SilverStone Technology SST-AD120-DC 120W DC to DC Board and AC to DC Adapter Combo Kit User Manual

1. Увод и крајview

The SilverStone SST-AD120-DC is a highly reliable, fully compliant DC to DC ATX power supply unit designed for Small Form Factor (SFF) systems. This combo kit includes a 120W DC-DC power board and a 120W AC to DC power adapter, providing a continuous output of 120W. It features a Mylar insulation design for easy installation and multiple built-in protection circuits to ensure maximum safety during operation.

Figure 1: SilverStone SST-AD120-DC DC to DC Board and AC to DC Adapter Combo Kit.

2. Безбедносне информације

Please read and understand all safety instructions before installing or operating the SST-AD120-DC. Failure to follow these instructions may result in electric shock, fire, or damage to the product or connected devices.

• Always disconnect power from the wall outlet before performing any installation, maintenance, or troubleshooting.
• Do not expose the product to moisture, rain, or extreme temperatures.
• Ensure proper grounding for all connected components.
• This product is intended for use with personal computers. Do not use it for purposes other than its intended design.
• За оптималну безбедност и перформансе препоручује се професионална инсталација.
• Предлог 65 Упозорење: Овај производ може садржати хемикалије за које држава Калифорнија зна да изазивају рак и урођене недостатке или другу репродуктивну штету.

3. Садржај пакета

Проверите да ли се у вашем пакету налазе све ставке наведене у наставку:

• 1 x SilverStone SST-AD120-DC 120W DC to DC Power Board
• 1 x 120W AC to DC Power Adapter with AC power cord
• 1 x ATX 20+4-pin Main Power Connector Cable
• 1 x CPU 4+4-pin Power Connector Cable
• 1 x Peripheral 4-pin Power Connector Cable
• 3 x SATA Power Connector Cables (on a single strand)
• 1 x Mounting Bracket (if included in your specific kit)

Figure 2: Included power cables for the SST-AD120-DC.

4. Подешавање и инсталација

Follow these steps to install your SilverStone SST-AD120-DC power supply unit:

1. Припремите свој систем: Ensure your computer system is completely powered off and disconnected from the AC power outlet. Open your computer case to access the motherboard and drive bays.
2. Install the DC-DC Power Board: Mount the 120W DC-DC power board securely within your computer case. The Mylar insulation design facilitates easy installation. Ensure it is positioned to allow for proper cable routing and airflow.
3. Connect Main Power (ATX 20+4-pin): Connect the 20+4-pin main power cable from the DC-DC board to the corresponding ATX power connector on your motherboard. Ensure the connection is firm and fully seated.
4. Connect CPU Power (4+4-pin): Connect the 4+4-pin CPU power cable to the CPU power connector on your motherboard. This is typically located near the CPU socket.
5. Connect Peripheral Power (4-pin): If your system requires it, connect the Peripheral 4-pin power cable to devices such as case fans or older drives.
6. Повежите SATA напајање: Connect the SATA power cables to your SATA hard drives, solid-state drives, or optical drives. The kit includes cables with multiple SATA connectors.
7. Connect AC to DC Adapter: Plug the DC output cable from the 120W AC to DC power adapter into the DC input port on the SST-AD120-DC power board.
8. Сигурни каблови: Route and secure all cables to ensure they do not obstruct airflow or interfere with other components.
9. Затворите кућиште и повежите наизменичну струју: Close your computer case. Plug the AC power cord into the 120W AC to DC power adapter, and then plug the adapter into a grounded AC wall outlet.

Слика 3: Завршеноview of connector types included with the SST-AD120-DC.

Слика 4: Крупни план view of the SST-AD120-DC power board.

5. Упутство за употребу

Once the SST-AD120-DC is correctly installed and connected, you can power on your system:

• Press the power button on your computer case. The system should initiate its boot sequence.
• Ensure all components receive power and function correctly.
• To power off, use the standard shutdown procedure of your operating system.

6. Одржавање

The SilverStone SST-AD120-DC is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure longevity:

• Одржавати уредним одржавати чистим: Periodically clean the interior of your computer case to prevent dust buildup on the power board and other components. Use compressed air to gently remove dust.
• Осигурајте вентилацију: Make sure your computer case has adequate airflow to prevent overheating. Do not block ventilation openings.
• Нема делова које може да сервисира корисник: The SST-AD120-DC contains no user-serviceable parts. Do not attempt to open or repair the unit, as this will void the warranty and may pose a safety risk.

КСНУМКС. Решавање проблема

If you encounter issues with your SST-AD120-DC, refer to the following troubleshooting steps:

• Нема напајања:
  • Check if the AC power cord is securely plugged into the wall outlet and the AC to DC adapter.
  • Verify that the DC output cable from the adapter is firmly connected to the DC-DC power board.
  • Ensure all power cables (20+4-pin, 4+4-pin CPU, SATA, Peripheral) are correctly and securely connected to the motherboard and components.
  • Test the AC outlet with another device to confirm it is functional.
• System Instability or Random Shutdowns:
  • Confirm that your system's total power consumption does not exceed the 120W output capacity of the SST-AD120-DC.
  • Check for any loose cable connections inside the computer case.
  • Ensure adequate ventilation to prevent overheating of components.
• Protection Circuitry Activation:
  • The SST-AD120-DC has built-in multiple protection circuits. If the system unexpectedly shuts down, disconnect the AC power, wait a few minutes, and then check for any short circuits or faulty components before reconnecting power.

If the problem persists after following these steps, please contact SilverStone customer support for further assistance.

8. Спецификације

9. Гаранција и подршка

гаранција: The SilverStone SST-AD120-DC comes with a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

Корисничка подршка: For technical assistance, troubleshooting, or warranty inquiries, please visit the official SilverStone Technology website or contact their customer support department directly. Contact information can typically be found on the SilverStone webсајт или паковање производа.