1. Увод
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the GIM KB-14 Pro Magnetic RGB Light Strip. Please read this manual thoroughly before using the product to ensure proper functionality and safety.
2. Безбедносне информације
- Уверите се да је напајање искључено пре инсталације или одржавања.
- This product is designed for indoor use within a PC case. Do not expose to moisture or extreme temperatures.
- Use only with compatible 5V ARGB 3-pin headers. Connecting to a 12V RGB header will damage the product.
- Чувати ван домашаја деце.
- Do not attempt to disassemble or modify the light strip.
3. Садржај пакета
Проверите да ли су све ставке присутне у пакету:
- GIM KB-14 Pro Magnetic RGB Light Strip (35cm)
- Mini Controller with SATA Power Header
- 3-pin ARGB Connection Cable
- 4-pin to 6-pin Fan Port Cable (for GIM Hub connection)
4. Спецификације
| Феатуре | Детаљ |
|---|---|
| Број модела | КБ-КСНУМКС |
| Димензије (ДкШкВ) | 13.7 к 0.7 к 0.7 инча (35 к 1.8 цм к 1.8 цм) |
| Материјал | Алуминијум |
| Тип извора светлости | LED (Addressable RGB) |
| Волtage | 5 Волтс |
| Тип монтаже | Магнетиц Моунт |
| Боја | Мултицолор |
5. Подешавање и инсталација
The GIM KB-14 Pro light strip features magnetic adsorption for easy installation within your PC case. Ensure your PC is powered off and unplugged before beginning installation.
5.1 Магнетна инсталација
Position the light strip inside your PC case. The magnets on both sides of the strip will adhere to any ferrous metal surface, allowing for flexible placement. Common placements include along the top, bottom, or side panels of the case.
5.2 Методе повезивања
The GIM KB-14 Pro offers three primary ways to connect and power the light strip:
- Connect to Lighting Controller: Connect the 3-pin cable from the light strip to the included mini lighting controller. Then, connect the lighting controller's SATA header to a SATA power connector from your Power Supply Unit (PSU).
- Повежите се на ГИМ Хуб: Connect the 4-pin cable from the light strip to a 6-pin fan port (2-5Pin) on a compatible GIM Hub (sold separately).
- Повежите се на матичну плочу: If your motherboard has a 5V ARGB 3-pin header, connect the 3-pin cable from the light strip directly to this header. Ensure it is a 5V ARGB header and not a 12V RGB header.
6. Упутство за употребу
Once installed and connected, you can adjust the lighting effects of your GIM KB-14 Pro light strip using one of the following methods, depending on your connection choice:
6.1 Adjusting Color and Speed
- Using the Lighting Controller: If connected to the mini lighting controller, use the buttons on the controller:
- Press "M" to cycle through different lighting modes.
- Press "S" to adjust the light speed of the current mode.
- Press "C" to adjust colors within certain modes.
- Using a GIM Hub: If connected to a GIM Hub, use the fan controller provided with the GIM Hub to adjust the light strip's speed and color. Refer to your GIM Hub's manual for specific instructions.
- Using Motherboard Software: If connected directly to a 5V ARGB 3-pin header on your motherboard, you can adjust the color and speed through your computer's motherboard RGB software (e.g., Asus Aura Sync, Asrock RGB Led, Gigabyte RGB Fusion, MSI Mystic Light).
The light strip supports Addressable RGB (ARGB) SYNC, providing a wide range of color combinations and dynamic lighting effects compatible with major motherboard RGB ecosystems.
7. Одржавање
The GIM KB-14 Pro Magnetic RGB Light Strip requires minimal maintenance.
- Чишћење: To clean the light strip, ensure your PC is powered off and unplugged. Gently wipe the surface with a soft, dry, or slightly damp тканина. Немојте користити јаке хемикалије или абразивне материјале.
- инспекција: Периодично проверавајте везе како бисте били сигурни да су безбедне.
КСНУМКС. Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Light strip does not light up. | No power, incorrect connection, or faulty component. | Check all power connections (SATA, GIM Hub, or motherboard header). Ensure the 3-pin ARGB connector is fully seated. Verify the power supply is on. |
| Боје су погрешне или трепере. | Incorrect ARGB header connection or software conflict. | Ensure the light strip is connected to a 5V ARGB 3-pin header, not a 12V RGB header. If using motherboard software, ensure it is up-to-date and properly configured. Try restarting the PC. |
| Light strip not responding to controller/software. | Loose connection or software issue. | Verify the connection to the controller, GIM Hub, or motherboard. If using software, close and reopen the application, or reinstall it if necessary. |
9. Информације о гаранцији
The GIM KB-14 Pro Magnetic RGB Light Strip comes with a 12-месечна гаранција from the date of purchase. This warranty covers manufacturing defects and issues arising from normal use. It does not cover damage caused by misuse, unauthorized modification, or improper installation.
10. Корисничка подршка
For further assistance, technical support, or warranty claims, please contact GIM customer support. We offer 7*24 hours customer support to address any questions or concerns you may have.
Please visit the official GIM website or refer to your purchase documentation for specific contact details.