1. Увод
The Sharkoon RGB SLIDER WT is a versatile mid-tower PC case designed for optimal functionality and aesthetic appeal. It features an integrated RGB LED strip on the front panel, offering customizable lighting effects. The case supports various component configurations, including multiple cooling fan options and extensive storage capabilities. A tempered glass side panel provides a clear view унутрашњих компоненти.

Слика 1.1: Предња страна view of the Sharkoon RGB SLIDER WT PC Case, showcasing the RGB LED strip and tempered glass side panel.
2. Садржај пакета
Молимо вас да проверите да ли су све ставке присутне у пакету:
- Sharkoon RGB SLIDER WT PC Case
- 1x 120mm Rear Fan (pre-installed)
- Accessory Box (containing screws, cable ties, and this manual)
3. Спецификације
| Феатуре | Детаљ |
|---|---|
| Димензије (Д к Ш к В) | 40 к 19 к 45.6 цм |
| Тежина | 6 кг |
| Тип случаја | Миди Товер |
| Материјал бочне плоче | Каљено стакло |
| Метод хлађења | Ваздушно хлађење |
| Предњи И / О портови | 2x USB 3.0, 1x USB 2.0, Audio In/Out |
| Дриве Баис | 2x 3.5" HDD, 5x 2.5" SSD (2 shared with 3.5") |
| Максимална дужина ГПУ-а | 335mm (without front fans) |
| Максимална висина ЦПУ хладњака | 157мм |
| Мак ПСУ Ленгтх | 175мм |
| Унапред инсталирани вентилатори | 1x 120mm задњи вентилатор |
| Носач вентилатора (напред) | 3к 120мм |
| Подршка навијача (горе) | 2 x 120 мм или 2 x 140 мм |
| Носач вентилатора (задњи) | 1к 120мм |

Image 3.1: Diagram illustrating the dimensions of the Sharkoon RGB SLIDER WT PC Case.
4. Подешавање и инсталација
4.1. Припрема
Before beginning installation, ensure the PC case is placed on a stable, flat surface. Unpack all components and verify against the package contents list. It is recommended to wear an anti-static wrist strap to prevent damage to sensitive electronic components.
4.2. Инсталација матичне плоче
- Install the I/O shield into the designated slot at the rear of the case.
- Align the motherboard with the standoffs inside the case. Ensure the I/O ports align with the I/O shield.
- Причврстите матичну плочу помоћу приложених вијака.

Слика 4.1: Унутрашњост view of the PC case, showing the motherboard mounting area and pre-installed rear fan.
4.3. Инсталација јединице за напајање (PSU)
- Locate the PSU tunnel at the bottom rear of the case.
- Slide the PSU into the tunnel from the rear of the case, ensuring the fan faces downwards (if applicable, for bottom intake).
- Причврстите напајање завртњима са задње стране кућишта.
4.4. Инсталација уређаја за складиштење
The case supports 3.5" HDDs and 2.5" SSDs.
- 3.5" HDD-ови: Install into the drive cage located within the PSU tunnel.
- 2.5" SSD дискови: Mount onto the dedicated SSD trays behind the motherboard tray or on top of the PSU tunnel.

Image 4.2: Rear interior view, highlighting cable management options and locations for 2.5" SSDs and 3.5" HDD cage.
4.5. Expansion Card Installation (e.g., GPU)
- Уклоните потребне поклопце PCIe слотова са задње стране кућишта.
- Insert the expansion card into the corresponding PCIe slot on the motherboard.
- Secure the card with screws.
4.6. Fan Installation (Optional)
Additional fans can be installed at the front and top of the case.
- Предњи вентилатори: Remove the front panel to access the mounting points for up to three 120mm fans.
- Најбољи обожаваоци: Mount up to two 120mm or 140mm fans to the top panel.
4.7. Менаџмент каблова
Utilize the cutouts and tie-down points behind the motherboard tray to route and secure cables. This improves airflow and maintains a clean interior aesthetic.
5. Упутство за употребу
5.1. Укључивање
After all components are installed and cables connected, close the side panels. Connect the power cable to the PSU and a wall outlet. Press the power button on the top panel of the case to start your system.

Слика 5.1: Врх view of the case, detailing the front I/O panel with USB ports and audio jacks.
5.2. RGB контрола осветљења
The front RGB LED strip can be controlled in two ways:
- Built-in Controller: Use the dedicated RGB control button on the top panel to cycle through 14 preset lighting modes.
- Синхронизација ARGB матичне плоче: Connect the RGB cable from the case to a compatible 3-pin 5V ARGB header on your motherboard. The lighting can then be controlled via motherboard software (e.g., Asus Aura Sync, MSI Mystic Light Sync, Gigabyte Fusion, ASRock Polychrome SYNC).
5.3. Front Panel Ports
The front I/O panel provides convenient access to:
- 2x USB 3.0 ports for high-speed data transfer.
- 1x USB 2.0 port for general peripherals.
- Audio In (microphone) and Audio Out (headphone) jacks.
6. Одржавање
6.1. Чишћење
- Екстеријер: Обришите спољашње површине меком, дamp тканина. Избегавајте абразивна средства за чишћење.
- Филтери за прашину: Regularly remove and clean the dust filters (e.g., top magnetic filter, bottom PSU filter) to maintain optimal airflow and prevent dust buildup inside the case.
- Ентеријер: Користите компримовани ваздух да бисте уклонили прашину са унутрашњих компоненти и лопатица вентилатора. Уверите се да је систем искључен из струје пре чишћења унутрашњости.
6.2. Проток ваздуха
Ensure that the case has adequate clearance around it for proper airflow. Avoid blocking intake or exhaust vents. Regularly check fan operation to ensure they are spinning correctly.
КСНУМКС. Решавање проблема
7.1. Систем се не укључује
- Verify that the power cable is securely connected to both the PSU and the wall outlet.
- Ensure the PSU's power switch is in the 'ON' position.
- Check that the front panel power button cable is correctly connected to the motherboard's front panel header.
- Confirm all internal power connections (24-pin ATX, CPU power, GPU power) are secure.
7.2. Fans Not Spinning
- Check fan power connections to the motherboard or fan controller.
- Ensure fan headers are enabled in the motherboard BIOS/UEFI settings.
7.3. RGB осветљење не ради
- If using the built-in controller, press the RGB button to cycle modes.
- If using motherboard sync, ensure the ARGB cable is correctly connected to a 3-pin 5V ARGB header (not 4-pin 12V RGB).
- Verify that the motherboard's RGB software is installed and configured correctly.
7.4. USB/аудио портови на предњој плочи не раде
- Check that the USB 3.0, USB 2.0, and HD Audio cables from the front panel are securely connected to the corresponding headers on the motherboard.
- Ensure motherboard drivers are installed.
8. Гаранција и подршка
Sharkoon products are manufactured to high-quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Sharkoon website. For technical support, product inquiries, or service requests, please contact Sharkoon customer support through their official channels.
For further assistance, please visit the official Sharkoon webсајт: ввв.схаркоон.цом