SMARTRO SENSOR92

SMARTRO Wireless Remote Sensor User Manual

Model: SENSOR92

Увод

This manual provides detailed instructions for the setup, operation, and maintenance of your SMARTRO Wireless Remote Sensor (Model SENSOR92). This sensor is designed to work with compatible SMARTRO indoor/outdoor thermometers, specifically models SC91 and SC62, to provide accurate temperature and humidity readings.

Important Note: This sensor is not compatible with SMARTRO models SC92, SC93, or SC31B.

Производ је завршенview

Фронт view of the SMARTRO Wireless Remote Sensor

Слика 1: Фронт view of the SMARTRO Wireless Remote Sensor, showing the digital display for temperature and humidity, channel indicator, and signal icon.

Назад view of the SMARTRO Wireless Remote Sensor with battery compartment open

Слика 2: Позади view of the sensor with the battery cover removed, illustrating the battery compartment, °C/°F selection button, TX button, and 1 to 3 channel switch. Also visible is the wall-mounting hole.

The SMARTRO Wireless Remote Sensor (SENSOR92) is a compact, battery-powered device designed to transmit outdoor or indoor environmental data to a compatible main unit. It features a digital display showing current temperature (in °C or °F) and humidity (%RH). The sensor is equipped with a wall-mount hole and a table stand for versatile placement.

Подешавање и инсталација

  1. Инсталација батерије:

    • Отворите поклопац одељка за батерију на задњој страни сензора (погледајте слику 2).
    • Insert two (2) AA batteries, ensuring correct polarity (+ and -). Batteries are not included.
    • Добро затворите поклопац одељка за батерије.

  2. Избор канала:

    • Пронађите прекидач за канале од 1 до 3 унутар одељка за батерију (погледајте слику 2).
    • Select a channel (1, 2, or 3) for the sensor. If you are using multiple sensors, ensure each sensor is set to a different channel.

  3. Pairing with Main Unit:

    • Place the sensor within close proximity to your SMARTRO main unit (e.g., SC91 or SC62).
    • On the sensor, press the "TX" button (Transmit button) located inside the battery compartment (refer to Figure 2). This will send a signal to the main unit.
    • Follow the pairing instructions for your specific SMARTRO main unit to establish a connection. The main unit should display the sensor's readings.

  4. Пласман:

    • The sensor can be placed on a flat surface using its integrated stand or mounted on a wall using the wall-mount hole.
    • For outdoor use, choose a location that is protected from direct sunlight and heavy rain to ensure accuracy and longevity. The transmission range is up to 200ft/60m in an open area.
    SMARTRO Wireless Remote Sensor mounted on an outdoor wall, showing wireless signal transmission

    Слика 3: Example of outdoor sensor placement, demonstrating its wireless transmission capability to the main unit.

Упутство за употребу

  • Избор јединице температуре (°C/°F):

    • To switch between Celsius (°C) and Fahrenheit (°F), open the battery compartment cover.
    • Press the "°C/°F" selection button located inside the compartment (refer to Figure 2). The display will update accordingly.

  • Дисплеј за читање:

    • The sensor's digital display shows the current temperature and humidity readings.
    • These readings are also transmitted wirelessly to your paired SMARTRO main unit.

Одржавање

  • Замена батерије:

    • When the battery indicator on the sensor or main unit shows low power, replace both AA batteries promptly.
    • Ensure proper polarity during installation.

  • Чишћење:

    • Обришите спољашњост сензора меком крпомamp тканина. Не користите абразивна средства за чишћење нити урањајте уређај у воду.

  • Заштита животне средине:

    • Keep the sensor away from direct sunlight and heavy rain to prevent damage and ensure accurate readings.

Решавање проблема

ПроблемМогући узрокРешење
No readings on main unit / Sensor display blank.
  • Празне или празне батерије.
  • Нетачан поларитет батерије.
  • Сензор није упарен са главном јединицом.
  • Сензор је ван домета.
  • Интерференција.
  • Замените батерије новим АА батеријама.
  • Проверите оријентацију батерије.
  • Press the "TX" button on the sensor and re-pair with the main unit.
  • Померите сензор ближе главној јединици.
  • Relocate sensor away from electronic devices that may cause interference.
Нетачна очитавања температуре/влажности.
  • Сензор изложен директној сунчевој светлости или влази.
  • Sensor placed near heat sources or vents.
  • Sensor not calibrated (not user-adjustable).
  • Relocate sensor to a shaded, well-ventilated area, protected from rain.
  • Move sensor away from heat/cold sources.
  • If readings persist, contact customer support.
Main unit not receiving signal from sensor.
  • Sensor channel not matching main unit.
  • Obstructions between sensor and main unit.
  • Verify the channel switch setting on the sensor matches the selected channel on the main unit.
  • Minimize walls, large metal objects, or other obstructions between the sensor and main unit.

Спецификације

  • Модел: СЕНСОР92
  • Компатибилност: SMARTRO SC91, SC62 (Not compatible with SC92, SC93, SC31B)
  • Извор напајања: 2 к АА батерије (нису укључене)
  • Опсег преноса: До 60 метара (отворени простор)
  • Канали: 3 бирана канала
  • Приказ температуре: °C / °F selectable
  • Температурна толеранција: Најнижа: 5°Ф
  • Толеранција влаге: +/- 5% РХ
  • Материјал: Пластика
  • Димензије (приближно): 2.3 Inches (Length)
  • Тежина (приближно): 2.46 унци
  • Технологија повезивања: RF
  • Тип приказа: Дигитал
  • Брига о производу: Keep away from direct sunlight and rain.

Гаранција и подршка

SMARTRO products are designed for reliability and performance. For warranty information or technical support, please contact SMARTRO customer service. Details can often be found on the official SMARTRO webсајту или путем ваше платформе за куповину.

Произвођач: СМАРТРО

Емаил: суппорт@смартро.цо

Please have your model number (SENSOR92) and purchase details ready when contacting support.

© 2024 SMARTRO. Сва права задржана.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.