RODOT QIACHIP RX480E 433MHz RF Wireless Transmitter and Receiver Module Instruction Manual

1. Увод

This manual provides detailed instructions for the setup, operation, and maintenance of the RODOT QIACHIP RX480E 433MHz RF Wireless Transmitter and Receiver Module. This versatile module is designed for various applications including remote control switches, security systems, smart home devices, and DIY electronics projects. It offers reliable wireless communication with multiple operating modes.

2. Подешавање

2.1. Цомпонентс Оверview

The kit includes the RX480E receiver module, the TX118S-4 transmitter module, and copper spring antennas for both.

Transmitter Module (TX118S-4)

Слика 1: Wiring diagram for the TX118S-4 transmitter module. It shows connections for DC 3V-24V power input, an LED indicator, and four key inputs (K1, K2, K3, K4) connected to ground.

Receiver Module (RX480E)

Слика 2: Pinout diagram for the RX480E receiver module. Pins include GND, +V (power input), D0, D1, D2, D3 (data outputs), and VT (valid transmission indicator). An antenna connection point is also visible.

2.2. Упутства за ожичење

Connect the modules according to the provided diagrams. Ensure correct polarity for power connections to prevent damage.

• Transmitter (TX118S-4): Connect DC 3V-24V to the power input pins. Connect the four key inputs (K1-K4) to ground via push buttons. An LED indicates transmission.
• Receiver (RX480E): Connect DC 3.3V-5V to the +V and GND pins. The D0-D3 pins provide output signals corresponding to the transmitter's key presses. The VT pin indicates a valid signal reception.
• Антена: Attach the copper spring antenna to the designated ANT pin on both the transmitter and receiver modules for optimal range.

Слика 3: A comprehensive circuit diagram illustrating the connection between the TX118S-4 transmitter and the RX480E receiver, including a ULN2003 driver chip for controlling external loads like LEDs.

3. Operating Modes and Pairing

The RX480E receiver module supports multiple operating modes, which are set using the learning button on the receiver. After setting the mode, you can pair your remote control with the receiver.

3.1. Learning Button and Mode Setting

Слика 4: Close-up of the RX480E receiver module highlighting the learning button and indicating the number of presses required to set different operating modes.

• Momentary Mode (Inching Mode): Press the learning button једном. The output will be active only while the corresponding remote button is pressed.
• Toggle Mode (Self-Lock Mode): Press the learning button два пута. Press a remote button once to activate its corresponding output; press the same button again to deactivate it.
• Latched Mode (Interlock Mode): Press the learning button три пута. Press a remote button to activate its corresponding output. All other active outputs will automatically deactivate.

3.2. Процес упаривања

After selecting the desired mode by pressing the learning button the specified number of times, the receiver enters pairing mode. While in pairing mode, press any button on your remote control. The receiver's indicator LED will flash to confirm successful pairing.

3.3. Advanced Operating Modes

The RX480E module also supports advanced combined modes such as 2-channel Toggle + 2-channel Momentary, 2-channel Latched + 2-channel Momentary, and 2-channel Latched + 2-channel Toggle. These modes require specific programming or configuration. For detailed instructions on these advanced modes, please refer to the official support resources or contact customer service.

3.4. Видео демонстрације

For a visual guide on setting up and pairing the RX480E module with various remote controls and demonstrating the different operating modes, please watch the official video below:

4. Одржавање

To ensure the longevity and optimal performance of your RX480E and TX118S-4 modules, follow these simple maintenance guidelines:

• Чувајте чисто и суво: Protect the modules from dust, dirt, and moisture. Avoid exposing them to extreme temperatures or humidity.
• Проверите везе: Периодично проверавајте све спојеве ожичења како бисте били сигурни да су безбедни и да немају корозије.
• Напајање: Увек користите стабилно напајање у оквиру наведене јачине звукаtage range (DC 3V-24V for transmitter, DC 3.3V-5V for receiver).
• Брига о антени: Ensure the copper spring antennas are securely attached and not bent or damaged, as this can affect signal range and reliability.

КСНУМКС. Решавање проблема

If you encounter issues with your RX480E and TX118S-4 modules, refer to the following troubleshooting tips:

• No Signal or Poor Range:
  • Verify that both the transmitter and receiver are powered correctly.
  • Check that the antennas are properly connected and undamaged.
  • Уверите се да даљински управљач има свеже батерије.
  • Смањите растојање између предајника и пријемника.
  • Check for potential sources of RF interference in the environment.
• Incorrect Operating Mode:
  • Re-enter the desired operating mode by pressing the learning button the correct number of times (1 for Momentary, 2 for Toggle, 3 for Latched).
  • Re-pair the remote control with the receiver after setting the mode.
• ЛЕД диоде не реагују:
  • Confirm all wiring connections are correct and secure.
  • Check the power supply to both modules.
  • Ensure the remote control is transmitting a signal (its LED should light up when a button is pressed).

6. Спецификације

6.1. Димензије модула

Receiver Dimensions (RX480E)

Слика 5: Top-down and side view of the RX480E receiver module, showing its compact size with approximate dimensions of 1.1 inches by 0.47 inches.

Transmitter Dimensions (TX118S-4)

Слика 6: Top-down and bottom view of the TX118S-4 transmitter module, illustrating its dimensions of approximately 0.74 inches by 0.74 inches.

7. Гаранција

RODOT products are manufactured to high-quality standards. This product is covered by a limited warranty against defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, unauthorized modifications, or external factors.

8. Корисничка подршка

For technical assistance, troubleshooting, or inquiries regarding advanced operating modes, please contact RODOT customer support:

• Емаил: qiai@qiachip.com
• Онлине продавница: Посетите RODOT Store on Amazon за више производа и информација.