HaiweiTech HHD-101 4K Video Audio Decoder User Manual

1. Увод

The HaiweiTech HHD-101 is a versatile H.265/H.264 4K Video Audio Decoder designed for various professional applications, including advertisement displays, video encoding, and IP camera decoding. It supports a wide range of IP protocols such as RTMP, RTSP, RTP, HTTP, HLS, and UDP, and offers both HDMI (up to 4K@30FPS) and CVBS/BNC outputs. This manual provides comprehensive instructions for the setup, operation, and maintenance of your HHD-101 decoder.

2. Безбедносне информације

• Ensure the device is powered by a 12V 2A power supply. Using an incorrect power supply may damage the unit.
• Не излажите уређај води, влази или екстремним температурама.
• Избегавајте постављање уређаја на директну сунчеву светлост или близу извора топлоте.
• Не покушавајте сами да отворите или поправите уређај. Све сервисирање препустите квалификованом особљу.
• Осигурајте одговарајућу вентилацију око уређаја како бисте спречили прегревање.
• Disconnect power before cleaning or moving the device.

3. Садржај пакета

Молимо вас да проверите садржај пакета приликом распакивања. Уколико неке ставке недостају или су оштећене, одмах контактирајте продавца.

• HaiweiTech HHD-101 Decoder Unit
• 12В адаптер за напајање
• Кориснички приручник (овај документ)

4. Производ је готовview

Familiarize yourself with the various ports and indicators on the HHD-101 decoder.

Слика 4.1: Предњи панел изнадview of HHD-101 Decoder.

Слика 4.2: Задњи панел изнадview of HHD-101 Decoder.

Figure 4.3: Detailed Port Diagram and Descriptions.

Описи лука:

1. LAN (Ethernet port): Used for network connection. Configuration of the IP gateway may be required for normal operation.
2. ЛЕД индикатори:
   • Red: Power ON
   • Green: Network activity
3. РСТ (Ресетовање): Press and hold the RST button until the green LED light turns off to reset the device.
4. AV OUT (CVBS out): Композитни видео излаз.
5. HDMI OUT (HDMI out): High-Definition Multimedia Interface output.
6. BNC OUT (BNC out): БНЦ конектор за видео излаз.
7. РС485: Serial communication port (GEN, IO-1, IO-2, 485A, 485B).
8. Напајање: 12V 2A DC power input.

5. Подешавање

Follow these steps to set up your HHD-101 decoder:

1. Прикључите напајање: Connect the provided 12V 2A power adapter to the "Power In" port (8) on the rear panel of the decoder. Plug the adapter into a power outlet. The red LED indicator should illuminate.
2. Мрежна конекција: Connect an Ethernet cable from your network router or switch to the "LAN" port (1) on the front panel. The green LED indicator should illuminate, indicating network activity.
3. Video Output Connection:
   • For HDMI output: Connect an HDMI cable from the "HDMI OUT" port (5) to your display device (e.g., TV, monitor).
   • For CVBS/BNC output: Connect a BNC cable from the "BNC OUT" port (6) or an AV cable from the "AV OUT" port (4) to your display device.
4. Audio Output (if applicable): If using AV OUT, audio will be carried through the composite cable. For HDMI, audio is embedded in the HDMI signal.
5. RS485 Connection (Optional): If required for control or data transmission, connect your RS485 devices to the RS485 terminal block (7).

Once all connections are made, the device is ready for configuration and operation.

6. Упутство за употребу

The HHD-101 decoder is designed to receive and decode various IP video streams. Operation typically involves configuring the decoder via its web interface to receive the desired stream.

6.1. Приступ Web Интерфејс

1. Ensure the decoder is connected to your network as described in the Setup section.
2. Find the IP address of the decoder. This can often be done using a network scanning tool or by checking your router's connected devices list. The default IP address is typically provided in the separate software utility or quick start guide.
3. Отвори а web претраживач на рачунару повезаном на исту мрежу.
4. Enter the decoder's IP address into the browser's address bar and press Enter.
5. Log in using the default username and password (refer to the quick start guide or contact support if unknown).

6.2. Configuring IP Stream Decoding

У оквиру web interface, you will find options to configure the input stream. The HHD-101 supports multiple protocols:

Figure 6.1: Supported IP Protocols for HHD-101 Decoder.

• Navigate to the "Input Settings" or "Stream Configuration" section.
• Select the desired protocol (e.g., RTMP, RTSP, HLS, UDP).
• Enter the source IP address or URL of the video stream you wish to decode.
• Configure any additional parameters such as port numbers, authentication credentials, or specific stream IDs as required by your source.
• Save the settings. The decoder should begin receiving and outputting the video stream to the connected display.

6.3. Мулти-View Декодирање

The HHD-101 supports decoding up to 4 channels for multi-view display. Consult the web interface documentation for specific instructions on configuring multi-view layouts and switching between sources.

6.4. Proprietary Protocol (P-P)

For ultra-low latency point-to-point transmission, the HHD-101 decoder can be used with Haiwei proprietary protocol encoders. This solution is available only when using both HaiweiTech encoders and decoders.

Figure 6.2: Typical System Diagram with HaiweiTech Encoder and Decoder.

7. Одржавање

• Чишћење: Користите меку, суву крпу за чишћење спољашњости уређаја. Не користите течна средства за чишћење или аеросоле.
• вентилација: Ensure the ventilation slots are clear of dust and obstructions to maintain proper airflow.
• Ажурирања фирмвера: Periodically check the HaiweiTech website or contact support for available firmware updates to ensure optimal performance and access to new features.
• Складиштење: Ако уређај складиштите дуже време, искључите га из струје и чувајте га на хладном и сувом месту.

КСНУМКС. Решавање проблема

9. Спецификације

10. Гаранција и подршка

For warranty information, please refer to the documentation provided at the time of purchase or visit the official HaiweiTech website. For technical support, additional manufacturing services (SDK/API, IP finder/Video management platform/IOS Android APP), solution analysis, or OEM services, please contact HaiweiTech directly. Contact details are typically available on the manufacturer's website or through your vendor.

Note: Haiwei proprietary protocol based ultra low latency point to point transmission solution is available with the decoder only. Additional manufacturing Services:SDK/API,IP finder/Video management platform/IOS Android APP,Solution analyze,OEM(more detail:hansen(at)hwsxtec(.)com)