SENSTREE DHTC-1011-1ZJ Temperature & Humidity Controller User Manual

1. Увод

The SENSTREE DHTC-1011-1ZJ is a dual-stage electronic temperature and humidity controller designed for precise environmental management. This device allows simultaneous control of both temperature and humidity, making it suitable for various applications such as reptile enclosures, greenhouses, home brewing, fermentation, and more. It features a plug-and-play design with dual LED screens for clear display of measured and set values, and three buttons for easy operation.

Слика 1.1: Предња страна view of the SENSTREE DHTC-1011-1ZJ Temperature & Humidity Controller.

2. Безбедносне информације

• Пажљиво прочитајте сва упутства пре употребе.
• Уверите се да је напајање волtage matches the controller's requirements (240 Volts).
• Do not immerse the controller unit or its power outlets in water. The probe is waterproof, but the main unit is not.
• Држите уређај ван домашаја деце.
• Do not disassemble or modify the device. Unauthorized modifications may lead to electric shock or malfunction.
• Always unplug the controller from the power outlet before cleaning or performing maintenance.
• Ensure connected appliances do not exceed the controller's maximum current rating.

3. Производ је готовview

The DHTC-1011-1ZJ controller features a clear LED display, intuitive buttons, and dedicated outlets for temperature and humidity control. The device includes a combined temperature and humidity sensor probe.

3.1 Компоненте

• Main Controller Unit with Dual LED Display
• Integrated Temperature and Humidity Sensor Probe (15cm cord)
• Кабл за напајање (120 цм)
• Two Controlled Outlets (one for Temperature, one for Humidity)

3.2 Екран и дугмад

The dual LED display shows the current measured temperature and humidity, along with the set points. The three buttons (SET, Up Arrow, Down Arrow) are used for navigation and parameter adjustment.

Слика 3.1: Крупни план view of the controller's display and control buttons.

Слика 3.2: Позади view showing the temperature and humidity control outlets.

4. Подешавање

1. Распакујте контролер: Carefully remove the controller and all components from the packaging.
2. Connect the Sensor Probe: Plug the temperature and humidity sensor probe into the designated port on the controller. Ensure it is securely connected.
3. Поставите сензор: Place the sensor probe in the environment where temperature and humidity need to be monitored and controlled. Avoid placing it directly in water unless specifically designed for submersible use (the probe itself is waterproof, but ensure connections are dry).
4. Укључите кућне апарате: Connect your heating/cooling device to the 'TEMPERATURE' outlet and your humidifying/dehumidifying device to the 'HUMIDITY' outlet.
5. Укључено: Plug the controller's power cord into a suitable 240V electrical outlet. The display will light up, showing current temperature and humidity readings.

5. Упутство за употребу

5.1 Подешавање параметара температуре

1. Притисните тастер СЕТ дугме једном. Приказ температуре ће трептати.
2. Користите Стрелица горе or Стрелица надоле buttons to adjust the desired temperature set point.
3. Притисните СЕТ again to confirm and move to the next parameter, or wait a few seconds for the setting to save automatically.

5.2 Setting Humidity Parameters

1. After setting the temperature, or by pressing СЕТ multiple times, navigate to the humidity setting. The humidity display will flash.
2. Користите Стрелица горе or Стрелица надоле buttons to adjust the desired humidity set point.
3. Притисните СЕТ again to confirm, or wait for automatic saving.

5.3 Advanced Settings (Calibration, Delay, Alarms)

To access advanced settings such as temperature calibration, compressor delay, and high/low alarms, refer to the detailed instructions provided in the full product manual or on the manufacturer's website. These settings are typically accessed by pressing and holding the СЕТ button for several seconds until the advanced menu appears.

• Калибрација температуре: Adjusts the temperature reading to match a known accurate thermometer.
• Кашњење компресора: Protects cooling equipment by preventing rapid cycling.
• High/Low Alarms: Set thresholds for temperature and humidity to trigger an alarm.
• Celsius/Fahrenheit Display: Switch between °C and °F as needed.

6. Одржавање

• Чишћење: Wipe the controller unit with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the unit is unplugged before cleaning.
• Sensor Probe Care: Keep the sensor probe clean and free from debris. If used in wet environments, periodically check for mineral buildup and gently clean with a damp тканина.
• Складиштење: Када се не користи, чувајте контролер на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура.

КСНУМКС. Решавање проблема

8. Спецификације

9. Гаранција и подршка

For warranty information, please refer to the documentation included with your purchase or visit the official SENSTREE website. Support contact details and further assistance can also be found on the manufacturer's webсајту.