SKYSHL SS322T-2G1 Single Mode OTDR Fiber Tester Instruction Manual

1. Производ је готовview

The SKYSHL SS322T-2G1 is a high-performance Single Mode Optical Time Domain Reflectometer (OTDR) designed for comprehensive fiber optic network testing. It integrates multiple essential functions including OTDR, Optical Power Meter (OPM), Optical Light Source (OLS), Visual Fault Locator (VFL), Event Map, and APP Module connectivity. With 1310nm and 1550nm wavelengths and a dynamic range of 49dB, it is capable of testing distances up to 280km (174 miles). The device features a 7-inch touch screen for intuitive operation and supports various connector types, making it a versatile tool for fiber optic professionals.

Слика 1: Предња страна view of the SKYSHL SS322T-2G1 OTDR Fiber Tester, showcasing its 7-inch touch screen interface.

2. Безбедносне информације

Please read all safety instructions carefully before operating the device. Failure to follow these instructions may result in injury or damage to the device.

• Ласерска безбедност: This device uses lasers. Do not look directly into the optical output ports when the device is active. Laser radiation can cause severe eye damage.
• Извор напајања: Use only the specified power adapter and battery. Incorrect power sources can damage the device or cause fire.
• Руковање: Пажљиво рукујте уређајем. Избегавајте испуштање или излагање јаким ударцима.
• Окружење: Не излажите уређај екстремним температурама, влази или корозивним срединама.
• Одржавање: Refer to the maintenance section for cleaning and care. Do not attempt to disassemble or repair the device yourself.

3. Садржај пакета

Проверите да ли су све ставке присутне у пакету:

• 1x OTDR Set (main unit)
• 2x Fiber Optic Patch Cords (1*SM FC/UPC-FC/UPC + 1*SM FC/UPC-FC/APC)
• Various Connectors (FC-SC, FC-ST, FC-FC, FC-LC)
• УСБ кабл
• Повер Адаптер
• Упутство за употребу
• Брисеви за чишћење
• Торба за ношење

Figure 2: Included accessories and the main unit of the SKYSHL SS322T-2G1 OTDR Fiber Tester.

4. Кључне карактеристике

• Dual Wavelengths & High Dynamic Range: 1310nm+1550nm with 49dB+49dB dynamic range, supporting test distances up to 280km.
• Multi-Function Integration: Combines OTDR, Optical Power Meter (OPM), Optical Light Source (OLS), and Visual Fault Locator (VFL) in one handheld device.
• Short Dead Zones: Event Dead Zone (EDZ) of 0.5m (typical for SM) and Attenuation Dead Zone (ADZ) of 3.0m (typical for SM) for precise fault detection.
• Интелигентно функционисање: Features automatic testing, scheduled testing, and event mapping for simplified use.
• Smart APP & PC Software: Supports connectivity to Android phones/tablets and Windows PCs for real-time data viewing, sharing, analysis, and saving.
• Broad Connector Compatibility: Includes adapters for SC/UPC, ST/UPC, FC/UPC, LC/UPC, SC/APC, ST/APC, FC/APC, and LC/APC.
• Управљање подацима: Allows saving test traces to SD card and USB flash disk, supports EI&SOR format, one-click screenshot, and one-click PDF generation.

5. Device Layout and Interfaces

Familiarize yourself with the physical components and connection ports of the SS322T-2G1.

Слика 3: Врх view of the device showing the VFL, OTDR, and OPM ports, along with USB and Ethernet ports.

• Optical Ports: Dedicated ports for OTDR, VFL, and OPM functions. Ensure correct fiber connection to the appropriate port.
• УСБ портови: Type A and Type B USB ports for connecting USB disks, external devices, or connecting to a computer.
• Мицро СД слот: За проширење капацитета складиштења.
• Етхернет порт: For network connectivity and functions like PING test.
• Дугме за напајање: Located on the front panel for turning the device on/off.
• Дугмад за навигацију: Arrow keys and OK button for menu navigation and selection.
• 7-инчни екран осетљив на додир: Primary interface for all operations and data display.

6. Подешавање

6.1 Почетно укључивање

1. Притисните и држите дугме за напајање док се уређај не укључи.
2. The device will display the boot screen and then the main menu.

6.2 Подешавања језика и времена

To configure language and time:

1. From the main menu, tap on the Систем икона.
2. Дођите до Општа подешавања.
3. Изаберите Језик and choose 'English'.
4. Подесите Време подешавања по потреби.

6.3 Network Settings (Optional)

To connect to a Wi-Fi network for APP module functionality:

1. Фром тхе Систем menu, tap on Мрежна подешавања.
2. Enable Wi-Fi and scan for available networks.
3. Select your desired network and enter the password to connect.

Figure 4: The network settings interface on the SS322T-2G1, showing options for IP, Mask, Gateway, and Wi-Fi connection.

