1. Увод
The Antari Z-10 is a wired remote control designed to provide convenient and reliable operation for compatible Antari fog and haze machines. This manual provides essential information for the safe and effective use of your Z-10 remote control.
2. Безбедносне информације
- Read all instructions thoroughly before operating the device.
- Do not expose the remote control to moisture, rain, or liquids.
- Use the Z-10 only with the specified Antari fog and haze machines (Z-800II, Z-1000II, Z-1020, B-100X, B-200, HZ-350).
- Држите даљински управљач ван домашаја деце.
- Always disconnect power to the fog/haze machine before connecting or disconnecting the remote control, or performing any maintenance.
- Do not attempt to open or modify the remote control. Refer all servicing to qualified personnel.
3. Садржај пакета
Проверите да ли ваш пакет садржи следећу ставку:
- Antari Z-10 Wired Remote Control
4. Подешавање
- Ensure your Antari fog or haze machine is powered off and unplugged from the main power supply.
- Locate the remote control input port on your compatible Antari machine. This port is typically a multi-pin connector.
- Carefully insert the connector of the Antari Z-10 wired remote control cable into the machine's remote input port. Ensure the connection is firm and secure.
- Once connected, you may plug in and power on your Antari fog or haze machine.
Image of the Antari Z-10 wired remote control, showing its compact design and single control button.
5. Упутство за употребу
After successfully connecting the Z-10 remote control to your Antari fog or haze machine and powering on the machine:
- Allow the fog or haze machine to complete its warm-up cycle. The machine's indicator light will typically signal when it is ready for operation (refer to your machine's specific manual for details).
- To activate fog or haze output, press and hold the button on the Antari Z-10 remote control.
- To stop the output, release the button.
- If the machine stops producing output during continuous use, it may be reheating. Wait for the machine to reach its operating temperature again before pressing the button.
6. Одржавање
- Keep the remote control clean and dry. Use a soft, dry cloth to wipe its surface.
- Избегавајте испуштање даљинског управљача или његово излагање јаким ударцима.
- Store the remote control in a cool, dry place when not in use.
- Do not attempt to disassemble or repair the unit yourself. This will void any warranty and may cause damage.
КСНУМКС. Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Даљински не реагује | Loose or incorrect connection. Machine not powered or warmed up. Incompatible machine model. | Ensure the remote cable is securely connected to the machine. Verify the fog/haze machine is powered on and has completed its warm-up cycle. Confirm your machine model is listed as compatible. |
| Рад са прекидима | Loose cable connection. Damaged cable. | Check all cable connections for tightness. Inspect the cable for any visible damage. If damaged, discontinue use and seek replacement. |
8. Спецификације
- Модел: З-10
- Бренд: Антари
- Технологија повезивања: Виред
- Тип контролера: Контрола дугмета
- Посебна карактеристика: Ергономски дизајн
- Compatible Antari Machines: Z-800II, Z-1000II, Z-1020, B-100X, B-200, HZ-350
- Тежина артикла: Приближно 2 фунте (0.91 кг)
9. Гаранција и подршка
For detailed warranty information, technical support, or service inquiries regarding your Antari Z-10 wired remote control, please contact your authorized Antari dealer or visit the official Antari website. Please have your purchase receipt and product model number available when seeking support.