KOLINK PGW-AC-KOL-042

Kolink RGB Extension Cable - 50cm User Manual

Model: PGW-AC-KOL-042

1. Увод

This manual provides instructions for the proper installation, operation, and maintenance of your Kolink RGB Extension Cable. Please read this manual thoroughly before use to ensure safe and efficient operation.

The Kolink RGB Extension Cable is designed to extend the reach of your 4-pin RGB lighting connections within your PC system, offering greater flexibility for component placement and aesthetic customization.

2. Безбедносне информације

  • Ensure your PC system is powered off and unplugged from the wall outlet before installing or removing any components.
  • Handle the cable by its connectors, not by the wires, to prevent damage.
  • Do not expose the cable to excessive force, sharp objects, or extreme temperatures.
  • This product is intended for indoor use within a computer chassis.
  • Verify that the connector type (4-pin RGB) matches your devices before connection. Incorrect connection may cause damage.

3. Садржај пакета

Ваш пакет треба да садржи следећу ставку:

  • 1x Kolink RGB Extension Cable (50cm)
Kolink RGB Extension Cable, 50cm length, black, with 4-pin male and female connectors

Слика 1: Kolink RGB Extension Cable. This image shows the 50cm black extension cable with its 4-pin male and female connectors, designed for extending RGB lighting connections within a PC.

4. Подешавање и инсталација

  1. Систем за искључивање: Ensure your computer is completely powered off and disconnected from the main power supply.
  2. Идентификујте конекторе: Locate the 4-pin RGB header on your motherboard or existing RGB controller, and the 4-pin RGB connector on the device you wish to extend (e.g., an RGB fan or LED strip).
  3. Connect Extension Cable: Carefully connect the мушки end of the Kolink RGB Extension Cable to the женски 4-pin RGB header on your motherboard or controller. Ensure the pins align correctly and the connection is secure.
  4. Повежите уређај: Повежите женски end of the Kolink RGB Extension Cable to the мушки 4-pin RGB connector of your RGB device. Again, ensure correct pin alignment and a secure connection.
  5. Управљање кабловима: Route the cable neatly within your PC case, ensuring it does not obstruct airflow or interfere with moving parts like fans. The tangle-free design assists with this.
  6. Систем за укључивање: Once all connections are secure, close your PC case, reconnect the power supply, and power on your system.

5. Операција

The Kolink RGB Extension Cable functions as a passive extension for your 4-pin RGB signals. Once connected, the RGB device will operate as if it were directly connected to the motherboard or controller, allowing you to control its lighting effects through your system's existing RGB software or hardware controls.

No additional software or drivers are required for the cable itself.

6. Одржавање

  • Чишћење: If necessary, gently wipe the cable with a dry, lint-free cloth to remove dust. Do not use liquid cleaners.
  • инспекција: Periodically inspect the cable for any signs of wear, fraying, or damage to the connectors. If damage is observed, discontinue use and replace the cable.
  • Складиштење: When not in use, store the cable in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid sharp bends or kinks.

КСНУМКС. Решавање проблема

ПроблемМогући узрокРешење
RGB device not lighting up.Loose connection, incorrect pin alignment, or faulty RGB device/controller.Ensure all 4-pin connections are secure and correctly aligned. Verify the RGB device works when connected directly. Check motherboard/controller settings.
Нетачне боје или треперење.Loose connection, software issue, or incompatible RGB standard.Check connections. Update or reinstall RGB control software. Ensure your device uses the 4-pin 12V RGB standard (not 3-pin 5V ARGB).
Кабл изгледа оштећен.Физичка штета.Discontinue use immediately. Replace the cable.

8. Спецификације

  • Бренд: КОЛИНК
  • Модел: ПГВ-АЦ-КОЛ-042
  • Тип кабла: RGB Extension Cable
  • Тип конектора: 4-pin RGB (Male-to-Female)
  • дужина: 50 цм
  • Број пинова: 4
  • Макимум Волtage: 5 волти (ДЦ) (Note: Standard 4-pin RGB is typically 12V. Users should verify their device's voltage requirement to ensure compatibility.)
  • Посебна карактеристика: Тангле Фрее
  • Препоручена употреба: PC fan extension, RGB lighting extension
  • Боја: Црно
  • Усклађеност: РоХС

9. Гаранција и подршка

Kolink products are manufactured to high-quality standards. For warranty information and technical support, please refer to the official Kolink webсајт или контактирајте продавца. Сачувајте доказ о куповини за потребе гаранције.

EU Spare Part Availability Duration: 1 Year (as per product specifications).

© 2024 KOLINK. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.