eXtremeRate PS5 Controller RISE Remap Kit Instruction Manual

1. Увод

This manual provides detailed instructions for installing and operating the eXtremeRate RISE Remap Kit for your PlayStation 5 (PS5) controller. This kit allows you to add programmable back paddles, transforming your standard controller into an elite eSport controller. Please read all instructions carefully before proceeding with installation.

2. Компатибилност

This eXtremeRate RISE Remap Kit is compatible only with PS5 controller models БДМ-010 и БДМ-020. It is not compatible with BDM-030 or newer models.

How to Check Your Controller's BDM Model:

1. Method 1: Check the R2/L2 Trigger Shape. Observe the side or spring shape of your R2/L2 triggers. Different shapes correspond to different BDM models.
2. Method 2: Inspect the Mainboard. Disassemble your controller and check the model number printed on the mainboard.

For a visual guide on checking your BDM model, search YouTube for "extremerate check bdm for ps5 controller" or "fiE4BWSlBRI".

This kit is also compatible with other eXtremeRate accessories such as the LED Kit, Clicky Trigger Kit, Face Clicky Kit, and SDP Buttons for PS5 controllers.

3. Садржај пакета

The eXtremeRate RISE Remap Kit typically includes the following components:

• RISE Remap Board
• FPC Cables (for BDM-010 and BDM-020)
• Redesigned Back Case with Rubberized Grips
• 2 Programmable Back Button Attachments
• Дугме за подешавање
• Screwdriver and Prying Tool
• Резервни завртњи

4. Подешавање и инсталација

Installation of this kit requires disassembling your PS5 controller. Please proceed with caution. Soldering is optional for basic functionality but may be required for advanced features (e.g., L3/R3, Touchpad remapping).

Важна разматрања:

• Ризик од оштећења: Disassembling your controller carries a risk of damage. eXtremeRate is not responsible for any damage to your controller during installation. Proceed at your own risk.
• Video Guide Recommended: For a comprehensive step-by-step installation guide, it is highly recommended to watch the official video tutorial.

Кораци инсталације (прекоview):

1. Disassemble your PS5 controller using the provided tools.
2. Identify your controller's BDM model (BDM-010 or BDM-020) and select the corresponding FPC cable.
3. Install the RISE Remap Board and connect the FPC cables according to the video instructions.
4. If your controller is BDM-020, ensure the FPC cable is folded correctly as shown in the diagram.
5. Reassemble the controller with the new back case and back button attachments.

Званични видео о инсталацији:

For detailed visual instructions, please refer to the official eXtremeRate installation video on YouTube. Тражи: "eXtremeRate RISE 2.0 Remap Kit for ps5" or "QzSqI_qsKXM".

5. Operating Instructions (Button Remapping)

The eXtremeRate RISE Remap Kit allows you to assign up to 15 different controller buttons to the two back paddles. This includes X, O, Triangle, Square, Up, Down, Left, Right, L1, L2, R1, R2, L3, R3, and the Touchpad Button.

Remapping Process:

1. Уђите у режим програмирања: Press and hold the Setting Button (located on the back of the controller) for 3 seconds until the LED Indicator (also on the back) blinks slowly.
2. Assign a Button: Press the back paddle you wish to program, then press the face button or trigger you want to assign to it.
3. Сачувај подешавање: Press the Setting Button again to exit programming mode. The LED Indicator will turn off, confirming the new assignment is saved.
4. Repeat for Second Paddle: Follow the same steps to program the other back paddle.

6. Одржавање

To ensure the longevity and optimal performance of your eXtremeRate RISE Remap Kit and PS5 controller, follow these maintenance guidelines:

• Одржавајте контролер чистим и без прашине и прљавштине. Користите меку, суву крпу за чишћење.
• Avoid exposing the controller to liquids or excessive moisture.
• Store the controller in a safe place to prevent physical damage.
• Do not attempt to force buttons or paddles, as this may cause internal damage.

КСНУМКС. Решавање проблема

If you encounter issues after installing the eXtremeRate RISE Remap Kit, consider the following:

• Контролер не функционише: Double-check all internal connections, especially the FPC cables, to ensure they are securely seated. Refer to the installation video for precise connection points.
• Paddles Not Responding: Verify that the remapping process was completed correctly. Re-enter programming mode and re-assign the desired buttons. Ensure the Setting Button was pressed to save the configuration.
• Неисправни делови: If you believe any part of the kit is defective upon arrival or during installation, contact eXtremeRate customer support for assistance and potential replacement.

8. Спецификације

9. Гаранција и подршка

eXtremeRate stands by the quality of its products. If you receive a defective part, it is eligible for replacement. For any issues or support inquiries, please contact eXtremeRate customer service through their official channels or the retailer where the product was purchased.

For further assistance with installation or operation, please refer to the official eXtremeRate YouTube channel for detailed video guides. You can visit the eXtremeRate brand store on Amazon for more products and information: eXtremeRate Amazon Store.