Упутство за употребу IROAD NX7 камере за аутомобил

Увод

This manual provides detailed instructions for the installation, operation, and maintenance of your IROAD NX7 Dash Cam. The IROAD NX7 is a high-performance 2-channel Full HD 1080P dash camera designed to record driving footage and provide parking surveillance. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

Садржај пакета

Проверите да ли су све ставке присутне у пакету:

• IROAD NX7 Main Unit (Front Camera)
• Задња камера
• Кабл за повезивање задње камере
• OBD-II Power Cable (for general and hybrid vehicles)
• 16ГБ МицроСД картица
• Кориснички приручник (овај документ)
• Adhesive Mounts
• Кабл за пуњење
• GPS Antenna (optional add-on)

Image: IROAD NX7 Dash Cam main unit and rear camera, illustrating the primary components included in the package.

Производ је завршенview

Упознајте се са компонентама и њиховим функцијама.

Image: Detailed diagram showing the front camera (main unit) and rear camera with labeled parts such as camera lens, security LED, operation LED, bracket, DC-IN power terminal, GPS terminal, power switch, memory card slot, front terminal, and rear camera lens.

Main Unit (Front Camera)

• Објектив предње камере: Записи view through the front windshield.
• Сигурносна ЛЕД лампица: Indicates recording status and acts as a security deterrent.
• ЛЕД за рад: Shows the device's operational status.
• 3-inch Touch Panel Display: За viewинг ливе фооtage, playback, and accessing settings.
• Утор за мицроСД картицу: Insert the provided MicroSD card for video storage.
• Прекидач: Да бисте укључили или искључили уређај.
• DC-IN Power Terminal: Повезује се са каблом за напајање.
• GPS Terminal: Connects to the optional GPS antenna for location and speed data.
• Rear Camera Terminal: Connects the rear camera cable.

Задња камера

• Објектив задње камере: Записи view through the rear windshield.
• ЛЕД за рад: Indicates the rear camera's operational status.

Сетуп

1. Уметање MicroSD картице

1. Уверите се да је камера у аутомобилу искључена.
2. Locate the MicroSD card slot on the side of the main unit.
3. Insert the provided 16GB MicroSD card into the slot until it clicks into place. Ensure the correct orientation.

2. Main Unit Installation (Front Camera)

1. Clean the area on your front windshield where you intend to mount the dash cam.
2. Attach the adhesive mount to the main unit.
3. Remove the protective film from the adhesive mount.
4. Firmly press the dash cam onto the chosen spot on the windshield, ensuring a clear view of the road. Position it centrally, behind the rearview mirror if possible, to avoid obstructing your view.

3. Инсталација задње камере

1. Clean the area on your rear windshield for the rear camera.
2. Attach the adhesive mount to the rear camera.
3. Remove the protective film and firmly press the rear camera onto the rear windshield, ensuring a clear view.
4. Connect the rear camera to the main unit using the provided rear camera connection cable. Route the cable neatly along the vehicle's headliner and pillars to conceal it.

4. Power Connection (OBD-II)

1. Пронађите OBD-II порт вашег возила (обично испод контролне табле са стране возача).
2. Connect the OBD-II power cable to the OBD-II port.
3. Connect the other end of the OBD-II power cable to the DC-IN power terminal on the main unit.
4. Route the power cable neatly to avoid interference with driving controls.

5. GPS Antenna Connection (Optional)

1. If using the optional GPS antenna, connect it to the GPS terminal on the main unit.
2. Монтирајте GPS антену на место са јасним view of the sky, typically on the dashboard or near the windshield.

Упутство за употребу

Укључивање/искључивање

• Укључено: Once connected to power, the dash cam will automatically power on when the vehicle's ignition is turned on.
• Искључивање: The dash cam will automatically power off when the vehicle's ignition is turned off. You can also manually power off using the power switch.

Режими снимања

The IROAD NX7 supports various recording modes:

• Континуирано снимање: Automatically starts recording when the device powers on. Footage is saved in short segments and overwritten by new recordings once the MicroSD card is full (loop recording).
• Event Recording (Impact Recording): When an impact is detected by the G-sensor, the dash cam automatically saves the current footagе као догађај file, спречавајући његово преписивање.
• Parking Surveillance (24-hour Recording):
  • Детекција покрета: Records automatically when motion is detected around the vehicle while parked.
  • Impact Recording: Records when an impact is detected while parked.

  Note: Parking surveillance requires a continuous power supply, typically provided by the OBD-II cable.

Рад на додирној табли

The 3-inch touch panel allows for easy navigation and control:

• Tap icons to access menus, settings, and playback.
• Swipe to navigate through lists or video files.
• Adjust settings such as recording resolution, G-sensor sensitivity, and parking mode options.

Viewинг Рецордингс

• На уређају: Access the playback menu on the touch screen to view recorded videos directly.
• На рачунару: Remove the MicroSD card from the dash cam and insert it into a computer's card reader. Use the dedicated IROAD PC Viewer software (available for download from the IROAD webсајт) до view and manage recordings.

LED Signal Compatibility

The IROAD NX7 is designed to minimize flicker when recording LED traffic signals, ensuring clear capture of signal lights.

Одржавање

Управљање MicroSD картицама

• Редовно форматирање: It is recommended to format the MicroSD card regularly (e.g., once a month) to maintain optimal recording performance and prevent data corruption. This can usually be done through the dash cam's settings menu or via the PC Viewер софтвер.
• Животни век картице: MicroSD cards have a limited lifespan due to continuous writing cycles. Replace the card if you experience frequent recording errors or data loss.

Чишћење уређаја

• Use a soft, dry cloth to clean the dash cam's body and lenses.
• Не користите абразивна средства за чишћење или раствараче, јер могу оштетити уређај.
• Ensure the lenses are clean and free of smudges for clear video quality.

Решавање проблема

Спецификације

Гаранција и подршка

Specific warranty information for the IROAD NX7 Dash Cam is typically provided with the product packaging or can be found on the official IROAD website. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please refer to the contact information provided by your retailer or the IROAD official support channels.

Always ensure you are using official IROAD accessories and software for optimal performance and to maintain warranty validity.