Compustar 2WT13R-SF
Compustar 2WT13R-SF 2-Way Color LCD Remote User Manual
Model: 2WT13R-SF | Brand: Compustar
Увод
This manual provides essential information for the proper use and maintenance of your Compustar 2WT13R-SF 2-Way Color LCD Remote. This remote is designed to provide advanced control and feedback for compatible Compustar vehicle security and remote start systems.
Компатибилност
Важна напомена о компатибилности:
- This remote ONLY works with the Compustar PRO-T13 System. It will NOT work with other systems.
- You MUST HAVE Compustar Antenna Model АНТ-2ВСФ for this remote to function correctly.
Ensure your existing system meets these requirements before attempting to use this remote.
Производ је завршенview
Кључне карактеристике
- 2-Way Communication: Receive instant confirmation on the remote's LCD screen.
- Color LCD Display: Provides clear visual feedback on vehicle status.
- Up to 3 Mile Range: Extended operating range for convenience.
- Ergonomic Design: Comfortable to hold and use.
- Real-time Vehicle Status: Displays battery voltage and interior temperature (if supported by system).
Даљинске компоненте
The Compustar 2WT13R-SF remote features a vibrant color LCD screen and intuitive buttons for controlling your vehicle's functions.

Слика: Фронт view of the Compustar 2WT13R-SF remote, displaying its color LCD screen with vehicle status icons and control buttons.

Слика: Под углом view of the Compustar 2WT13R-SF remote, showcasing its sleek design and button placement.
Сетуп
This remote is a replacement or additional remote for an existing Compustar PRO-T13 system. It requires programming to your vehicle's system to function.
Important: This package DOES NOT INCLUDE programming instructions. You must use the instructions that came with your PRO-T13 system or consult a certified Compustar installer for programming.
Typically, programming involves a sequence of steps using the vehicle's ignition and the remote's buttons. Refer to your PRO-T13 system's installation or user manual for detailed programming procedures.
Операција
The 2WT13R-SF remote provides intuitive control over your vehicle's functions. The exact functions and button presses may vary slightly based on your PRO-T13 system's configuration.
Основне функције:
- закључавање: Притисните тастер Закључај button (usually indicated by a closed padlock icon) once to lock your vehicle's doors. The remote will provide visual and audible confirmation.
- Откључај: Притисните тастер Откључај button (usually indicated by an open padlock icon) once to unlock your vehicle's doors. Confirmation will be displayed on the LCD.
- Даљинско покретање/заустављање: Притисните и држите Старт/Стоп button (often a power icon) for approximately 2-3 seconds to remote start or stop your vehicle. The LCD will show engine status.
- Отпуштање пртљажника: Притисните и држите Пртљажник button (if available, usually an open trunk icon) for 2-3 seconds to pop the trunk.
- Паника: Притисните и држите Паника button (if available, often a horn icon) for 2-3 seconds to activate the vehicle's alarm. Press again to disarm.
Refer to your PRO-T13 system manual for advanced features, custom button programming, and detailed LCD icon explanations.
Одржавање
Замена батерије:
The 2WT13R-SF remote uses a replaceable battery. When the battery icon on the LCD indicates low power, or the remote's range decreases significantly, it's time to replace the battery.
- Пронађите одељак за батерије на полеђини даљинског управљача.
- Carefully open the compartment using a small flat-head screwdriver or a coin.
- Note the orientation of the old battery and remove it.
- Insert a new battery (typically a CR2032 coin cell, but verify with your PRO-T13 manual or the remote's markings) with the positive (+) side facing up.
- Добро затворите одељак за батерије.
Нега и чишћење:
- Избегавајте излагање даљинског управљача екстремним температурама, директној сунчевој светлости током дужег периода или прекомерној влази.
- Очистите даљински управљач меком, сувом крпом. Не користите јаке хемикалије или абразивна средства за чишћење.
- Protect the LCD screen from scratches. Consider purchasing a protective case.
Решавање проблема
Уобичајени проблеми и решења:
- Даљински не реагује:
- Check the remote's battery and replace if low.
- Ensure you are within range of the vehicle and the ANT-2WSF antenna.
- Verify the remote is properly programmed to your PRO-T13 system. If unsure, consult your system's manual or a professional installer.
- Short Operating Range:
- Replace the remote's battery.
- Ensure there are no major obstructions (buildings, hills) between the remote and the vehicle.
- Check for sources of radio interference in the area.
- Проблеми са ЛЦД екраном:
- If the display is dim or flickering, replace the battery.
- If the display is blank, ensure the remote is powered on (if applicable) and the battery is charged.
For persistent issues, contact Compustar customer support or a certified Compustar dealer.
Спецификације
| Феатуре | Детаљ |
|---|---|
| Број модела | 2ВТ13Р-СФ |
| Бранд | Compustar |
| Технологија повезивања | Инфрацрвени (Note: While listed as Infrared, remote start systems typically use Radio Frequency for primary communication.) |
| Компатибилни уређаји | Compustar PRO-T13 System |
| Максимални број подржаних уређаја | 1 (по даљинском управљачу) |
| Посебна карактеристика | Ергономски |
| Тежина артикла | 1.76 унци |
| Димензије пакета | 4.53 к 2.44 к 1.18 инча |
| Датум првог доступног | 24. марта 2021. године |
Гаранција и подршка
This Compustar product is covered by the manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your original Compustar PRO-T13 system or visit the official Compustar webсајту.
For technical support, troubleshooting assistance beyond this manual, or to locate a certified installer, please contact Compustar customer service or your authorized Compustar dealer.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.