POTTER PSN-106B 10 AMP 6 NAC Power Supply User Manual

1. Увод

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the POTTER PSN-106B 10 AMP 6 NAC Power Supply. Please read this manual thoroughly before attempting to install or operate the unit. Retain this manual for future reference.

Figure 1: POTTER PSN-106B 10 AMP 6 NAC Power Supply. This image shows the front view of the power supply, highlighting its black casing and the layout of its connection terminals and status indicators.

2. Безбедносне информације

УПОЗОРЕЊЕ: Installation and servicing must be performed by qualified personnel only. Disconnect all power sources before servicing to prevent electric shock or equipment damage.

• Увек се придржавајте локалних и националних електричних прописа.
• Осигурајте правилно уземљење јединице.
• Не излажите уређај влази или екстремним температурама.
• Провери унос волtage and current ratings before connecting to a power source.

3. Производ је готовview

The POTTER PSN-106B is a 10 AMP, 6 NAC (Notification Appliance Circuit) power supply designed for fire alarm and security applications. It provides regulated and filtered power to connected devices.

Кључне карактеристике:

• 10 Amp total output current.
• Six independently supervised Notification Appliance Circuits (NACs).
• Built-in battery charger for standby power.
• Fault monitoring and reporting capabilities.

4. Подешавање и инсталација

4.1 Монтажа јединице

1. Select a suitable location that is clean, dry, and free from excessive vibration or heat.
2. Mount the power supply securely to a wall or other stable surface using appropriate fasteners. Ensure adequate ventilation around the unit.

4.2 Ожичење

Refer to the wiring diagram provided inside the unit's enclosure for specific connection points. All wiring must comply with NFPA 70 (National Electrical Code) and NFPA 72 (National Fire Alarm and Signaling Code).

• Улаз наизменичне струје: Connect the main AC power source to the designated terminals. Ensure the power source matches the unit's voltagе захтеве.
• Прикључци батерије: Connect standby batteries to the battery terminals, observing correct polarity. Batteries are essential for maintaining power during AC failures.
• NAC Outputs: Connect notification appliances (horns, strobes, etc.) to the NAC terminals. Each NAC is supervised for open and short circuits.
• Помоћни излази: Connect auxiliary devices requiring regulated power to the auxiliary power terminals.
• Trouble/Supervisory Relays: Connect these outputs to the main fire alarm control panel (FACP) for remote fault reporting.

5. Упутство за употребу

5.1 Почетно укључивање

1. After all wiring is complete and verified, apply AC power to the unit.
2. Observe the status indicators. The AC POWER LED should illuminate steadily.
3. If batteries are connected, the BATTERY CHARGE LED should indicate charging status.

5.2 Индикатори статуса

6. Одржавање

Regular maintenance ensures the reliable operation of your PSN-106B power supply. All maintenance should be performed by qualified personnel.

• месечно: Inspect the unit for any visible damage. Verify all status indicators are normal.
• Годишње: Тест волtage and capacity. Replace batteries as recommended by the manufacturer (typically every 3-5 years). Clean any dust accumulation from the enclosure and ventilation openings.
• Вођење евиденције: Maintain a log of all inspections, tests, and maintenance performed.

КСНУМКС. Решавање проблема

If the unit exhibits abnormal behavior, refer to the following table before contacting technical support.

8. Спецификације

9. Гаранција и техничка подршка

For warranty information, please refer to the documentation included with your purchase or visit the official POTTER website. For technical assistance, contact POTTER customer support. Ensure you have your model number (PSN-106B) and purchase details available when contacting support.

Произвођач: ПОТТЕР

Web: ввв.поттерсигнал.цом (Прampлинк, стварни линк може да варира)