AOPUTTRIVER AP-570S-APP Bluetooth Clamp Метер Усер Мануал

1. Увод

The AOPUTTRIVER AP-570S-APP is a portable, high-performance digital clamp meter designed for accurate measurement of various electrical parameters. This device features Bluetooth connectivity, allowing it to pair with mobile phones for data logging and analysis. It is suitable for troubleshooting electrical problems in home improvement, appliance repair, line maintenance, and car repair applications.

Image 1.1: The AP-570S-APP Clamp Meter being used in different electrical measurement scenarios, including home wiring, appliance repair, and automotive diagnostics.

2. Безбедносне информације

Please read all safety warnings and operating instructions carefully before using this instrument. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Увек се уверите да јеamp meter is in good working condition before use. Inspect for any damage to the casing, test leads, or insulation.
• Не користите мерач ако изгледа оштећено или ако је изолација оштећена.
• Поштујте све локалне и националне безбедносне прописе.
• Избегавајте да радите сами.
• Будите опрезни када радите са волtagизнад 30V AC RMS, 42V вршне струје или 60V DC. Ови напониtagпредстављају опасност од удара.
• Always disconnect power to the circuit under test before making connections or disconnections, especially when measuring resistance, capacitance, or performing diode tests.
• The AP-570S-APP features a double insulation design for enhanced protection. However, always exercise caution.
• Тхе Нон-Цонтацт Волtage (NCV) detection feature allows for voltage detection without direct contact, improving safety.
• Replace the battery promptly when the low battery indicator appears to ensure accurate readings and proper operation.

Image 2.1: The clamp meter with a rubber sleeve for protection against drops and emphasizing safety features like double insulation.

3. Карактеристике производа

• Multifunction Measurement: Accurately measures AC/DC Voltage (600mV-1000V), AC/DC Current (600A-1000A), Resistance (600Ω-60MΩ), Capacitance (6nF-60mF), Frequency (9.999Hz-9.999MHz), Duty Cycle, Diode, and Continuity.
• Bluetooth APP Connectivity: Connects to mobile phones (Android/iOS) via Bluetooth for real-time data display, logging, and analysis using the "AiLink" app.
• Мерење температуре: Includes a thermocouple for temperature testing, with switchable units (℃/℉).
• Нон-Цонтацт ВолtagДетекција е (НЦВ): Безбедно детектује јачину звука наизменичне струјеtage without direct contact, indicated by sound and light.
• Дисплеј са позадинским осветљењем: Large LCD with backlight for clear readings in dark environments.
• Задржавање података: Замрзава тренутно очитавање на екрану.
• Функција МАКС/МИН: Records maximum and minimum measured values.
• REL (Relative) Mode: Measures the change in a signal relative to a stored reference value.
• Auto/Manual Ranging: Offers flexibility in measurement ranges.
• Double Insulation Design: Provides enhanced user safety.
• Аутоматско искључивање: Штеди трајање батерије.

4. Layout Introduction (Components)

Familiarize yourself with the different parts of your AOPUTTRIVER AP-570S-APP Clamp метар:

Image 4.1: Detailed diagram showing the layout and functions of the clamp meter's various parts.

1. Clamp чељусти: Opens up to 45mm to enclose a conductor for current measurement.
2. NCV Detection Area: Простор за бесконтактни волумtagе детекција.
3. Jaw-Opening Handle: Користи се за отварање и затварање цлamp чељуст.
4. Ротациони прекидач: Selects measurement functions and ranges.
5. ХОЛД тастер: Press to hold the current reading. Press and hold for more than 2 seconds to activate/deactivate backlight.
6. Тастер SELECT: Used to switch between functions within a rotary switch position (e.g., AC/DC voltage, diode/continuity, capacitance).
7. MAX/MIN Key: Press to display the maximum or minimum measured value. Press and hold for 2 seconds to exit.
8. REL Key: Активира режим релативног мерења.
9. Hz/Duty Key: In ACV/ACA or Hz range, press to choose between Frequency (Hz) or Duty Cycle measurement.
10. ЛЦД екран: 6000 counts digital display with full function symbols.
11. ЦОМ улазни прикључак: Заједнички (негативни) улаз за мерне каблове.
12. VΩHzT+ Input Jack: Позитиван унос за запреминуtage, resistance, frequency, temperature, and capacitance measurements.

5. Подешавање

5.1 Инсталација батерије

The AP-570S-APP requires a 9V battery for operation. To install or replace the battery:

1. Осигурајте да цлamp meter is turned OFF (Rotary Switch set to OFF).
2. Пронађите поклопац одељка за батерије на задњој страни мерача.
3. Користите шрафцигер да отворите одељак за батерије.
4. Connect the 9V battery to the battery clips, observing correct polarity.
5. Place the battery into the compartment and secure the cover.

5.2 Почетно укључивање

After battery installation, turn the Rotary Switch from OFF to any desired measurement function to power on the device. The LCD display will illuminate.

Image 5.1: The clamp meter shown with its packaging, carrying bag, test leads, thermocouple, and 9V battery.

6. Упутство за употребу

To perform measurements, rotate the Rotary Switch to the desired function. Connect test leads or use the clamp jaws as appropriate for the measurement type.

