LEDONE Full Cut Off 60W LED Wall Pack Light

1. Увод

This manual provides essential information for the safe installation, operation, and maintenance of your LEDONE Full Cut Off 60W LED Wall Pack Light. Please read these instructions thoroughly before installation and retain them for future reference. This fixture is designed for outdoor use in commercial and industrial settings, featuring a full cut-off design to minimize light pollution and a built-in photocell for dusk-to-dawn operation.

Слика 1.1: Предња страна view of the LEDONE 60W Full Cut Off LED Wall Pack Light. This image displays the fixture's dark bronze housing and the array of LED lights behind a clear, tempered glass lens.

2. Безбедносне информације

• УПОЗОРЕЊЕ: Опасност од струјног удара. Искључите напајање преко осигурача или прекидача пре инсталације или сервисирања.
• Инсталацију мора да изврши квалификовани електричар у складу са свим националним и локалним електричним прописима.
• Уверите се да је залиха волtage is compatible with the fixture (120-277V AC).
• Do not handle live wires.
• Носите заштитне наочаре и рукавице током инсталације.
• Ensure the fixture is securely mounted to prevent falling.
• Не покушавајте да модификујете уређај. Било какве модификације ће поништити гаранцију.

3. Садржај пакета

Verify that all components are present and undamaged before installation.

• 1 x LEDONE Full Cut Off 60W LED Wall Pack Light Fixture
• Mounting Hardware (screws, anchors, gaskets)
• Упутство за употребу (овај документ)

4. Спецификације

Image 4.1: Dimensional drawing of the LEDONE 60W Wall Pack Light, showing measurements of 11.5 inches (293mm) in length, 10.8 inches (275mm) in width, and 3.9 inches (100mm) in height.

5. Подешавање и инсталација

Пре него што почнете:

• Искључите струју на прекидачу или кутији са осигурачима.
• Ensure the mounting surface is structurally sound and can support the fixture's weight.
• Have necessary tools ready: screwdriver, wire strippers, drill, sealant (if required for weatherproofing).

Упутства за монтажу:

1. Carefully remove the fixture from its packaging.
2. Detach the mounting plate from the back of the fixture.
3. Position the mounting plate on the desired wall location. Mark the drilling points for the mounting screws.
4. Drill pilot holes and insert appropriate anchors if necessary.
5. Secure the mounting plate to the wall using the provided screws. Ensure it is level and tight.

Слика 5.1: Позади view of the LEDONE 60W Wall Pack Light, illustrating the integrated mounting bracket and conduit entry point for electrical wiring.

Упутства за ожичење:

6. Feed the electrical supply wires through the conduit entry point on the mounting plate.
7. Connect the fixture's wires to the supply wires using appropriate wire connectors:
   • Black wire (Fixture) to Live/Hot wire (Supply)
   • White wire (Fixture) to Neutral wire (Supply)
   • Green/Ground wire (Fixture) to Ground wire (Supply)
8. Уверите се да су сви прикључци сигурни и правилно изоловани.
9. Carefully tuck all wires into the junction box or mounting plate cavity.
10. Attach the fixture body to the mounting plate, ensuring a tight seal to maintain IP65 rating. Secure with screws.
11. Apply silicone sealant around the edges of the fixture and conduit entry points if necessary to prevent water ingress.
12. Вратите напајање на прекидач.

6. Упутство за употребу

This LED wall pack light is equipped with a built-in photocell for automatic dusk-to-dawn operation. No manual intervention is required after installation.

• Dusk-to-Dawn Function: The integrated photocell sensor detects ambient light levels. The fixture will automatically turn ON when natural light falls below a certain threshold (dusk) and turn OFF when sufficient natural light is detected (dawn).
• Rotatable Fixture: The fixture can be rotated by 15 degrees to adjust the light direction. This adjustment should be made during installation or maintenance when power is OFF. Loosen the appropriate screws, adjust the angle, and re-tighten securely.

Image 6.1: LEDONE 60W Wall Pack Lights installed on the exterior of a commercial building at night, demonstrating their effective illumination for large outdoor areas.

7. Одржавање

The LEDONE Wall Pack Light is designed for minimal maintenance. Regular inspection and cleaning will ensure optimal performance and longevity.

• Чишћење: Periodically clean the exterior of the fixture, especially the lens and photocell, with a soft, damp cloth to remove dirt, dust, and debris. Ensure power is OFF before cleaning. Do not use abrasive cleaners or solvents.
• инспекција: Годишње проверавајте уређај да ли има знакова оштећења, лабавих жица или корозије. Уверите се да су сви монтажни завртњи чврсто затегнути.
• фотоћелија: Keep the photocell sensor clear of obstructions (e.g., leaves, dirt, paint) to ensure proper dusk-to-dawn operation.

КСНУМКС. Решавање проблема

9. Информације о гаранцији

The LEDONE Full Cut Off 60W LED Wall Pack Light is covered by a Ограничена гаранција. This product is designed for a long operational life of approximately 50,000 hours. For specific warranty terms and conditions, please refer to the warranty documentation provided at the time of purchase or contact LEDONE customer service.

10. Подршка

LEDONE is committed to providing quality lighting solutions and customer service. If you have any questions, require technical assistance, or need to report an issue with your product, please contact LEDONE customer support. Our team is based in California and ready to assist you.

For further assistance, please visit the official LEDONE webсајт или погледајте документацију о куповини за контакт податке.