Crosley C6B-DB Belt-Drive Bluetooth Turntable Record Player User Manual

1. Увод

This manual provides instructions for the setup, operation, and maintenance of your Crosley C6B-DB Belt-Drive Bluetooth Turntable. The C6B-DB is a fully manual two-speed turntable designed to deliver an authentic analog listening experience. It features a durable MDF plinth, a heavy steel platter, and a low-vibration synchronous motor. The adjustable tonearm with a pre-installed moving magnet cartridge allows for precise tracking. Connectivity options include RCA outputs for wired speakers and built-in Bluetooth for wireless streaming to external speakers. Please read this manual thoroughly before using your turntable.

2. Безбедносне информације

Please observe the following safety precautions to prevent damage to the unit and ensure safe operation:

• Не излажите јединицу киши или влази.
• Не излажите уређај директној сунчевој светлости, изворима топлоте или екстремним температурама.
• Осигурајте одговарајућу вентилацију око јединице.
• Користите само струјни адаптер који је испоручен са јединицом.
• Не покушавајте да растављате или модификујете уређај. Сва сервисирања препустите квалификованом особљу.
• Држите уређај даље од јаких магнетних поља.
• Handle the stylus with care to avoid damage and injury.

3. Шта је у кутији

Проверите да ли су све ставке наведене у наставку укључене у ваш пакет:

• Crosley C6B-DB Turntable Unit
• Адаптер за напајање
• Упутство за употребу
• Дуст Цовер
• Платтер
• Погонски ремен
• Фелт Мат
• Противтежа
• Анти-скате Веигхт

4. Производ је готовview

Familiarize yourself with the components of your Crosley C6B-DB turntable.

Слика 1: Crosley C6B-DB Turntable with its clear dust cover in place. This image shows the overall design of the turntable, including the plinth, platter, tonearm, and the protective dust cover.

4.1 Врх View Компоненте

• Поклопац за прашину: Штити грамофон од прашине када се не користи.
• тањир: The surface on which records are placed. Made of heavy steel for stability.
• Филцана простирка: Provides a soft surface for records and helps reduce static.
• вретено: Holds the record in place on the platter.
• Тонеарм: Holds the cartridge and stylus, guiding it across the record grooves.
• кертриџ: Converts groove vibrations into electrical signals. The C6B-DB comes with a pre-installed moving magnet cartridge.
• Оловка (игла): The tip of the cartridge that reads the record grooves.
• Противтежа: Adjusts the tracking force of the tonearm.
• Anti-skate Dial: Compensates for the inward force on the tonearm, ensuring even tracking.
• Полуга за означавање: Raises and lowers the tonearm gently.
• Бирач брзине: Switch between 33 1/3 RPM and 45 RPM.

Слика 2: Одозго надоле view of the turntable, highlighting the platter, felt mat, spindle, and the tonearm assembly. The speed selector switch is visible on the left side of the plinth.

Слика 3: A detailed close-up of the pre-installed moving magnet cartridge and stylus on the tonearm. This component is crucial for converting the physical grooves of a record into an audio signal.

4.2 Прикључци задње плоче

• Уземљени терминал: For connecting a ground wire from an amplifier/receiver to reduce hum.
• RCA излаз (Л/Д): Повезује се на ан ampлифиер или активни звучници.
• Пхоно/Лине Свитцх: Selects between the built-in preamplifier (Line) or an external phono preamplifier (Phono).
• ДЦ ИН 12В: Power input for the supplied adapter.
• Блуетоотх индикатор: LED light indicating Bluetooth pairing status.
• Прекидач: Укључује или искључује грамофон.

Слика 4: The rear panel of the turntable, showing the ground terminal, RCA L/R outputs, Phono/Line switch, DC 12V power input, Bluetooth indicator, and the main power switch.

5. Подешавање

Follow these steps to set up your turntable for first use.

5.1 Распакивање и постављање

1. Пажљиво уклоните све компоненте из паковања.
2. Place the turntable on a stable, level surface away from direct sunlight, heat, and vibrations.
3. Ensure there is enough space around the turntable for proper ventilation and operation.

