HiQuick 8 Bay Smart Battery Charger Instruction Manual

Увод

This manual provides detailed instructions for the safe and efficient operation of your HiQuick 8 Bay Smart Battery Charger. Please read this manual thoroughly before use and retain it for future reference.

Садржај пакета:

• 1 x HiQuick 8 Bay Smart Battery Charger (Model: SW-8N)
• 4 x HiQuick AA 2800mAh Ni-MH Rechargeable Batteries
• 4 x HiQuick AAA 1100mAh Ni-MH Rechargeable Batteries
• КСНУМКС к УСБ кабел за пуњење типа Типе-Ц
• 1 к Упутство за употребу

Сетуп

Повезивање пуњача:

1. Connect the provided USB Type-C charging cable to the input port on the back of the charger.
2. Connect the other end of the USB cable to a compatible 5V 2A USB power source (e.g., a USB wall adapter, computer USB port, or power bank).
3. Ensure the power source is active. The LED indicators on the charger will briefly light up upon connection.

Упутство за употребу

Уметање батерија:

The charger features 8 independent charging slots, accommodating both AA and AAA Ni-MH/Ni-Cd rechargeable batteries. Each slot can charge batteries individually.

1. Insert the batteries into the charging slots, ensuring the positive (+) and negative (-) poles match the indicators on the charger.
2. The charger can charge 1 to 8 batteries simultaneously.

Статус ЛЕД индикатора:

Време пуњења:

• AAA 1100mAh batteries: Approximately 2 hours for 1-8 batteries.
• AA 2800mAh batteries: Approximately 4.5 hours for 1-8 batteries.

Одржавање

Одржавање батерије:

• Store batteries in a cool, dry place away from direct sunlight or high temperatures.
• For long-term storage, it is recommended to charge batteries once every 3 months to maintain optimal performance and prevent damage.
• Avoid mixing old and new batteries, or different types/brands of batteries, when using them in devices.

Брига о пуњачу:

• Држите пуњач чистим и без прашине. Користите меку, суву крпу за чишћење.
• Do not disassemble or reassemble the charger, as it may cause short-circuit or fire hazard.
• Do not expose the charger to water or excessive humidity.

Решавање проблема

Уобичајени проблеми:

• Batteries not charging (LED not red):
  • Уверите се да је USB кабл безбедно повезан и са пуњачем и са извором напајања.
  • Verify the power source is active and providing 5V 2A output.
  • Проверите да ли су батерије уметнуте са исправним поларитетом (+/-).
  • Confirm batteries are Ni-MH/Ni-Cd rechargeable type. Alkaline or non-rechargeable batteries will not charge.
  • Ако је батерија волtage is lower than 0.9V, the charger may not activate. Try removing and reinserting the battery.
• Charger or batteries getting hot:
  • This is normal during the charging process, but excessive heat may indicate an issue. Ensure proper ventilation around the charger.
  • Ако се прегревање настави, прекините употребу и контактирајте подршку.
• LED remains red after extended charging time:
  • The battery might be defective or has reached its end of life. Try charging another battery to confirm charger functionality.

Спецификације

Гаранција и подршка

HiQuick products typically come with a 30-day money-back guarantee and a 1-year warranty. For specific warranty details or technical support, please refer to the warranty card included in your package or visit the official HiQuick webсајту.

For customer service inquiries, please contact HiQuick support via their official webсајт или контакт информације које су наведене у паковању вашег производа.

Такође можете посетити HiQuick Store on Amazon за више информација.