SINOTIMER TM618 -7 Days Programmable Weekly Timer Module

1. Готовоview

The SINOTIMER TM618 timer module is designed to automatically control the power supply to various electrical apparatus, such as streetlights, neon signs, billboards, and other appliances, based on a preset time schedule. This digital timer switch features a rechargeable internal battery to maintain program settings during power outagес.

Слика 1.1: Предња страна view of the TM618 Timer Module.

2. Кључне карактеристике

• Компактан дизајн који штеди простор.
• Engineered with advanced digital timing technology.
• High functionality for precise time control.
• Built-in rechargeable battery for program retention.
• Multiple ON/OFF programs for weekly scheduling.

3. Подешавање и инсталација

3.1. Dijagram ožičenja

Proper wiring is crucial for the safe and correct operation of the TM618 timer module. Refer to the diagram below for connection details. Ensure power is disconnected before performing any wiring.

Figure 3.1: Wiring Terminals and Specifications.

• Input (200-250VAC): Connect your main power supply to terminals 1 and 2.
• Output (16 AMP / 250VAC, 20 AMP @30 VDC): Terminals 3, 4, and 5 are for the controlled output. Terminal 3 is common, Terminal 4 is normally open (NO), and Terminal 5 is normally closed (NC). Connect your load to the appropriate terminals based on your application (e.g., between 3 and 4 for normally off, turning on when timed).

3.2. Initial Power-Up and Battery

Upon initial power-up, the timer's internal rechargeable battery (40mAh) will begin charging. This battery saves your programmed settings during power interruptions. Allow the unit to be powered for at least 30 minutes for the battery to gain sufficient charge before programming or disconnecting power.

Figure 3.2: Internal 40mAh Rechargeable Battery.

Figure 3.3: TM618 Operating Voltage (220V AC shown).

4. Упутство за употребу

The TM618 timer allows for precise control with up to 16 ON/OFF programs per day or week. The buttons on the front panel are used for setting the time and programs.

Figure 4.1: Timer Module with Manual.

4.1. Подешавање тренутног времена

1. Притисните тастер ЦЛОЦК дугме и држите га.
2. Док држи ЦЛОЦК, притисните НЕДЕЉА да подесите тренутни дан у недељи.
3. Док држи ЦЛОЦК, притисните ХОУР да подесите тренутни сат.
4. Док држи ЦЛОЦК, притисните МИН да подесите тренутни минут.
5. Отпустите ЦЛОЦК дугме. Време је сада подешено.

4.2. Програмирање времена укључивања/искључивања

Тајмер подржава до 16 програма за укључивање/искључивање. Сваки програм се састоји од времена укључивања и времена искључивања.

1. Притисните тастер ПРОГ дугме једном. На дисплеју ће се приказати „1 УКЉУЧЕНО“.
2. Притисните НЕДЕЉА to select the day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU, or combinations like MO-FR, SA-SU, MO-SA, etc.).
3. Притисните ХОУР да бисте подесили жељени сат укључивања.
4. Притисните МИН да бисте подесили жељени минут укључивања.
5. Притисните ПРОГ поново. На дисплеју ће се приказати „1 ИСКЉУЧЕНО“.
6. Repeat steps 2-4 to set the desired OFF day(s), hour, and minute for this program.
7. Притисните ПРОГ to advance to the next program ("2 ON") or to exit programming mode if no more programs are needed.
8. To clear a program, press РЕЦАЛЛ док viewing the specific ON or OFF program you wish to clear.

4.3. Мануал Оверриде

Притисните тастер МАНУАЛ button to cycle through different operating modes:

• АУТО УКЉУЧЕНО: The timer is currently ON and will follow the programmed schedule.
• АУТОМАТСКО ИСКЉУЧЕНО: The timer is currently OFF and will follow the programmed schedule.
• НА: The timer is forced ON, overriding any programs.
• ВАН: The timer is forced OFF, overriding any programs.

4.4. Recall Function

Тхе РЕЦАЛЛ button (often marked 'R' or 'RESET') is used to clear specific program settings or to reset the timer. A small pinhole button (R) is typically used for a full reset, which clears all programs and resets the time.

5. Одржавање

5.1. Брига о батерији

The TM618 features a built-in rechargeable battery. To ensure its longevity and proper function, keep the timer connected to power for regular charging. If the timer is stored for extended periods without power, the battery may discharge, requiring a full charge upon reconnection.

5.2. Чишћење

Clean the exterior of the timer module with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic casing or display. Ensure no liquids enter the device.

КСНУМКС. Решавање проблема

• Екран је празан: Check power connections. Ensure the unit has been powered for at least 30 minutes to charge the internal battery.
• Programs not executing: Verify that the current time is set correctly. Check that the timer is in "AUTO ON" or "AUTO OFF" mode, not forced ON/OFF. Review your programmed ON/OFF times for accuracy.
• Timer not responding to buttons: Perform a full reset using the small 'R' pinhole button. If issues persist, ensure proper power supply.

7. Спецификације

7.1. Димензије

Figure 7.1: Front Dimensions.

Figure 7.2: Side Dimensions.

8. Гаранција и подршка

For information regarding product warranty, technical support, or service, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.