6.1 Мерење наизменичне/једносмерне струје

1. Set the Rotary Switch to the 600А~1000А положај.
2. Притисните тастер СЕЛЕЦТ key to switch between AC (~) and DC (—) current measurement if necessary.
3. Отворите цлamp jaws using the jaw-opening handle.
4. Enclose only one conductor with the clamp jaws. Ensure the conductor is centered within the jaws for accurate readings.
5. Прочитајте тренутну вредност на ЛЦД екрану.

Note: For currents between 0-600A, resolution is 0.1A. For 600-1000A, resolution is 1.0A.

6.2 АЦ/ДЦ Волtagе Мерење

1. Set the Rotary Switch to the В— or V~ положај.
2. Притисните тастер СЕЛЕЦТ key to switch between AC (~) and DC (—) voltagмерење ако је потребно.
3. Уметните црни тест кабл у ЦОМ прикључак и црвени испитни кабл у VΩHzT+ Јацк.
4. Повежите мерне сонде преко кола или компоненте коју треба мерити.
5. Прочитајте књtagе вредност на ЛЦД екрану.

6.3 Resistance, Diode, Continuity, and Capacitance Measurement

1. Set the Rotary Switch to the Ω положај.
2. Притисните тастер СЕЛЕЦТ key to cycle through Resistance (Ω), Diode Test (→|), Continuity Test (♫), and Capacitance (—||—) functions.
3. Уметните црни тест кабл у ЦОМ прикључак и црвени испитни кабл у VΩHzT+ Јацк.
4. Connect the test probes to the component.
5. Read the value on the LCD display. For continuity, an audible beep indicates a continuous circuit.

6.4 Мерење фреквенције и радног циклуса

1. Set the Rotary Switch to the Hz положај.
2. Уметните црни тест кабл у ЦОМ прикључак и црвени испитни кабл у VΩHzT+ Јацк.
3. Connect the test probes to the signal source.
4. Притисните тастер Хз/Дути key to switch between Frequency (Hz) and Duty Cycle (%).
5. Очитајте вредност на ЛЦД екрану.

6.5 Мерење температуре

1. Set the Rotary Switch to the ° Ц/° Ф положај.
2. Insert the thermocouple into the ЦОМ и VΩHzT+ утичнице, поштујући поларитет.
3. Place the thermocouple probe at the point where temperature is to be measured.
4. Притисните тастер СЕЛЕЦТ key to switch between Celsius (°C) and Fahrenheit (°F).
5. Очитајте вредност температуре на ЛЦД екрану.

Image 6.1: The clamp meter displaying temperature readings in both Celsius and Fahrenheit, with a thermocouple probe immersed in water.

6.6 Нон-Цонтацт Волtagе (НЦВ) Детекција

1. Set the Rotary Switch to the НЦВ положај.
2. Move the NCV detection area of the meter close to the wire or conductor where voltagсумња се на е.
3. Ako AC voltage is detected, the meter will emit an audible beep and the NCV indicator light will illuminate.

Image 6.2: The clamp мерач који детектује бесконтактну запреминуtage near an electrical outlet, indicated by a red glow and 'bi bi' sound representation.

6.7 Функција позадинског осветљења

To activate or deactivate the backlight, press and hold the ХОЛД button for more than 2 seconds. The backlight improves visibility in dimly lit conditions.

Image 6.3: Comparison of the clamp meter's LCD display, showing improved readability with the backlight activated.

7. Bluetooth APP Connection

The AP-570S-APP can connect to your mobile device via Bluetooth for enhanced functionality, including data logging and analysis.

1. Преузмите апликацију: Scan the QR code below or search for "AiLink" in the Google Play Store (for Android) or Apple App Store (for iOS). Download and install the application.
2. Региструј се/Пријави се: Open the AiLink app. You may need to register a new account or log in using an existing account (e.g., Facebook or Apple ID).
3. Повежите Цлamp метар: Ensure Bluetooth is enabled on your mobile phone. In the AiLink app, press the "ADD" or "+" button to search for nearby devices. Select the clamp meter from the list to connect.
4. Start Measurement and Analysis: Када се повежете, можете view real-time data, save measurements, and analyze them within the app. The app allows for data export (e.g., CSV fileс).

Image 7.1: Visual guide demonstrating the steps to download the AiLink app, log in, connect to the clamp meter, and view података.

Download AiLink App: https://aicare.net.cn/app/ailink/download/

8. Одржавање

• Чишћење: Regularly wipe the meter casinг са огласомamp krpom i blagim deterdžentom. Ne koristite abrazivna sredstva ili rastvarače.
• Замена батерије: Replace the 9V battery when the low battery indicator appears on the display. Always turn off the meter before replacing the battery.
• Складиштење: If the meter is not used for an extended period, remove the battery to prevent leakage. Store the meter in a cool, dry place, away from direct sunlight and extreme temperatures.
• калибрација: For professional use, periodic calibration by a qualified technician is recommended to ensure continued accuracy.

КСНУМКС. Решавање проблема

10. Спецификације

11. Гаранција и подршка

AOPUTTRIVER products are designed for reliability and performance. For warranty information or technical support, please refer to the documentation included with your purchase or contact AOPUTTRIVER customer service directly. If you have questions about the product during daily use, please contact us for assistance.