1. Увод
This manual provides essential information for the safe and efficient operation of your EPEVER 3000W Pure Sine Wave Inverter. This inverter converts 24V DC power to 110V AC power, suitable for various off-grid applications. It features a double closed-loop control algorithm for fast response and load impact resistance, ensuring stable and reliable power output.
Кључне карактеристике укључују:
- 3000W continuous power output, 6000W surge power for 5 seconds.
- Компатибилан са 24В литијумским и оловним батеријама.
- Rotatable LCD meter for monitoring and parameter configuration.
- Remote control capability via phone apps and PC software.
- Built-in electronic safeguards for comprehensive protection.
2. Безбедносна упутства
Read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Осигурајте правилно уземљење претварача.
- Do not expose the inverter to rain, snow, spray, or excessive dust.
- Install the inverter in a well-ventilated area to prevent overheating.
- Не отварајте инвертор casinг; унутра нема делова које корисник може сам да поправи.
- Disconnect all power sources before performing any wiring or maintenance.
- Use appropriate wire gauges for all connections to prevent overheating and ensure efficient power transfer.
- Држите децу даље од инвертора и његових прикључака.
3. Компоненте производа
Familiarize yourself with the various parts of your EPEVER inverter:
4. Подешавање и инсталација
Follow these steps for proper installation of your inverter:
4.1 Монтажа
- Изаберите суво, добро проветрено место, даље од директне сунчеве светлости и извора топлоте.
- Ensure adequate clearance around the inverter for airflow (minimum 150mm on all sides for air intake and outlet).
- Mount the inverter securely to a stable surface using appropriate fasteners.
4.2 Ожичење
The inverter features a push-on terminal design for easy wire installation without a screwdriver for the AC output. For DC input, use the screw terminals.
- уземљење: Connect the grounding terminal (10) to an earth ground.
- ДЦ улаз: Connect the positive (1) and negative (2) DC input terminals to your 24V battery bank. Ensure correct polarity.
- АЦ излаз: Connect your AC loads to the AC outlet (5). The push-on terminals simplify this connection.
- Опционе везе: Connect the RS485 communication port (6) or USB output port (7) for remote monitoring or charging devices.
4.3 Компатибилност батерија
The inverter is compatible with both 24V lithium and lead-acid batteries (AGM/GEL/LFP).
5. Упутство за употребу
5.1 Укључивање/искључивање
- To power on, ensure all connections are secure, then press the inverter switch (9). The LCD will illuminate.
- To power off, press the inverter switch (9) again.
5.2 ЛЦД екран и контроле
The rotatable LCD meter (4) provides real-time status and allows parameter configuration.
5.3 Даљински надзор
The inverter supports remote control and monitoring via phone applications and PC software using the RS485 communication port (6) or an optional eBox-WIFI-01 module.
5.4 Load Compatibility
The inverter is suitable for a wide range of daily appliances. Ensure the total wattage of connected appliances does not exceed the inverter's rated power.
6. Одржавање
Редовно одржавање осигурава оптималне перформансе и дуготрајност вашег инвертора.
- Чишћење: Периодично чистите спољашњост инвертора сувом крпом. Уверите се да су вентилациони отвори без прашине и остатака.
- Везе: Check all electrical connections regularly to ensure they are tight and free from corrosion.
- Окружење: Maintain a suitable operating environment, avoiding extreme temperatures and humidity.
КСНУМКС. Решавање проблема
Ако наиђете на проблеме са инвертором, погледајте следеће уобичајене проблеме и решења:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Инвертор се не укључује | No DC input power; Loose battery connections; Low battery voltage | Проверите прикључке батерије и волtage; Ensure battery is charged; Verify inverter switch is ON. |
| Нема излаза наизменичне струје | Overload; Short circuit; Over-temperature; Inverter fault | Reduce load; Check for short circuits in AC wiring; Allow inverter to cool; Check fault indicator on LCD. |
| Fault indicator (red) is on | Internal fault; Input/output protection triggered | Refer to the LCD display for specific error codes if available; Disconnect loads and restart inverter; If fault persists, contact support. |
| Мала излазна снага | Ниска запремина батеријеtage; Excessive load; Poor DC connections | Charge battery; Reduce load; Tighten DC connections. |
8. Техничке спецификације
| Спецификација | Валуе |
|---|---|
| Бранд | ЕПЕВЕР |
| Назив модела | 3000В |
| Називни улазни волtage | 24ВДЦ |
| Оутпут Волtage | 110VAC (±3%); 120VAC (-7%~+3%) |
| Излазна фреквенција | 50/60Хз ±0.2% |
| Континуирана излазна снага | 3000 Ваттс |
| Peak Output Power (Surge) | 6000 вати (за 5 секунде) |
| Electrical Output Waveform | Чисти синусни талас |
| УСБ излаз | 5ВДЦ/Мак.1А |
| РС485 комуникациони порт | 5ВДЦ / 200мА |
| Компатибилни типови батерија | 24V Lithium and Lead-acid battery |
| Број продајних места | 1 |
| Energy Specifications Met | IEC62109, EN61000, RoHS |
| Тежина артикла | 23.2 фунти |
9. Информације о гаранцији
This EPEVER inverter comes with a 1 година гаранције from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications. Please retain your proof of purchase for warranty claims.
10. Корисничка подршка
For technical assistance, troubleshooting, or warranty inquiries, please contact EPEVER customer support through their official website or the contact information provided with your purchase. When contacting support, please have your product model number (3000W) and purchase details ready.