7. Упутство за употребу

7.1 OTDR Testing

The OTDR function is used to characterize optical fibers. Ensure the fiber under test is clean and properly connected.

1. From the main menu, tap on the ОТДР икона.
2. Connect the fiber to the OTDR port. Ensure the connector type matches (UPC/APC). Use appropriate adapters if necessary.
3. Додирните Сетуп to configure test parameters.
4. Изаберите жељену Таласна дужина (1310nm or 1550nm).
5. Изаберите Режим (Auto-Test for automatic parameter selection or Manual for custom settings).
6. Подесите Авг. Време (averaging time), Домет, и Пулсе Видтх if in Manual mode.
7. Додирните Тест or Просечно да бисте започели мерење.
8. The OTDR trace will be displayed on the screen, showing events like splices, connectors, and fiber ends.

Слика 5: Прample of 1310nm and 1550nm graphics analysis on the OTDR screen, detailing events and their characteristics.

7.2 Мерач оптичке снаге (OPM)

The OPM measures the optical power of a fiber optic signal.

1. From the main menu, tap on the ОПМ икона.
2. Connect the fiber to the OPM port.
3. Select the desired wavelength (850nm to 1650nm).
4. The screen will display the measured optical power in dBm or mW.

7.3 Optical Light Source (OLS)

The OLS provides a stable light source for various fiber optic tests.

1. From the main menu, tap on the ОЛС икона.
2. Connect the fiber to the OLS port.
3. Select the desired wavelength (1310nm or 1550nm).
4. Choose the output mode (CW, 270Hz, 1kHz, 2kHz).
5. Додирните Почни to activate the light source.

7.4 Визуелни локатор грешака (VFL)

The VFL emits a visible red laser to quickly locate breaks, bends, and faulty connectors in fiber optic cables.

1. From the main menu, tap on the ВФЛ икона.
2. Connect the fiber to the VFL port.
3. Додирните Почни to activate the VFL.
4. Observe the fiber for any visible red light leakage, indicating a fault.

7.5 Мапа догађаја

The Event Map function provides a simplified, graphical representation of the fiber link, making it easier to identify and locate events without detailed trace analysis.

1. After performing an OTDR test, tap on the Мапа догађаја icon (if available in your UI version) or navigate to the analysis section.
2. The map will display icons representing different events (e.g., splices, connectors, fiber ends) and their distances.

Figure 6: Diagram illustrating various OTDR test event types such as splicing points, adapters, fractures, and fiber ends, as displayed on the test curve.

7.6 Управљање подацима

The SS322T-2G1 allows for efficient management of test data.

1. Савинг Files: After a test, tap Сачувај to store the trace data. You can choose to save to internal memory, SD card, or a connected USB disk.
2. Лоадинг Files: Додирните File to browse and load previously saved test files.
3. Трансферинг Files: Use the USB Type A port to connect a USB flash drive for easy transfer of files between the device and external storage.
4. PDF Report Generation: The device supports one-click PDF report generation for professional documentation of test results.

7.7 APP Module Connectivity

The Smart APP module allows for enhanced functionality and remote interaction with the device.

1. Ensure the device is connected to Wi-Fi (refer to Section 6.3).
2. Install the SKYSHL APP on your Android device (currently Android only) or Windows PC.
3. Follow the APP's instructions to connect to the SS322T-2G1.
4. Сада можете view, share, analyze, and save test data in real-time from your connected device.

8. Одржавање

Proper maintenance ensures the longevity and accuracy of your SS322T-2G1 OTDR.

• Cleaning Optical Ports: Regularly clean the optical ports and fiber connectors using the provided cleaning swabs and appropriate fiber optic cleaning solutions. Dust and debris can significantly affect measurement accuracy.
• Чишћење екрана: Use a soft, lint-free cloth to clean the touch screen. Avoid abrasive materials or harsh chemicals.
• Одржавање батерије: Charge the device regularly. For long-term storage, ensure the battery is partially charged (around 50%) and store in a cool, dry place. Avoid fully discharging the battery for extended periods.
• Ажурирања софтвера: Проверите произвођача website periodically for software updates to ensure optimal performance and access to new features.
• Складиштење: When not in use, store the device in its carrying bag to protect it from dust, moisture, and physical damage.

КСНУМКС. Решавање проблема

This section addresses common issues you might encounter with your SS322T-2G1 OTDR.

10. Техничке спецификације

11. Гаранција и подршка

SKYSHL provides a 3-year free replacement warranty for the SS322T-2G1 OTDR Fiber Tester, along with lifetime maintenance. For any technical assistance, troubleshooting, or warranty claims, please contact SKYSHL customer support. A professional technical support team is available 24 hours a day to assist you.

For further information, please visit the official SKYSHL webсајт или погледајте контакт податке наведене на паковању вашег производа.