SPODM-2P-RD nLight SwitchPod Control User Manual

1. Увод

1.1 Производ завршенview

The Sensor Switch SPODM-2P-RD nLight SwitchPod Control is a 2-button, low voltage (12/24-Vdc) wall-mount switch designed for nLight lighting control systems. This device provides manual ON/OFF control for connected lighting or other loads within an nLight network.

1.2 Кључне карактеристике

• nLight SwitchPod Switch
• Wall-Mount design
• 2-Button configuration (ON/OFF for two independent circuits or functions)
• Лов Волtage operation (12/24-Vdc)
• Црвена завршна обрада

1.3 Садржај пакета

• 1 x SPODM-2P-RD nLight SwitchPod Control
• Монтажни завртњи
• Упутство за инсталацију (ово упутство)

2. Безбедносне информације

Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in property damage, injury, or death.

• УПОЗОРЕЊЕ: Да бисте избегли пожар, струјни удар или смрт, искључите напајање на прекидачу или кутији са осигурачима и проверите да ли је напајање искључено пре ожичења.
• This device is designed for low voltage (12/24-Vdc) applications only. Do not connect to line voltage (120V/240V AC).
• Инсталацију треба да изврши квалификовани електричар у складу са свим локалним и националним електричним прописима.
• Не инсталирајте производ ако изгледа оштећено.
• Не модификујте уређај ни на који начин.

3. Подешавање и инсталација

3.1 Потребан алат

• Одвијач (Пхиллипс и/или равна глава)
• Скидачи жице
• Електрична трака (опционо)

3.2 Упутства за ожичење

The SPODM-2P-RD uses screw terminals for connection. Ensure all connections are secure.

Слика 3.2.1: Страна view of the SPODM-2P-RD with wiring label. This image shows the product's side profile, highlighting the label with detailed wiring instructions and specifications.

Слика 3.2.2: Позади view of the SPODM-2P-RD. This image illustrates the rear of the switch, revealing the screw terminals where low voltage wires are connected for power and control signals.

1. Искључите напајање: Before beginning any wiring, ensure power to the circuit is turned off at the circuit breaker. Verify with a voltagе тестер.
2. Идентификујте жице:
   • WHT (White): Manual ON Input
   • BLU (Blue) stripe: Right button output
   • BLK (Black) stripe: Left button output
   • RED (Red): Power (12/24-Vdc)
   • YLW (Yellow): Цоммон
3. Повежите жице: Connect the corresponding low voltage wires from your nLight system to the screw terminals on the SPODM-2P-RD. Ensure wires are stripped to the appropriate length and securely fastened under the screw terminals.
4. Прекидач за монтирање: Carefully push the wired switch into the wall box. Secure it using the provided mounting screws.
5. Инсталирајте зидну плочу: Attach the decorative wallplate (not included) over the switch.
6. Врати снагу: Поново укључите напајање на прекидачу.

4. Операција

4.1 Основна функционалност

The SPODM-2P-RD features two independent push-buttons, each controlling an ON/OFF function within the nLight system. The control method is touch-based, responding to physical presses of the buttons.

Слика 4.1.1: Предња страна view of the SPODM-2P-RD. This image displays the red faceplate with two sets of "ON" and "OFF" buttons, indicating its dual-channel control capability.

• Press the top "ON" button to activate the function associated with the upper control.
• Press the top "OFF" button to deactivate the function associated with the upper control.
• Press the bottom "ON" button to activate the function associated with the lower control.
• Press the bottom "OFF" button to deactivate the function associated with the lower control.

The specific actions triggered by these buttons are configured within the nLight system and may vary based on your installation.

5. Одржавање

The SPODM-2P-RD nLight SwitchPod Control requires minimal maintenance.

• Чишћење: To clean the surface of the switch, use a soft, damp крпа. Не користите абразивна средства за чишћење, раствараче или јаке хемикалије, јер могу оштетити завршну обраду или унутрашње компоненте.
• Нема делова које може да сервисира корисник: There are no user-serviceable parts inside this device. Do not attempt to open or repair the unit. Refer all servicing to qualified personnel.

КСНУМКС. Решавање проблема

If you experience issues with your SPODM-2P-RD, refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, contact Sensor Switch technical support or a qualified electrician.

7. Техничке спецификације

8. Гаранција и подршка

This product is covered by the manufacturer's standard warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Sensor Switch webсајту.

8.1 Техничка подршка

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Sensor Switch customer support. Contact information can typically be found on the manufacturer's webсајт или паковање производа.

Напомена: The input data does not provide specific contact details or warranty duration. Please refer to the manufacturer's official resources for the most accurate and up-to-date information.