5.2 Инсталација плоче и каиша

1. Place the platter onto the turntable spindle.
2. Locate the drive belt. Gently stretch the belt around the inner rim of the platter and then around the motor pulley. Ensure the belt is not twisted.
3. Поставите простирку од филца на врх тањира.

5.3 Tonearm Balance and Tracking Force Adjustment

Proper tonearm adjustment is crucial for optimal sound quality and to prevent damage to your records and stylus.

1. Уклоните заштитник игле.
2. Place the counterweight onto the rear of the tonearm. Rotate it clockwise until it is approximately halfway on.
3. With the cueing lever in the down position, carefully balance the tonearm by rotating the counterweight until the tonearm floats horizontally. Do not let the stylus touch the platter or record.
4. Once balanced, hold the counterweight steady and rotate the numbered ring on the front of the counterweight until "0" aligns with the line on the tonearm.
5. Rotate the entire counterweight (both parts) counter-clockwise to the recommended tracking force. For the pre-installed cartridge, a tracking force of 2.0 grams is typically recommended. Refer to your cartridge manufacturer's specifications for precise values.

5.4 Anti-skate Adjustment

The anti-skate mechanism prevents the tonearm from being pulled inward excessively.

1. Attach the small loop of the anti-skate weight's thread to the anti-skate post on the tonearm.
2. Pass the thread through the wire support.
3. Set the anti-skate dial to the same value as your tracking force (e.g., 2.0 for 2.0 grams tracking force).

5.5 Аудио веза

Connect your turntable to an audio system.

• Using Built-in Preamplifier (Line Out): Connect the RCA cables from the turntable's RCA outputs to a Line-level input (AUX, CD, Tuner) on your amplifier or powered speakers. Set the Phono/Line switch on the turntable's rear panel to "Line".
• Using External Preamplifier (Phono Out): Ако ваш amplifier has a dedicated Phono input, connect the RCA cables from the turntable's RCA outputs to the Phono input on your amplifier. Set the Phono/Line switch on the turntable's rear panel to "Phono". Connect the ground wire from the turntable to the ground terminal on your ampлифиер.

5.6 Прикључак за напајање

Connect the power adapter to the DC IN 12V port on the turntable and then plug it into a wall outlet.

6. Операција

Instructions for playing records and using Bluetooth connectivity.

6.1 Пуштање плоче

1. Ensure the turntable is powered on using the switch on the rear panel.
2. Select the correct speed (33 1/3 or 45 RPM) using the speed selector switch on the plinth.
3. Place a record on the felt mat.
4. Подигните ручицу грамофона помоћу полуге за подешавање звука.
5. Manually position the tonearm over the desired starting groove of the record.
6. Gently lower the tonearm using the cueing lever. The stylus will begin playing the record.
7. To stop playback, lift the tonearm using the cueing lever and return it to the tonearm rest.

6.2 Bluetooth Out Function

The C6B-DB can stream audio wirelessly to external Bluetooth speakers.

1. Ensure your external Bluetooth speaker is in pairing mode.
2. Turn on the turntable. The Bluetooth indicator light on the rear panel will flash, indicating it is searching for a device.
3. Once connected, the Bluetooth indicator light will turn solid blue.
4. You can now play records, and the audio will stream to your paired Bluetooth speaker.
5. To disconnect, turn off the Bluetooth speaker or the turntable.

7. Одржавање

Regular maintenance helps prolong the life of your turntable and records.

7.1 Чишћење грамофона

• Wipe the dust cover and plinth with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• For the stylus, use a soft brush designed for stylus cleaning, brushing gently from back to front.

7.2 Замена оловке

The stylus is a consumable part and should be replaced after approximately 300-500 hours of playback, or if you notice a degradation in sound quality. The C6B-DB is compatible with NP5 replacement needles.

1. Gently pull the old stylus assembly downwards and forwards to remove it from the cartridge.
2. Align the new stylus assembly with the cartridge body and push it upwards until it clicks into place.

КСНУМКС. Решавање проблема

If you experience issues with your turntable, refer to the following common problems and solutions.

9. Спецификације

10. Гаранција и подршка

Crosley products are manufactured to high-quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Crosley website. If you encounter any issues or require technical assistance, please contact Crosley customer support.

Crosley Support: ввв.црослеирадио.цом/суппорт