Teradek Spark 4K Receiver Instruction Manual

1. Увод

The Teradek Spark 4K Receiver is designed for high-quality, ultra-low latency wireless video reception. This device supports up to 4Kp30 resolution, ensuring clear and precise video for professional monitoring and broadcasting applications. With a reliable wireless range and robust security features, the Spark 4K Receiver integrates seamlessly with Spark 4K transmitters to provide an efficient wireless video solution.

2. Карактеристике производа

• Unmatched Resolution: Supports up to 4Kp30 for crystal-clear video.
• Ултра-ниско кашњење: Experience near-instantaneous video transmission with less than 0.001 second delay.
• Reliable Wireless Range: Transmit video up to 500 feet line of sight.
• Сигурна бежична веза: Features AES-128 encryption and RSA-1024 key exchange.
• Разноврсна компатибилност: Seamlessly integrates with Spark 4K transmitters.

Figure 2.1: Teradek Spark 4K units showcasing core features.

Figure 2.2: Visual representation of key performance features.

3. Шта је у кутији

Your Teradek Spark 4K Receiver package should contain the following items:

• Teradek Spark 4K Receiver Unit
• Адаптер за напајање (6-18V једносмерна веза)
• УСБ-Ц кабл
• ХДМИ кабл
• Водич за брзи почетак (ово упутство)

4. Девице Оверview

4.1. Physical Dimensions and Weight

Figure 4.1: Dimensions and weight of the Spark 4K Receiver.

4.2. Портови и контроле

Familiarize yourself with the ports and controls on your Spark 4K Receiver:

Figure 4.2: Rear panel of the Spark 4K Receiver with port labels.

• ХДМИ излаз: Connects to your display or monitor.
• 6-18V DC: Primary power input.
• Тип-Ц: USB-C port for power or data.
• Resync Button: Used to re-establish connection with the transmitter.
• Прекидач за укључивање/искључивање: Укључује/искључује напајање уређаја.

4.3. Монтажне тачке

Figure 4.3: Bottom of the Spark 4K Receiver with mounting options.

The receiver features multiple mounting points for flexible integration into your setup:

• Two M3 mounting points
• One 1/4-20 mounting point

5. Упутства за подешавање

Follow these steps to set up your Teradek Spark 4K Receiver:

1. Прикључак за напајање: Connect the provided power adapter to the 6-18V DC input on the receiver. Alternatively, you can use a USB-C power source.
2. Повезивање екрана: Connect an HDMI cable from the HDMI Out port on the receiver to the HDMI input of your monitor or display device.
3. Укључено: Flip the Power On/Off switch to the 'On' position. The OLED screen on the receiver will illuminate.
4. Pairing with Transmitter: Ensure your Spark 4K Transmitter (sold separately) is powered on and transmitting. The receiver will automatically attempt to link with the nearest compatible transmitter. If a connection is not established, press the Resync button on both the transmitter and receiver.
5. Потврдите везу: Once connected, the OLED screen on the receiver will display "RECEIVING VIDEO" and indicate the link status (e.g., "Link: Good").

Figure 5.1: Typical setup diagram for the Spark 4K wireless video system.

6. Упутство за употребу

Once the receiver is set up and linked with a transmitter, it will continuously receive the video signal. The OLED screen provides real-time status information.

6.1. Monitoring Status

The OLED display on the front of the receiver shows critical information:

• Ниво батерије: Indicates remaining power if operating on battery (via USB-C power bank).
• Video Resolution/Framerate: Displays the incoming video format (e.g., 4K30, 1080p50).
• учесталост: Shows the current operating frequency (e.g., 5670 MHz).
• Статус везе: Confirms if a stable connection is established (e.g., "Link: Good", "No Link").

Figure 6.1: Receiver OLED screen showing active video reception status.

6.2. Using the Teradek Launchpad App

The Teradek Launchpad app (available for iOS, iPadOS, Android, and OSX) allows for advanced control and monitoring of your Spark 4K system. Connect your mobile device or computer to the Spark 4K's Wi-Fi network to access features such as:

• Detailed signal strength and quality metrics.
• Channel selection and frequency management.
• System configuration and firmware updates.

Figure 6.2: Teradek Launchpad app compatibility and control features.

7. Одржавање

Proper maintenance ensures the longevity and optimal performance of your Spark 4K Receiver.

• Чишћење: Користите меку, суву крпу за чишћење спољашњости уређаја. Избегавајте употребу течних средстава за чишћење или растварача.
• Складиштење: Када се не користи, чувајте пријемник на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура.
• Ажурирања фирмвера: Regularly check for firmware updates via the Teradek Launchpad app or the official Teradek website to ensure you have the latest features and performance enhancements.
• Управљање кабловима: Ensure all cables are securely connected and not under undue strain to prevent damage to ports.

КСНУМКС. Решавање проблема

If you encounter issues with your Spark 4K Receiver, refer to the following common problems and solutions:

9. Спецификације

10. Гаранција и подршка

Teradek products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official Teradek website. For technical support, troubleshooting assistance, or to download the latest firmware and software, please visit the Teradek support portal or contact their customer service.

• Подршка на мрежи: www.teradek.com/support
• Регистрацију производа: Register your product online to receive updates and streamline support.