Yottamaster DR2RU3-25 Dual Bay 2.5" RAID Enclosure User Manual

1. Увод

Thank you for choosing the Yottamaster DR2RU3-25 Dual Bay 2.5" RAID Enclosure. This manual provides essential information for the proper installation, configuration, and operation of your device. Please read it thoroughly before use to ensure optimal performance and data integrity.

2. Садржај пакета

Молимо вас да проверите да ли су све ставке присутне у вашем пакету:

• Yottamaster DR2RU3-25 Dual Bay 2.5" RAID Enclosure
• USB 3.0 Type-A to Type-B Data Cable
• 5В 2А адаптер за напајање
• Шрафцигер
• Set of Screws for drive installation
• Кориснички приручник (овај документ)

3. Карактеристике производа

• Дизајн са два одељка: Supports two 2.5-inch SATA I/II/III HDDs or SSDs.
• Велики капацитет: Accommodates drives with thicknesses of 7mm, 9mm, and 12.5mm, supporting up to 8TB total storage.
• USB 3.0 повезивање: Offers data transfer speeds up to 5Gbps with UASP protocol support.
• RAID режими: Supports RAID 0, RAID 1, SPAN (JBOD), and PM (Individual) modes for flexible data management.
• Ефикасно одвођење топлоте: Constructed with an all-aluminum alloy chassis and cooling holes for optimal thermal performance.
• Екстерно напајање: Includes a 5V 2A power adapter for stable operation.
• Функција аутоматског спавања: Automatically enters sleep mode after 10 minutes of inactivity to conserve energy and extend drive lifespan.
• Широка компатибилност: Compatible with Windows, Linux, and macOS operating systems.
• Компактан дизајн: Dimensions of 166mm (L) x 111mm (H) x 48mm (W).

Figure 3.1: USB 3.0 5Gbps Transfer Speed and OS Compatibility

Figure 3.2: Dual Bay Design and Drive Compatibility (7mm, 9mm, 12.5mm)

For more information on the Western Digital drive shown, visit: http://qr.wdc.com/wdred

Figure 3.3: Enclosure Design with Cooling and Ports

Figure 3.4: Auto-Sleep Function

4. Упутства за подешавање

4.1. Installing Hard Drives/SSDs

1. Gently slide open the front panel of the enclosure to access the drive bays.


Figure 4.1: Opening the Enclosure

2. Mount your 2.5-inch SATA HDD or SSD onto the provided drive tray using the included screws and screwdriver. Ensure the drive is securely fastened.


Figure 4.2: Mounting Drive to Tray

3. Slide the drive tray with the installed drive into an available bay within the enclosure until it clicks into place. Repeat for the second drive if applicable.

Figure 4.3: Inserting Drive Tray into Enclosure
4. Close the front panel of the enclosure.

4.2. Setting RAID Mode

The Yottamaster DR2RU3-25 supports multiple RAID modes configured via DIP switches on the rear of the enclosure. Always ensure the enclosure is powered off before changing RAID mode settings.

1. Locate the DIP switches on the rear panel of the enclosure.
2. Refer to the diagram below to set the desired RAID mode.
3. After setting the DIP switches, power on the enclosure.
4. Важно: After changing the RAID mode, you must initialize and format the drives on your computer. This process will erase all existing data on the drives. Back up any important data before proceeding.

Figure 4.4: RAID Mode DIP Switch Settings

5. Упутство за употребу

5.1. Повезивање са рачунаром

1. Connect the USB 3.0 Type-B end of the data cable to the corresponding port on the rear of the enclosure.
2. Connect the USB 3.0 Type-A end of the data cable to an available USB port on your computer.
3. Connect the 5V 2A power adapter to the DC input port on the enclosure, then plug the adapter into a power outlet.


Figure 5.1: Connecting Power and Data Cables

4. Press the power button on the enclosure to turn it on. The LED indicator will illuminate.
5. Your computer should detect the new hardware. For new drives or after changing RAID modes, you may need to initialize and format the drives through your operating system's Disk Management utility (Windows) or Disk Utility (macOS).

5.2. Функција аутоматског спавања

The enclosure features an auto-sleep function. If there is no data exchange or activity for approximately 10 minutes, the hard drives will enter sleep mode. This helps to save power and prolong the lifespan of your drives. The drives will automatically wake up when data access is requested.

6. RAID Mode Configuration Details

Understanding the different RAID modes is crucial for optimal data management. Remember to power off the enclosure before adjusting DIP switches and re-initialize/format drives after any change.

Figure 6.1: RAID Mode Comparison

• PM (Individual Mode): Each installed drive is recognized as a separate, independent volume by the operating system. This mode offers no data redundancy or performance enhancement.
• RAID 0 (Стрипинг): Data is split into blocks and written across both drives. This mode offers the highest read/write speeds and combines the capacity of both drives. Warning: If one drive fails, all data on both drives will be lost.
• РАИД 1 (пресликавање): Data is simultaneously written to both drives, creating an exact copy. This mode provides excellent data redundancy; if one drive fails, your data is still accessible on the other. The total usable capacity is limited to that of the smaller drive.
• SPAN (JBOD - Just a Bunch Of Disks): Drives are concatenated to form one large logical volume. Data is written sequentially to the first drive until it's full, then to the second. This mode offers combined capacity but no performance improvement or data redundancy. Warning: If one drive fails, data on both drives may be lost.

7. Одржавање

• Чишћење: Use a soft, dry cloth to clean the exterior of the enclosure. Avoid liquid cleaners or abrasive materials.
• вентилација: Ensure the cooling holes on the enclosure are not obstructed to maintain proper airflow and heat dissipation.
• Правилно гашење: Always safely eject or unmount the drives from your operating system before powering off the enclosure or disconnecting the USB cable to prevent data corruption.
• Ажурирања фирмвера: Check the Yottamaster official webпериодично проверавајте сајт за доступна ажурирања фирмвера за ваш модел.

КСНУМКС. Решавање проблема

Уобичајени проблеми и решења:

• Enclosure not detected by computer:
  • Уверите се да је УСБ кабл безбедно повезан и са кућиштем и са рачунаром.
  • Verify the power adapter is properly connected and the enclosure is powered on.
  • Пробајте други УСБ порт на рачунару или други УСБ кабл.
• Drives not appearing in 'My Computer' or 'Finder':
  • For new drives or after changing RAID modes, drives need to be initialized and formatted. Access Disk Management (Windows) or Disk Utility (macOS) to perform these actions.
  • Ensure drives are correctly installed in the enclosure bays.
  • Check the RAID mode settings via the DIP switches.
• Споре брзине преноса:
  • Ensure you are connected to a USB 3.0 port on your computer.
  • Verify your drives are healthy and not experiencing issues.
  • Check if UASP is enabled by your operating system and drivers.
• RAID mode not functioning as expected:
  • Power off the enclosure. Double-check the DIP switch settings against the manual's diagram.
  • Power on the enclosure and re-initialize/format the drives.
  • Ensure both drives are of similar capacity and type for optimal RAID performance.

9. Спецификације

10. Гаранција и подршка

Yottamaster products come with a standard manufacturer's warranty. For specific warranty terms, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Yottamaster website. You can also contact Yottamaster customer support directly for assistance.