Livpure Glitz Pure UV+UF Water Purifier User Manual

1. Увод

This manual provides essential information for the installation, operation, and maintenance of your Livpure Glitz Pure UV+UF Water Purifier. Please read these instructions carefully before using the appliance to ensure safe and efficient operation. This water purifier is designed for municipal water sources with a Total Dissolved Solids (TDS) level up to 250 ppm.

Figure 1: Livpure Glitz UV+UF Water Purifier in a kitchen setting.

2. Кључне карактеристике

• Мулти-Сtage Purification: The Livpure Glitz DX water purifier employs a multi-stage advanced purification process to ensure clean drinking water. It has a 7-liter storage capacity, providing a continuous supply of purified water. This machine is suitable for input water with TDS less than 500 mg/litre.
• UV+UF Purification Technology: This technology effectively removes bacteria and improves water clarity by eliminating fine suspended impurities.
• Carbon Block Filter: The carbon block filter technology adsorbs undesirable taste, color, and odor-causing organic compounds, enhancing the overall taste of the water.
• Super Sediment Filter: A pre-installed Super Sediment Filter removes physical particulates such as dirt, dust, and mud from the water, protecting the subsequent purification stages and ensuring consistent water quality.
• УВ стерилизација: Optimal Ultraviolet radiation disinfects the water by neutralizing disease-causing bacteria, viruses, and protozoa, safeguarding against microbiological threats.
• Ultra Filtration: Ultra Filtration disinfects water by removing bacteria and viruses without stripping beneficial minerals, ensuring pure and safe water.

Figure 2: Illustration of the 4-stage purification process: Super Sediment Filter, Carbon Block Filter, UV Disinfection, and Ultra Filtration.

Слика 3: Детаљно view of the Carbon Block Filter, responsible for improving water taste and odor.

3. Спецификације

Figure 4: Product dimensions: 29.5 cm (Length) x 27.5 cm (Width) x 50.5 cm (Height).

4. Подешавање и инсталација

For optimal performance and safety, professional installation is recommended. Please ensure the following conditions are met before installation:

1. Распакивање: Carefully remove the purifier from its packaging and check for any damage or missing parts. Refer to the 'What's in the box?' section in specifications.
2. Локација: Choose a suitable wall-mounted location in your kitchen, close to a municipal water inlet and a power outlet. Ensure sufficient space around the unit for maintenance.
3. Прикључак за воду: Connect the purifier to the municipal water supply line. Ensure all connections are secure to prevent leaks.
4. Прикључак за напајање: Укључите кабл за напајање у уземљену електричну утичницу.
5. Почетно испирање: Before first use, flush the system as per the installer's instructions or by dispensing a few liters of water to remove any manufacturing residues.

Слика 5: Предња страна view of the Livpure Glitz UV+UF Water Purifier, ready for installation.

5. Операција

Operating your Livpure Glitz Pure UV+UF Water Purifier is straightforward:

1. Укључено: Ensure the purifier is connected to a power source and switched on. The unit will automatically begin the purification process and fill the storage tank.
2. Дозирање воде: To dispense purified water, simply press or turn the tap located at the front of the unit.
3. Индикатори: Observe the indicator lights on the unit for power status and purification progress. Refer to the specific indicator guide in your detailed product manual for light meanings.

Figure 6: Dispensing purified water from the Livpure Glitz UV+UF Water Purifier.

6. Одржавање

Редовно одржавање осигурава дуготрајност и ефикасност вашег пречистача воде:

• Замена филтера: The Super Sediment Filter, Carbon Block Filter, and UF membrane require periodic replacement. The frequency depends on water quality and usage. Consult your detailed product manual or service provider for recommended replacement schedules.
• УВ Лamp Замена: УВ лamp has a limited lifespan and should be replaced as recommended by the manufacturer to ensure effective sterilization.
• Чишћење: Regularly wipe the exterior of the purifier with a soft, damp cloth. For internal tank cleaning, it is advisable to contact authorized service personnel.

Figure 7: Internal components of the Livpure Glitz UV+UF Water Purifier, including filters that require periodic maintenance.

КСНУМКС. Решавање проблема

If you encounter any issues, refer to the following common troubleshooting steps:

• Нема протока воде: Check if the water supply valve is open and if the power supply is connected. Ensure there are no kinks in the water inlet pipe. Clogged filters can also restrict water flow.
• Bad Taste or Odor: This often indicates that the carbon filter needs replacement. Ensure the initial flush was performed correctly.
• цурење: Immediately turn off the water supply and power. Check all connections for tightness. If the leak persists, contact customer support.
• Индикаторске лампице не раде: Verify the power connection. If the issue continues, there might be an electrical fault requiring professional inspection.

For complex issues, always contact authorized service personnel.

8. Гаранција и подршка

Your Livpure Glitz Pure UV+UF Water Purifier comes with a 1-годишња гаранција произвођача од датума куповине. Ова гаранција покрива производне недостатке у нормалним условима употребе.

For warranty claims, service requests, or technical assistance, please contact Livpure customer support. Free installation is provided with no hidden charges.