ABB AD1NO-R-15m Modular Device Switch User Manual

1. Увод

The ABB AD1NO-R-15m is an analog time switch designed for daily scheduling with a 15-minute switching interval. This modular device features one normally open (NO) channel and includes a power reserve function to maintain timekeeping during power outages. It is suitable for various electrical scheduling applications.

Слика 1: Предња страна view of the ABB AD1NO-R-15m Modular Device Switch, highlighting its compact design and control interface.

2. Важна безбедносна упутства

Please read and understand all safety instructions before installing, operating, or maintaining this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Инсталацију и одржавање морају обављати само квалификовано особље.
• Disconnect power before installation, maintenance, or servicing to prevent electric shock.
• Ensure all wiring complies with local and national electrical codes and regulations.
• Не користите уређај ако изгледа оштећено.
• This device is designed for indoor use in dry environments.

3. Производ је готовview

The AD1NO-R-15m is an analog time switch with the following key features:

• Аналогно бирање: For setting daily schedules.
• 15-Minute Switching: Allows precise control over connected circuits with 15-minute intervals.
• 1 Normally Open (NO) Channel: Controls one electrical circuit.
• Резерва снаге: Maintains timekeeping for a specified duration during power interruptions.
• Модуларни дизајн: Suitable for integration into standard electrical panels on a DIN rail.

Note: The power reserve ensures the timer continues to function accurately even if the main power supply is temporarily lost.

4. Подешавање и инсталација

Follow these steps for proper installation of the AD1NO-R-15m Modular Device Switch:

1. Искључивање струје: Before beginning, ensure the main power supply to the installation area is completely disconnected at the circuit breaker or fuse box. Verify with a voltagе тестер.
2. Монтажа: Mount the AD1NO-R-15m switch onto a standard DIN rail within an appropriate electrical enclosure. Ensure it is securely fastened.
3. Ожичење:
   • Connect the incoming phase (L) and neutral (N) wires to the designated input terminals of the time switch.
   • Connect the load wire from the output terminal of the time switch to the device you wish to control.
   • Ensure all connections are tight and secure. Refer to the wiring diagram printed on the device for specific terminal identification.
4. Обнова напајања: Once all connections are verified and secure, close the electrical enclosure and restore power to the circuit.

Always consult a qualified electrician for installation if you are unsure or lack experience with electrical wiring.

5. Упутство за употребу

To set the time and program the switching schedule:

1. Подесите тренутно време: Rotate the analog dial clockwise until the current time aligns precisely with the reference arrow or marker on the device's face.
2. Program Switching Times: The dial features small segments around its perimeter. Push in the segments corresponding to the times you want the connected circuit to be ON. Pull out segments for OFF periods. Each segment typically represents a 15-minute interval.
3. Operating Mode (if applicable): If your model includes a manual override switch (e.g., ON, AUTO, OFF), ensure it is set to "AUTO" for programmed operation.

The internal power reserve will automatically charge when the device is powered, ensuring continued accurate timekeeping during short power outagес.

6. Одржавање

The AD1NO-R-15m is designed for minimal maintenance. Follow these guidelines to ensure optimal performance:

• Чишћење: Keep the device clean and free from dust. Use a dry, soft cloth for cleaning. Do not use liquid cleaners, abrasive materials, or solvents.
• инспекција: Periodically inspect the wiring connections for tightness and any signs of wear, corrosion, or damage. Ensure all terminals are secure.
• Услови животне средине: Уверите се да радно окружење остаје у наведеним опсезима температуре и влажности како бисте спречили оштећења.

There are no user-serviceable parts inside this device. Do not attempt to open the casing, as this will void the warranty and may expose you to electrical hazards.

КСНУМКС. Решавање проблема

If you encounter issues with your AD1NO-R-15m switch, refer to the table below for common problems and solutions:

If the problem persists after attempting these solutions, please contact ABB customer support for further assistance.

8. Техничке спецификације

• Модел: AD1NO-R-15m
• Број дела: 2CSM222461R1000
• Произвођач: АББ
• Тип: Аналогни временски прекидач
• Switching Interval: КСНУМКС минута
• Канали: 1 нормално отворен (НЕ)
• Резерва снаге: Да
• Тежина артикла: Отприлике 2.82 унци (80 грама)
• Димензије производа: Приближно 3.54 к 0.69 к 2.6 инча (90 к 17.5 к 66 мм)
• Тип монтаже: DIN Rail (Wall Mount)
• Укључене компоненте: Modular device switch
• Потребне батерије: No (features internal power reserve)
• ASIN: B09BP4PFMF
• Прво доступно: 21. децембра 2024. године

Напомена: Спецификације су подложне променама без претходне најаве.

9. Гаранција и подршка

Информације о гаранцији

For detailed warranty terms and conditions, please refer to the official ABB warranty statement provided with your purchase or visit the official ABB webсајт. Сачувајте доказ о куповини за потребе гаранције.

Корисничка подршка

For technical assistance, troubleshooting, or service inquiries, please contact ABB customer support through their official webсајт или контакт информације које су наведене у паковању вашег производа.

Званичник АББ-а Webсајт: ввв.абб.цом