Scheppach HM216SPX Radial Miter Saw User Manual

1. Безбедносна упутства

Always read and understand all safety instructions before operating the Scheppach HM216SPX radial miter saw. Failure to follow these instructions can result in serious injury or death.

• Носите одговарајућу личну заштитну опрему (ЛЗО): Увек носите заштитне наочаре, заштиту за слух и маску за прашину.
• Одржавајте радни простор чистим и добро осветљеним: Претрпане или мрачне области изазивају несреће.
• Не радите у експлозивним атмосферама: Не користите електричне алате у присуству запаљивих течности, гасова или прашине.
• Осигурајте радни предмет: Увек клamp or otherwise secure the workpiece firmly before cutting.
• Maintain proper balance and footing: Не претерујте.
• Користите исправну оштрицу: Ensure the saw blade is sharp, clean, and suitable for the material being cut.
• Keep hands clear of the blade path: Never place hands near the rotating blade.
• Unplug before making adjustments or maintenance: Always disconnect the saw from the power source.

2. Производ је готовview

The Scheppach HM216SPX is a stable and lightweight radial miter saw designed for precise cutting of various materials, primarily wood. It features a powerful 2000W motor and a 210mm diameter saw blade, making it suitable for both longitudinal and angular cuts.

Слика 2.1: The Scheppach HM216SPX radial miter saw, showcasing its robust design and including two saw blades for versatile use.

Слика 2.2: Examples of applications for the HM216SPX, including cutting skirting boards, angular cuts, wooden beams, assembly wood, and laminate/parquet.

Слика 2.3: Key features of the saw: 2000W power, 230-240V~/50Hz power supply, integrated laser for precise cuts, and a compact design for easy handling and storage.

3. Подешавање

Before first use, ensure the saw is properly assembled and secured.

3.1 Распакивање и склапање

1. Пажљиво уклоните све компоненте из паковања.
2. Attach any loose components as per the assembly diagram (refer to the separate assembly guide if provided).
3. Уверите се да су сви завртњи и причвршћивачи чврсто затегнути.

3.2 Осигуравање тестере

For stable and safe operation, it is highly recommended to secure the miter saw to a workbench or a stable stand.

• Use appropriate bolts or clamps to fasten the saw through the designated mounting holes in its base.
• Ensure the workbench or stand is level and can support the weight and forces generated during operation.

3.3 Adjusting Extensions

Слика 3.1: The extendable rear support ensures stable seating, especially during angular cuts. Adjust it to provide optimal support for your workpiece.

Слика 3.2: Utilize the left and right extensions to support longer workpieces, ensuring stability and accuracy during cutting operations.

4. Упутство за употребу

Familiarize yourself with the saw's controls and functions before beginning any cutting tasks.

4.1 Укључивање/искључивање

• Connect the power cord to a suitable 230-240V~/50Hz power outlet.
• To start the saw, press the power switch. To stop, release the switch.

4.2 Adjusting Cutting Angles

Слика 4.1: The miter table can be oriented from 45° to -45° for various angular cuts. Loosen the locking knob, adjust to the desired angle, and re-tighten.

Слика 4.2: The saw head can be inclined to the left from 0° to 45° for bevel cuts. Adjust the inclination using the designated lever and secure it.

4.3 Коришћење ласерског водича

The integrated laser provides a visual guide for your cut line, enhancing precision.

• Activate the laser using its dedicated switch (if available).
• Align the laser line with your marked cut line on the workpiece.
• Напомена: The laser line indicates the cutting path, which has the width of the saw blade.

4.4 Прављење реза

Слика 4.3: A user demonstrating the operation of the miter saw, making a precise cut on a wooden board. Always ensure the workpiece is stable and hands are clear.

Слика 4.4: The double slide rails allow for precise cuts up to 340 mm in width. Utilize the full range of motion for wider materials.

• Position the workpiece against the fence and secure it.
• Lower the saw blade slowly into the workpiece, allowing the blade to reach full speed before engaging.
• Apply steady, even pressure throughout the cut.
• Once the cut is complete, allow the blade to stop rotating before raising the saw head.

5. Одржавање

Редовно одржавање осигурава дуготрајност и оптималне перформансе ваше угаоне тестере.

5.1 Чишћење

• After each use, disconnect the saw from power and clean off sawdust and debris using a brush or compressed air.
• Pay special attention to the blade guard, motor vents, and sliding mechanisms.
• Немојте користити раствараче или абразивна средства за чишћење.

5.2 Замена оштрице

• Always disconnect the saw from the power supply before changing the blade.
• Refer to the saw's specific instructions for accessing and removing the blade.
• Use only 210mm diameter blades with a 30mm bore, suitable for the saw's maximum RPM.
• Ensure the new blade is installed with the teeth pointing in the correct direction.

5.3 Подмазивање

• Periodically apply a light machine oil to the sliding mechanisms to ensure smooth operation.
• Avoid over-lubrication, which can attract dust.

КСНУМКС. Решавање проблема

Овај одељак се бави уобичајеним проблемима на које можете наићи са вашом угаоном тестером.

7. Спецификације

Technical data for the Scheppach HM216SPX Radial Miter Saw.

Слика 7.1: Visual representation of maximum cut dimensions and blade specifications. Max cut width: 340 mm, Max cut height: 65 mm. Blade size: 210 x 30 mm, with options for 24 or 48 teeth. Indicates robust construction.

8. Гаранција и подршка

The Scheppach HM216SPX Radial Miter Saw comes with a limited warranty. Please retain your proof of purchase for warranty claims.

8.1 Информације о гаранцији

• For details regarding the specific terms and conditions of your limited warranty, please refer to the warranty card included with your product or visit the official Scheppach webсајту.
• The warranty typically covers defects in materials and workmanship under normal use.

8.2 Корисничка подршка

• If you encounter any issues not covered in the troubleshooting section, or require technical assistance, please contact Scheppach customer support.
• Have your product model number (HM216SPX) and serial number (if applicable) ready when contacting support.