Ideal Standard Ceraplan Single-Lever Basin Mixer (Model BD227AA)

1. Производ је готовview

The Ideal Standard Ceraplan single-lever basin mixer is designed for bathroom sinks, featuring a fixed spout and a 5 liter per minute aerator for water efficiency. It includes a M24x1 aerator, an exhaust control rod, and a 1-1/4" waste. The mixer is equipped with a 38 mm cartridge with an EKO system, contributing to water saving. Its spout height is 88 mm, and it utilizes the Easy Fix+ system for straightforward installation. The finish is chrome.

Слика 1: Страна view of the Ideal Standard Ceraplan Single-Lever Basin Миксер.

Кључне карактеристике:

• Single-lever operation for precise control of water flow and temperature.
• Integrated 5 l/min aerator for reduced water consumption.
• Fixed spout design.
• M24x1 aerator and 1-1/4" waste with control rod.
• 38 mm ceramic cartridge with EKO system.
• 88 mm spout height.
• Easy Fix+ installation system.
• Durable chrome finish.

2. Безбедносне информације

Молимо вас да пажљиво прочитате сва упутства пре инсталације и употребе. Непоштовање ових упутстава може довести до материјалне штете или телесних повреда.

• Уверите се да је главни довод воде искључен пре почетка било какве инсталације или одржавања.
• Ако нисте сигурни у вези са било којим делом процеса инсталације, консултујте квалификованог водоинсталатера.
• Не користите абразивна средства за чишћење или јаке хемикалије на хромираној површини, јер то може оштетити површину.
• Protect the product from freezing temperatures, which can cause damage to internal components.
• Држите мале делове ван домашаја деце.

3. Садржај пакета

Проверите да ли су све компоненте присутне пре почетка инсталације.

• 1 x Ideal Standard Ceraplan Single-Lever Basin Миксер
• 1 x Set of flexible connection hoses
• 1 x Easy Fix+ mounting kit (gasket, washer, nut)
• 1 x 1-1/4" Waste with control rod
• 1 к Упутство за употребу

4. Подешавање и инсталација

This section provides general guidelines for installing your basin mixer. For detailed steps, refer to the technical drawing and consult a professional if needed.

Потребни алати (нису укључени):

• Подесиви кључ
• Шрафцигер
• Заптивна трака (PTFE трака)
• Basin wrench (optional)

Кораци инсталације:

1. Припремите Бasin: Ensure the mounting hole on your basin is clean and free of debris. The mixer requires a single mounting hole.
2. Install the Mixer: Place the mixer onto the basin, ensuring the base gasket is correctly positioned.
3. Secure the Mixer: Испод бasin, slide the washer and then the fixing nut onto the threaded rod of the mixer. Tighten the nut securely using the Easy Fix+ system to prevent movement.
4. Повежите црева за воду: Attach the flexible hot and cold water supply hoses to the corresponding inlets on the mixer. Use sealant tape on the threads for a watertight seal. Connect the other ends of the hoses to your hot and cold water supply lines.
5. Install the Waste: Assemble the 1-1/4" waste according to its separate instructions, ensuring all seals are correctly placed. Insert the waste into the basin's drain hole and secure it from underneath. Connect the control rod to the mixer's lever mechanism.
6. Тест за цурење: Slowly turn on the main water supply. Check all connections for leaks. If leaks occur, tighten connections as necessary.
7. Исперите систем: Run both hot and cold water through the mixer for a few minutes to flush out any debris from the new installation.

Figure 2: Technical drawing with dimensions and installation components.

5. Упутство за употребу

The Ideal Standard Ceraplan basin mixer features a single lever for intuitive control.

• Контрола протока воде: Lift the lever upwards to increase water flow. Push it downwards to decrease flow and turn off the water.
• Контрола температуре: Move the lever to the left for hot water and to the right for cold water. Adjust the position between left and right to achieve the desired water temperature.
• Waste Operation: Use the control rod located at the back of the mixer to open and close the basin waste. Pull the rod up to close the waste and fill the basin; push it down to open the waste and drain the basin.

Слика 3: Врх view of the mixer with hot (red) and cold (blue) indicators.

6. Одржавање

Regular maintenance will ensure the longevity and optimal performance of your Ideal Standard Ceraplan basin миксер.

Чишћење миксера:

• Clean the chrome finish regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome.
• Темељно исперите чистом водом и осушите меком крпом како бисте спречили мрље од воде.
• Немојте користити: Abrasive sponges, scouring pads, harsh detergents, or cleaners containing alcohol, ammonia, or phosphoric acid, as these can damage the finish.

Одржавање аератора:

If water flow decreases or becomes uneven, the aerator may be clogged with sediment.

1. Одврните аератор са краја излива.
2. Separate the aerator components and rinse them under running water.
3. Use a soft brush or toothpick to remove any stubborn mineral deposits or debris.
4. Reassemble the aerator and screw it back onto the spout. Do not overtighten.

КСНУМКС. Решавање проблема

Овај одељак се бави уобичајеним проблемима на које можете наићи са својимasin миксер.

If the problem persists after attempting these solutions, please contact Ideal Standard customer support or a qualified plumber.

8. Спецификације

9. Гаранција и подршка

Ideal Standard products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or visit the official Ideal Standard webсајту.

For technical assistance, spare parts, or any other inquiries, please contact Ideal Standard customer support. Contact information can typically be found on the product packaging or the official Ideal Standard webсајту.

Онлине ресурси: You may find additional support, FAQs, and product information on the Ideal Standard official webсајту.