Behringer STUDIO L User Manual

1. Увод

The Behringer STUDIO L is a comprehensive studio control and communication center designed to streamline your audio workflow. It integrates essential studio functions into a single, compact unit, offering high-quality audio performance and versatile connectivity for professional and home studio environments.

Кључне карактеристике укључују:

• Premium, ultra-low noise and high headroom studio control.
• All-in-one master volume controller, source selector, monitor switcher, and talkback box.
• Two state-of-the-art Midas mic preamplifiers with +48 V phantom power.
• Audiophile 192 kHz 2x2 USB audio interface, ideal for computer-based studios.
• True VCA control for extremely precise level control and stereo tracking.

2. Производ је готовview

The STUDIO L provides intuitive control over your studio monitoring and communication. Below is an overview of the device's front and rear panels.

Слика 2.1: Front panel of the Behringer STUDIO L, showing all controls and indicators.

Слика 2.2: Rear panel of the Behringer STUDIO L, displaying all input and output connections.

3. Подешавање и везе

Follow these steps to set up your Behringer STUDIO L and connect it to your studio equipment.

3.1 Прикључак за напајање

1. Прикључите приложени адаптер за напајање на ДЦ ИН порт на задњој плочи.
2. Укључите адаптер за напајање у одговарајућу електричну утичницу.
3. Осигурајте ПОВЕР switch on the rear panel is in the OFF position before connecting.

3.2 УСБ веза

The STUDIO L functions as a 192 kHz 2x2 USB audio interface. Connect it to your computer for audio recording and playback.

1. Повежите USB кабл са УСБ port on the rear panel of the STUDIO L to an available USB port on your computer.
2. The device is compatible with Personal Computers running Windows operating systems. Ensure necessary drivers are installed if required by your operating system.

3.3 Повезивање аудио улаза

The STUDIO L features two Midas mic preamplifiers and additional stereo inputs.

Слика 3.1: Utilizing the Midas mic preamplifiers for vocal recording.

• Mic/Line Inputs (1L, 2R): Connect microphones or line-level instruments to the XLR/TRS combo jacks on the rear panel. Activate +48В phantom power for condenser microphones using the dedicated button on the front panel.
• Stereo Inputs (3/4): Connect stereo line-level sources (e.g., synthesizers, media players) to the 1/4-inch TRS jacks on the rear panel.
• Stereo In (5/6): An additional stereo input is available on the front panel for quick connection of portable devices.

3.4 Повезивање аудио излаза

Connect your studio monitors and headphones to the STUDIO L.

• Monitor Outputs (A, B, C): Connect up to three pairs of studio monitors to the balanced/unbalanced 1/4-inch TRS jacks on the rear panel.
• 2-Track Output: Provides an additional stereo output for recording or routing to other devices.
• Headphone Outputs (1, 2): Connect up to two pairs of headphones to the 1/4-inch TRS jacks on the front panel.

4. Операција

This section details the operational aspects of the Behringer STUDIO L.

4.1 Укључивање/искључивање

1. After all connections are made, flip the ПОВЕР switch on the rear panel to the ON position.
2. Тхе ПОВЕР и УСБ indicators on the front panel will illuminate.

4.2 Input Gain and Trim

Adjust the input levels for optimal signal quality.

• Користите ГАИН knobs for inputs 1(L) and 2(R) to set the primary input level for microphones or instruments.
• Тхе ТРИМ knobs for inputs 1/2, 3/4, and 5/6 allow for fine-tuning of the input levels.
• Monitor the input level meters to prevent clipping (red CLIP indicator).

4.3 Избор извора

Select which input source you want to monitor.

• Користите ИНПУТС buttons (1/2, 3/4, 5/6) to select the desired input source for monitoring.
• Тхе УСБ button selects the audio stream from your computer.
• Тхе 2-TR SOURCE SELECT allows you to choose between 2-TR IN 1/2 or 2-TR IN 3/4 for monitoring.

4.4 Monitor Selection and Volume

Control which set of studio monitors is active and adjust the overall listening volume.

