1. Увод
This manual provides detailed instructions for the safe and effective use of the GYS 059856 Paint Thickness Gauge. This portable device is designed for quick and easy measurement of non-magnetic coatings (such as paint or film) on metallic surfaces. It is an essential tool for various applications including the processing industry, automotive repair, metal treatment, chemical industry, and goods inspection.
Молимо вас да пажљиво прочитате ово упутство пре употребе уређаја и сачувајте га за будућу употребу.
2. Безбедносне информације
- Always ensure the device is clean and dry before use.
- Не излажите уређај екстремним температурама, влажности или директној сунчевој светлости.
- Избегавајте испуштање или излагање уређаја јаким ударима.
- Не покушавајте сами да растављате или поправљате уређај. За сервис се обратите квалификованом особљу.
- Држите уређај ван домашаја деце.
- Одложите батерије одговорно у складу са локалним прописима.
3. Производ је готовview
The GYS 059856 Paint Thickness Gauge features a compact design with an LCD display and intuitive controls.
Слика 1: Предња страна view of the GYS 059856 Paint Thickness Gauge. The device is yellow with a black LCD screen at the top. Below the screen are three black buttons: 'MODE' on the left, 'UNIT' on the right, and 'ZERO' with a power symbol in the center bottom.
3.1 кључне компоненте
- ЛЦД екран: Shows measurement readings, units, and mode indicators.
- Дугме МОДЕ: Used to switch between measurement modes (Single, Continuous, Differential).
- Дугме УНИТ: Used to switch between metric (µm) and imperial (mils) units.
- Дугме НУЛА: Used for zero calibration and powering the device on/off.
- Measurement Probe: Located at the bottom of the device, used to contact the surface for measurement.
4. Подешавање
4.1 Инсталација батерије
Locate the battery compartment on the back of the device. Insert the required batteries, ensuring correct polarity. Close the battery compartment securely.
4.2 Укључивање/искључивање
Притисните и држите ЗЕРО button to power on the device. To power off, press and hold the ЗЕРО button again. The device also features an automatic shut-off function to conserve battery life.
5. Упутство за употребу
The GYS 059856 offers three measurement modes and supports both metric and imperial units.
5.1 Selecting Measurement Units
Притисните тастер УНИТ button to toggle between metric (µm) and imperial (mils) units.
5.2 режима мерења
Притисните тастер МОДЕ button to cycle through the following measurement modes:
- Режим једног мерења: Takes a single reading each time the probe is placed on the surface.
- Режим континуираног мерења: Continuously takes readings as the probe is moved across the surface.
- Differential Measurement Mode: Displays the difference between the current reading and a previously set reference value.
5.3 Мерење
- Ensure the surface to be measured is clean and free of debris.
- Select the desired measurement unit and mode.
- Place the measurement probe firmly and perpendicularly onto the coated metallic surface.
- Read the thickness value displayed on the LCD screen.
- Lift the device from the surface to prepare for the next measurement (in Single mode).
6. Калибрација
Accurate measurements depend on proper calibration. The device supports three calibration functions:
6.1 Калибрација нуле
This calibration is performed on an uncoated, bare metallic surface to establish a zero reference point. Place the probe on a clean, uncoated metal surface and follow the on-screen instructions or refer to the device's specific calibration sequence (usually involving the ЗЕРО дугме).
6.2 Калибрација у две тачке
This method uses two known thickness standards (e.g., a thin film and a thicker film) to calibrate the device across a range. This provides more accurate readings for varying thicknesses.
6.3 Easy Calibration
Refer to the device's specific instructions for "Easy Calibration," which may involve a simplified process for quick adjustments.
Note: Always calibrate the device before critical measurements or if you suspect inaccurate readings.
7. Одржавање
- Чишћење: Обришите уређај меком, сувом крпом. Не користите абразивна средства за чишћење или раствараче.
- Складиштење: Store the device in a dry, cool place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries.
- Брига о сонди: Keep the measurement probe clean and free from scratches or damage.
КСНУМКС. Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Уређај се не укључује. | Слабе или празне батерије; погрешан поларитет батерија. | Замените батерије; проверите оријентацију батерија. |
| Нетачна очитавања. | Device not calibrated; dirty probe; surface not clean; incorrect measurement mode. | Perform calibration; clean probe and surface; select appropriate measurement mode. |
| Display shows "OL" or "Err". | Measurement range exceeded; sensor error. | Ensure measurement is within device's range; restart device. If error persists, contact support. |
9. Спецификације
- Модел: GYS 059856
- Произвођач: ГИС
- Димензије производа (Д к Ш к В): 10.5 к 6.1 к 2.8 цм
- Тежина: 137 грама
- Принцип мерења: Non-magnetic coating on metallic surfaces
- Јединице мере: Metric (µm), Imperial (mils)
- Режими мерења: Single, Continuous, Differential
- Функције калибрације: Zero calibration, 2-point calibration, Easy calibration
- Аутоматско искључивање: Да
- ASIN: B09GS7G1N4
- Референца произвођача: 059856
- Доступност резервних делова: Информације нису доступне
10. Гаранција и подршка
For warranty information and technical support, please refer to the official GYS website or contact your local distributor. Information regarding spare parts availability is not provided in the product specifications.
GYS Official Webсајт: ввв.гис.фр