue Timer Sockets Instruction Manual

Set of 3 Analogue Timers, Sockets

1. Увод

This manual provides essential information for the safe and efficient use of your CHACON 54018 Analogue Timer Sockets. Please read these instructions carefully before installation and operation, and retain them for future reference. The CHACON 54018 is designed to automate the switching of electrical appliances on and off at pre-set times.

2. Безбедносне информације

  • електрична безбедност: Always ensure the timer is unplugged before cleaning or making any adjustments. Do not exceed the maximum load rating specified for the timer.
  • Само за унутрашњу употребу: This product is designed for indoor use in dry conditions. Do not expose to water, moisture, or extreme temperatures.
  • деца: Држите уређај ван домашаја деце.
  • Оштећење: Do not use the timer if it appears damaged. Contact customer support for assistance.
  • вентилација: Ensure adequate ventilation around the timer when in use.

3. Садржај пакета

Пакет укључује:

  • 3 x CHACON 54018 Analogue Timer Sockets
  • Упутство за употребу (овај документ)

4. Производ је готовview

Each CHACON 54018 Analogue Timer Socket features a rotating dial for setting time and programming pins for scheduling on/off cycles. It is designed for simple and reliable operation.

Three CHACON 54018 Analogue Timer Sockets, white in color, each with a circular timer dial at the top and a power socket at the bottom.

Слика 1: Готовоview of the three CHACON 54018 Analogue Timer Sockets. Each unit consists of a timer mechanism at the top and a standard electrical socket at the bottom, allowing for automated control of connected devices.

5. Подешавање

  1. Raspakujte: Carefully remove the timer sockets from their packaging.
  2. Почетна наплата (ако је применљиво): Some analogue timers may require a brief period plugged into a live socket to charge an internal battery for timekeeping. Refer to specific markings on the device if present.
  3. Подесите тренутно време: Rotate the outer dial of the timer clockwise until the current time aligns with the arrow or marker on the timer's face. The dial typically represents a 24-hour cycle.

6. Упутство за употребу

6.1 Setting On/Off Times

  1. Идентификујте пинове: The timer dial is surrounded by small, push-down pins. Each pin typically represents a 15 or 30-minute interval.
  2. Program ON Periods: Push down the pins corresponding to the time periods you want the connected appliance to be ON.
  3. Program OFF Periods: Leave the pins in the UP position for the time periods you want the connected appliance to be OFF.
  4. Повежите уређај: Plug the appliance you wish to control into the timer socket.
  5. Plug Timer In: Insert the timer socket into a wall outlet.
  6. Активирај тајмер: Ensure the manual override switch (if present) is set to the 'Timer' or 'Auto' position.

6.2 Ручно пребацивање

Most analogue timers include a manual override switch, often located on the side or front. This switch allows you to bypass the timer settings and keep the appliance permanently ON or OFF, or to activate the timer function. Refer to the markings on your specific unit for switch positions (e.g., 'ON', 'OFF', 'TIMER' or 'AUTO').

7. Одржавање

  • Чишћење: Искључите тајмер из утичнице пре чишћења. Обришите спољашњост меком, сувом крпом. Не користите течна средства за чишћење или абразивне материјале.
  • Складиштење: Store the timers in a cool, dry place when not in use.
  • инспекција: Periodically inspect the timer and its cord for any signs of damage.

КСНУМКС. Решавање проблема

  • Timer not turning ON/OFF:
    • Check if the timer is correctly plugged into a live wall outlet.
    • Ensure the appliance plugged into the timer is working correctly.
    • Verify that the pins are pushed down for the desired ON periods and up for OFF periods.
    • Confirm the manual override switch is set to 'Timer' or 'Auto'.
    • Ensure the current time is correctly set on the dial.
  • Бројчић тајмера се не окреће:
    • Ensure the timer is plugged into a live power source. Analogue timers require power to operate their internal clock mechanism.

9. Спецификације

Феатуре Детаљ
Модел CHACON 54018
Тип Analogue Timer Socket
Количина Сет од 3
Боја Multicoloured (typically white)
Тежина артикла 0.37 Kilograms (for the set)
Батерије су потребне бр
Обавезна монтажа бр
Произвођач ШАКОН

10. Гаранција и подршка

CHACON products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation provided at the point of purchase or visit the official CHACON webсајт. Сачувајте доказ о куповини за потребе гаранције.

© 2025 CHACON. All rights reserved.