BESTTEN Almond Dimmer Light Switch User Manual
Model: LUXDMWK600-12-3
For Dimmable LED, Halogen, and Incandescent Bulbs
1. Производ је готовview
The BESTTEN Almond Dimmer Light Switch is designed to provide adjustable lighting levels for various bulb types. It supports both single-pole and 3-way applications and includes a decorator wall plate. This dimmer features a memory function to recall the last dimmed setting and an adjustable dimming range to prevent flickering.
Figure 1: BESTTEN Almond Dimmer Light Switch with included wall plate.
2. Садржај пакета
- Диммер Свитцхес
- Сцревс
- Валлплатес
3. Безбедносне информације
- УПОЗОРЕЊЕ: Да бисте избегли пожар, струјни удар или смрт, искључите напајање на прекидачу или кутији са осигурачима и проверите да ли је напајање искључено пре ожичења.
- Инсталирајте у складу са свим националним и локалним електричним прописима.
- Use only with compatible dimmable bulbs (LED, CFL, Incandescent, Halogen).
- Do not use with non-dimmable bulbs or motor-driven appliances like fans.
- Only one dimmer switch can be installed in a 3-way circuit.
4. Упутства за инсталацију
4.1 Wiring for Single-Pole Application
A single-pole application controls a light fixture from one location. Ensure power is off before proceeding.
Figure 2: Single-pole wiring diagram. Connect the hot wire to the silver screw, the load wire to the brass screw, and the ground wire to the green screw. No neutral wire is required.
4.2 Wiring for 3-Way Application
A 3-way application controls a light fixture from two locations. Only one dimmer switch can be installed in a 3-way circuit. Ensure power is off before proceeding.
Figure 3: 3-way wiring diagram. Connect the hot wire to the silver screw, the load wire to one brass screw, and the traveler wire to the other brass screw. Connect the ground wire to the green screw. No neutral wire is required.
4.3 Dimming Range Adjustment
This dimmer features an adjustable dimming range to optimize performance and eliminate flickering with various dimmable LED/CFL bulbs. Follow these steps to adjust the dimming range:
- Укључите прекидач и померите клизач на најнижу (крајњу леву) поставку.
- Rotate (counter-clockwise) the sensitivity dial (located on the side of the switch) all the way up. НАПОМЕНА: If the dial stops in either direction, do not force it.
- Rotate (clockwise) the sensitivity dial down slowly until the preferred lowest light level is achieved and the lights are not flickering.
Figure 4: Location of the sensitivity dial for dimming range adjustment.
Video 1: Demonstration of the dimming range setting process to eliminate flickering.
5. Операција
- Он/Офф: Press the top or bottom of the rocker switch to turn the lights on or off.
- Затамњење: Use the horizontal slider to adjust the light intensity. Move the slider up for brighter light and down for dimmer light.
- Функција меморије: The switch remembers the last dimmed light setting and will turn on to that exact light level when activated.
6. Компатибилност
This dimmer switch is universally compatible with most dimmable LED, CFL, incandescent, and halogen bulbs.
- ЛЕД/ЦФЛ са могућношћу затамњивања: Up to 150 Watts (minimum load: 3W)
- Жаруља/халоген: До 600 вати
Figure 5: Bulb compatibility and wattagе оцене.
7. Димензије производа
Figure 6: Product dimensions. The switch measures approximately 4.13 x 2.12 x 1.35 inches. Ensure your electrical box has a depth of at least 2 inches for proper fit.
8. Спецификације
| Феатуре | Спецификација |
|---|---|
| Оперативни режим | ОН-ОФФ |
| Цуррент Ратинг | 15 Amps |
| Оператинг Волtage | 120 Волтс |
| Тип контакта | Жице |
| Тип конектора | Цримп |
| Бранд | БЕСТТЕН |
| Тип прекидача | Диммер |
| Терминал | Сцрев |
| Материјал | Polycarbonate, Brass (Contact Material) |
| Димензије артикла (Д к Ш к В) | 4.13 к 2.12 к 1.35 инча |
| Цирцуит Типе | 3-way (also supports Single-Pole) |
| Тип монтаже | Валл Моунт |
| Ацтуатор Типе | Роцкер |
| Горња оцена температуре | 40 степени Целзијуса |
| Ватtagе (LED/CFL са могућношћу димирања) | Max. 150W (Min. Load: 3W) |
| Ватtagе (жарна сијалица) | Макс. КСНУМКСВ |
| Боја | Бадем |
| Оцена међународне заштите | ИП20 |
| Спецификација Мет | UL |
| Број модела | LUXDMWK600-12-3 |
КСНУМКС. Решавање проблема
- Светла која трепере: If your lights are flickering, rotate the side adjustment wheel (sensitivity dial) as described in Section 4.3 to fine-tune the dimming range. Dimmable LEDs may not dim the same as incandescent or halogen bulbs, and their dimming range can vary by manufacturer.
- Lights Not Turning On/Off Consistently (3-Way): In 3-way applications, ensure the line and load wires are correctly identified and connected. Incorrect wiring can cause inconsistent operation or flickering. Only one dimmer switch should be installed in a 3-way circuit.
- Switch Does Not Fit in Electrical Box: The dimmer switch has dimensions of 4.13 x 2.12 x 1.35 inches. Ensure your electrical box has a depth of at least 2 inches to accommodate the switch.
10. Одржавање
Да бисте очистили прекидач за пригушивање и зидну плочу, обришите их меком крпомamp крпа. Не користите абразивна средства за чишћење или раствараче. Уверите се да је напајање искључено пре чишћења.
11. Гаранција и подршка
За информације о гаранцији или техничку подршку, обратите се званичном сервису произвођача website or contact their customer service. Keep your purchase receipt for proof of purchase.