• Притисните тастер МОНИТОР СЕЛЕЦТ buttons (A, B, C) to switch between your connected studio monitor pairs.
• Велики ВОЛУМЕ knob controls the master output level to the selected monitors. This knob utilizes VCA control for precise and accurate level adjustments.
• Притисните тастер МОНО button to check your mix in mono.
• Притисните тастер ДИМ button to temporarily reduce the monitor volume by a fixed amount.

Слика 4.1: ВЦА (Волtagе Контролисано Amplifier) control ensures accurate and consistent volume adjustments.

4.5 Talkback Function

Communicate with artists in the recording booth or other studio areas.

Слика 4.2: Talkback and Cue controls for studio communication.

• Притисните тастер ОДГОВОРИ button to activate the internal microphone and speak to the cue mix.
• Подесите ОДГОВОРИ volume knob to control the level of your voice in the cue mix.
• An external microphone can be connected to the ЕКСТ МИЦ XLR input on the rear panel for talkback.

4.6 Headphone Monitoring

The STUDIO L provides two independent headphone outputs.

• Connect your headphones to ТЕЛЕФОНИ 1 or ТЕЛЕФОНИ 2 на предњој плочи.
• Прилагодите појединца ВОЛУМЕ knobs for each headphone output.
• Тхе CUE SOURCE section allows you to select the source for the headphone mixes (Inputs, Cue, 2-TR Cue).

5. Техничке спецификације

Below are the technical specifications for the Behringer STUDIO L.

6. Нега и одржавање

To ensure the longevity and optimal performance of your Behringer STUDIO L, follow these care and maintenance guidelines:

• Чишћење: Use a soft, dry cloth to clean the exterior of the unit. Avoid abrasive cleaners, solvents, or waxes, as these can damage the finish and controls.
• Окружење: Operate the device in a clean, dry environment away from direct sunlight, excessive heat, moisture, and dust.
• вентилација: Ensure proper ventilation around the unit to prevent overheating. Do not block any ventilation openings.
• Руковање: Пажљиво рукујте уређајем. Избегавајте испуштање или излагање јаким ударцима.
• Снага: Always disconnect the power adapter from the wall outlet if the unit will be unused for an extended period.

КСНУМКС. Решавање проблема

If you encounter issues with your Behringer STUDIO L, refer to the following common troubleshooting steps:

7.1 Нема напајања

• Ensure the power adapter is securely connected to both the STUDIO L and a working electrical outlet.
• Проверите да ли је ПОВЕР switch on the rear panel is in the ON position.
• Проверите да ли је утичница функционална тако што ћете укључити други уређај.

7.2 Без звучног излаза

• Check all audio cable connections to your monitors and headphones.
• Осигурајте ВОЛУМЕ knob on the front panel is turned up.
• Проверите да ли је тачно МОНИТОР СЕЛЕЦТ (A, B, or C) is active for your connected speakers.
• Confirm that the correct input source (e.g., УСБ, 1/2, 3/4) is selected.
• If using headphones, ensure their individual ВОЛУМЕ knobs are turned up and the correct CUE SOURCE је изабрано.
• For USB audio, check your computer's sound settings to ensure the Behringer STUDIO L is selected as the output device.

7.3 Изобличени звук

• Смањите ГАИН и ТРИМ levels for your inputs to prevent clipping, indicated by the red CLIP LED.
• Check the input levels on your computer's DAW or audio software.
• Ensure all cables are in good condition and properly connected.

7.4 Talkback Not Working

• Осигурајте ОДГОВОРИ button is pressed and its volume knob is turned up.
• If using an external microphone, ensure it is properly connected to the ЕКСТ МИЦ input and the INT/EXT switch is set to EXT.
• Verify that the cue mix is routed to the headphones or monitors where the artist is listening.

8. Гаранција и подршка

За детаљне информације о гаранцији и техничкој подршци, обратите се званичном Behringer-овом webсајт или директно контактирајте њихову корисничку службу. Сачувајте рачун као доказ о куповини за евентуалне рекламације по гаранцији.