Yaheetech 4-Piece White Dining Chairs Instruction Manual

1. Увод

This manual provides comprehensive instructions for the assembly, safe use, and proper maintenance of your Yaheetech 4-piece dining chairs. These chairs are designed with a high back, comfortable leather-look seat, sturdy wood legs, and a waterproof surface, making them suitable for indoor use in dining rooms, kitchens, or restaurants.

Image 1.1: Yaheetech 4-Piece White Dining Chairs in a dining room setting.

2. Безбедносне информације

• Само за унутрашњу употребу: These chairs are designed exclusively for indoor environments. Exposure to outdoor elements may cause damage and void the warranty.
• Капацитет тежине: Do not exceed the maximum weight capacity of 135 kg (297.6 lbs) per chair. Overloading can lead to structural failure and injury.
• Опрез при монтажи: Exercise caution during assembly. Ensure all parts are correctly aligned and fasteners are securely tightened to prevent instability.
• Заштита пода: Use anti-skid protection or felt pads on the chair legs to prevent slipping and protect floor surfaces from scratches or damage.
• Редовна инспекција: Periodically check all bolts and connections to ensure they remain tight. Re-tighten as necessary.
• Избегавајте стајање: Do not stand on the chairs. They are designed for seating purposes only.

3. Садржај пакета

Пре почетка монтаже, проверите да ли су све доле наведене компоненте присутне и да ли су неоштећене. Ако неки делови недостају или су оштећени, обратите се корисничкој подршци.

• 4 x Наслона за столице
• 4 x Седишта за столице
• 16 x Chair Legs (4 per chair)
• Пакет хардвера (шрафови, подлошке, имбус кључ)
• 1 к Упутство за употребу

Image 3.1: Key components and features of the dining chair.

4. Упутство за монтажу

Assembly typically requires two people. Please follow these steps carefully:

1. Распакујте компоненте: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface (e.g., carpet or a blanket) to prevent scratches.
2. Идентификујте делове: Refer to the parts list in Section 3 to identify each component.
3. Причврстите ноге на седиште: Align the pre-drilled holes on each chair leg with the corresponding holes on the underside of the chair seat. Insert the provided screws and washers.
4. Сигурне ноге: Using the Allen wrench, hand-tighten all screws initially. Do not fully tighten until all legs are in place.
5. Причврстите наслон: Connect the backrest to the seat frame, ensuring proper alignment. Insert and hand-tighten the screws.
6. Завршно затезање: Once all components are assembled, place the chair upright on a level surface. Apply gentle pressure to the seat, then fully tighten all screws. This helps ensure the chair is level and stable.
7. Проверите стабилност: Gently rock the chair to ensure it is stable and does not wobble. If wobbling occurs, loosen the screws slightly, adjust the chair on a flat surface, and re-tighten.

5. Упутства за употребу

These dining chairs are designed for comfortable and functional use in your home or commercial setting.

• Седиште: Use the chairs for seating purposes only. Avoid standing on them or using them as step stools.
• Пласман: Position chairs on a flat, stable surface to prevent tipping.
• Дистрибуција тежине: Distribute weight evenly on the seat. Avoid placing excessive weight on the edges or backrest.
• Кретање: When moving chairs, lift them rather than dragging them to prevent damage to legs and floor surfaces.

Image 5.1: Demonstration of the high-density foam for comfort.

6. Нега и одржавање

Proper care will extend the life and appearance of your dining chairs.

• Чишћење: The PVC leather surface is waterproof. Wipe clean with a soft, damp cloth. For stubborn stains, use a mild soap solution and immediately wipe dry. Avoid abrasive cleaners or harsh chemicals.
• Просипање: Promptly clean up any spills to prevent staining, especially on the wood legs.
• Излагање сунчевој светлости: Avoid prolonged direct sunlight exposure, which can cause the PVC leather to fade or crack over time.
• Извори топлоте: Keep chairs away from direct heat sources like radiators or fireplaces to prevent material damage.
• Нега ногу: For the wood legs, wipe with a dry cloth. If necessary, use a wood-safe cleaner.

Image 6.1: Waterproof PVC leather surface for easy cleaning.

КСНУМКС. Решавање проблема

If you encounter any issues with your dining chairs, refer to the following common problems and solutions:

Issue: Chair wobbles after assembly.

• Решење 1: Ensure all screws are fully tightened. Loosen them slightly, place the chair on a flat surface, apply gentle pressure to the seat, and then re-tighten all screws.
• Решење 2: Check if the floor surface is uneven. Try moving the chair to a different spot or using shims under the legs if necessary.

Issue: Screws become loose over time.

• решење: This is normal for furniture. Periodically (e.g., every 3-6 months) check and re-tighten all assembly screws to maintain stability.

Issue: Scratches on the floor.

• решење: Ensure anti-skid pads are properly installed on all chair legs. Replace worn pads as needed.

8. Спецификације производа

Image 8.1: Dining chair dimensions.

9. Видео демонстрација

Watch this official product video for a visual guide on the features and design of the Yaheetech 4-piece PU leather dining chairs.

10. Гаранција и подршка

Yaheetech provides customer support for its products. While specific warranty details are not provided in this manual, the product typically includes a 30-day easy return policy. For any questions, concerns, or to report missing/damaged parts, please contact the seller or manufacturer directly through your purchase platform.

Молимо вас да сачувате рачун о куповини за евентуалне рекламације или упите у вези са гаранцијом.