Areyourshop 360W RGBW 4-in-1 LED Zoom Moving Head Wash Stagе Упутство за употребу светла

1. Увод

This manual provides detailed instructions for the safe and effective operation of your Areyourshop 360W RGBW 4-in-1 LED Zoom Moving Head Wash Stage Light. Please read this manual thoroughly before installation and use to ensure proper function and to prevent damage to the unit or injury to personnel. Keep this manual for future reference.

2. Безбедносне информације

• Увек прикључите уређај на уземљену утичницу.
• Уверите се да волtagе одговара наведеном волtagе за јединицу.
• Не користите уређај ако је кабл за напајање оштећен.
• Избегавајте директно излагање очију извору светлости.
• Обезбедите одговарајућу вентилацију око уређаја како бисте спречили прегревање.
• Mount the unit securely using appropriate hardware and safety cables.
• Не отварајте кућиште; унутра нема делова које корисник може сам да поправи. Сво сервисирање препустите квалификованом особљу.

3. Садржај пакета

Проверите да ли су све ставке присутне и у добром стању након отварања пакета:

• 1 x Areyourshop 360W RGBW 4-in-1 LED Zoom Moving Head Wash Stagе Светлост
• КСНУМКС к кабл за напајање
• 1 к носач за монтажу
• 1 x English Instruction Manual (this document)

Image 3.1: The moving head light unit, power cord, and mounting bracket.

4. Производ је готовview

The Areyourshop 360W Moving Head Light features 36 x 10W RGBW 4-in-1 LEDs, offering a wide range of color mixing and wash effects. It includes zoom functionality and multiple control modes for versatile stagе апликације за осветљење.

Слика 4.1: Предња страна view of the moving head light with dimensions: approximately 38cm (15 inches) tall and 20cm (8.2 inches) wide at the base.

Image 4.2: The moving head light showcasing its ability to produce various color wash effects, including white, red, green, blue, and purple.

5. Спецификације

6. Подешавање

6.1 Монтажа

1. Identify a suitable mounting location that can safely support the weight of the fixture.
2. Attach the provided mounting bracket to the fixture using the designated screws.
3. Securely fasten the fixture to a truss or other stable structure using appropriate clamps (not included) and the mounting bracket.
4. Always use a safety cable (not included) as a secondary attachment to prevent the fixture from falling in case of primary mounting failure.

6.2 Прикључак за напајање

Connect the provided power cord to the power input on the rear of the fixture and then to a grounded power outlet. Ensure the power supply is stable and within the specified voltagе ранге.

6.3 DMX веза (опционо)

For DMX control, connect a DMX cable from your DMX controller's output to the DMX IN port on the fixture. If linking multiple fixtures, connect the DMX OUT of the first fixture to the DMX IN of the next, and so on. Terminate the last fixture in the chain with a DMX terminator.

7. Радни режими

The fixture can be operated in several modes, selectable via the LCD display and control buttons on the base of the unit.

7.1 DMX512 Mode

This mode allows for professional control over all functions using a DMX controller. Set the DMX address for each fixture using the LCD display. Refer to the DMX channel chart (typically provided in a separate DMX manual or appendix) for specific channel assignments and functions.

7.2 Аутоматски режим

In Auto mode, the fixture runs through pre-programmed light shows automatically. Use the control buttons to select different auto programs or adjust speed settings.

7.3 Режим активирања звука

The fixture's built-in microphone detects sound and synchronizes light patterns to the beat of the music. Sensitivity can often be adjusted via the menu.

7.4 Режим главног и робног уређаја

Link multiple fixtures together without a DMX controller. Set one fixture as the 'Master' and the others as 'Slave'. The slave units will mimic the master's movements and effects. Connect DMX OUT of the master to DMX IN of the first slave, and continue the chain.

8. Одржавање

8.1 Чишћење

Regularly clean the lens and exterior housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the unit is powered off and disconnected before cleaning.

8.2 Одржавање вентилатора

The unit is equipped with an automatic cooling fan. Periodically check the fan vents for dust accumulation and clean as necessary to ensure efficient heat dissipation and prolong the lifespan of the LEDs.

КСНУМКС. Решавање проблема

• Нема напајања: Check power cord connection, wall outlet, and ensure the power switch is on.
• Нема излаза светлости: Verify power, check selected operating mode, and ensure no DMX signal issues if in DMX mode.
• Erratic Behavior: If using DMX, check DMX cable connections, DMX address settings, and ensure the last fixture has a terminator. Try resetting the unit by power cycling.
• прегревање: Ensure adequate ventilation around the unit. Clean fan vents if obstructed by dust.

10. Гаранција и подршка

For warranty information or technical support, please contact Areyourshop customer service through your purchase platform or the official Areyourshop webсајт. Сачувајте рачун као доказ о куповини.