HERTZ MP-165P3
HERTZ MP-165P3 Millie Pro 6.5" Mid-Bass Component Woofers Instruction Manual
Model: MP-165P3
Увод
Thank you for choosing HERTZ MP-165P3 Millie Pro 6.5" Mid-Bass Component Woofers. These high-performance car audio woofers are engineered to deliver exceptional sound quality with outstanding dispersion features and a wide low-frequency response. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your speakers.
Подешавање и инсталација
Proper installation is crucial for the performance and durability of your HERTZ MP-165P3 woofers. It is recommended that installation be performed by a qualified professional. Always disconnect the vehicle's battery before beginning any electrical work.
1. Распакивање и преглед
Carefully remove the woofers from their packaging. Inspect all components for any signs of damage. Ensure all listed items are present.

Image: A pair of HERTZ MP-165P3 Millie Pro 6.5" Mid-Bass Component Woofers.

Image: A single HERTZ MP-165P3 woofer shown with included pry tools and a coozy, indicating a bundle.
2. Место монтаже
Select a suitable mounting location in your vehicle, typically door panels or rear deck, that can accommodate the 6.5-inch diameter and mounting depth. Ensure there is sufficient clearance behind the speaker for proper air movement and to avoid interference with vehicle components.
- Дубина уградње: Refer to specifications for exact depth.
- Одобрење: Verify no obstructions behind the mounting surface.
3. Ожичење
Повежите жице звучника са вашег amplifier to the woofer terminals. Pay close attention to polarity (+ and -) to ensure correct phase and optimal sound reproduction. Incorrect wiring can lead to poor audio quality and potential damage.
- Позитивни терминал: Connect to the positive output of the ampлифиер.
- Негативни терминал: Connect to the negative output of the ampлифиер.
- импеданса: These woofers have a 3-Ohm impedance. Ensure your amplifier is stable at this load.

Слика: Са стране view of the HERTZ MP-165P3 woofer, highlighting the magnet structure and wiring terminals.
Упутство за употребу
Once installed, follow these guidelines for operating your HERTZ MP-165P3 woofers:
- Прво појачање: Почните са amplifier gain set to minimum. Gradually increase the volume and adjust amplifier settings to prevent distortion.
- Подешавања скретнице: Искористите своје amplifier's or head unit's crossover settings to filter out frequencies outside the woofer's optimal range (40 Hz to 5 kHz). This protects the speakers and improves sound clarity.
- Контрола јачине звука: Avoid excessive volume levels that cause audible distortion, as this can damage the speakers.
Одржавање
Regular maintenance helps preserve the performance and appearance of your woofers:
- Чишћење: Use a soft, dry cloth to clean the speaker cones and surrounds. Avoid harsh chemicals or abrasive materials.
- инспекција: Periodically check speaker connections for tightness and inspect the cone and surround for any signs of damage or wear.
- Фактори животне средине: While designed for car environments, extreme temperatures and direct sunlight can affect speaker longevity.
Решавање проблема
If you encounter issues with your HERTZ MP-165P3 woofers, refer to the following common problems and solutions:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Нема звука | Loose wiring, amplifier off, incorrect source selection. | Check all wiring connections, ensure amplifier is powered on, verify audio source. |
| Дистортед Соунд | Amplifier gain too high, incorrect crossover settings, damaged speaker. | Смањите amplifier gain, adjust crossover frequencies, inspect speaker for physical damage. |
| Слаб бас | Incorrect wiring polarity, insufficient power, improper enclosure. | Verify wiring polarity, ensure adequate power from amplifier, check speaker enclosure for proper sealing. |
Спецификације
Detailed technical specifications for the HERTZ MP-165P3 Millie Pro 6.5" Mid-Bass Component Woofers:
- Величина: 165 мм (6.5 инча)
- Power Handling - Peak: 180 В
- Power Handling - Continuous: 90 В
- импеданса: 3 Охм
- Фреквенцијски одзив: 40 Хз – 5 кХз
- Осетљивост: 93 дБ СПЛ
- Пречник спиралне завојнице: 25 мм (1 инча)
- Материјал магнета: ферит
- Материјал конуса: Pressed-Pulp Cone with Cotton Fibers
- Окрузити: "Boundary Free" Rubber Surround
- корпа: Low mounting depth, acoustically transparent aluminium alloy
- Тежина артикла: 5.3 фунти
- Димензије производа: 19"D x 9"W x 15"H (Note: These dimensions seem to be for the package, not individual speakers. Refer to mounting depth for actual speaker fitment.)

Слика: Фронт view of the HERTZ MP-165P3 woofer, showcasinг конус и окружење.

Слика: Одозго надоле view of the HERTZ MP-165P3 woofer, showing the full cone surface.
Информације о гаранцији
This product comes with a Limited Warranty. For specific terms and conditions, please refer to the warranty card included with your product or contact HERTZ customer support.
Корисничка подршка
For further assistance, technical support, or service inquiries, please visit the official HERTZ webсајту или контактирајте њихову службу за кориснике. Више информација можете пронаћи на HERTZ Store on Amazon.
Видео снимци производа
HERTZ Dieci Series DCX-1653 Product Overview
Видео: Овај видео пружа општи прегледview of the HERTZ Dieci Series DCX-1653 speakers, highlighting features like the water-repellent cone, neodymium tweeter, and ferrite woofer magnet. It demonstrates the speaker's construction and mentions its 120W max output and optimized frequency response.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.