EDECOA 3500W-24V

EDECOA 24V 3500W Pure Sine Wave Power Inverter

Model: 3500W-24V

Увод

This manual provides essential information for the safe and efficient operation of your EDECOA 24 Volt 3500 Watt Pure Sine Wave Power Inverter. This inverter converts 24V DC battery power into 110V/120V AC household electricity, suitable for various applications including vehicles, camping, and off-grid systems. Please read this manual thoroughly before installation and use.

Безбедносна упутства

Садржај пакета

Приликом распакивања, проверите да ли су сви предмети присутни и да ли су неоштећени:

Производ је завршенview

The EDECOA 3500W Pure Sine Wave Power Inverter features a robust design for reliable power conversion. Key components and features include:

Front Panel and LCD Display

Front panel of the EDECOA 3500W inverter showing the LCD display, four AC outlets, and hardwire terminal.

Figure 1: Front Panel with LCD Display and Output Terminals

ЛЦД екран пружа информације у реалном времену:

Задња плоча и прикључци

Rear panel of the EDECOA 3500W inverter showing 24VDC input terminals and cooling fans.

Figure 2: Rear Panel with DC Input and Cooling Fans

The rear panel includes the 24VDC input terminals (positive and negative) and cooling fans. The front panel also features the main ON/OFF switch and the remote controller port.

Даљински управљач

EDECOA remote controller with ON/OFF switch, battery capacity indicator, and low input voltagе упозорење.

Слика 3: Даљински управљач

The remote controller allows you to switch the inverter ON or OFF, monitor battery capacity, and receive low input voltage warnings from a distance.

Подешавање и инсталација

Proper installation is crucial for the inverter's performance and safety.

  1. Монтажа: Choose a dry, cool, and well-ventilated location. Ensure sufficient space around the inverter for airflow, especially around the cooling fans.
  2. уземљење: Connect the inverter's grounding terminal to a reliable earth ground using the provided ground wire.
  3. ДЦ улазна веза:
    • Connect the red battery cable to the positive (+) terminal of your 24V battery bank and the positive (+) input terminal on the inverter.
    • Connect the black battery cable to the negative (-) terminal of your 24V battery bank and the negative (-) input terminal on the inverter.
    • Ensure connections are tight and secure. Incorrect polarity will damage the inverter.
  4. Прикључак на излаз наизменичне струје:
    • For appliances under 1800 watts, use the 4 AC outlets.
    • For appliances requiring up to 3500 watts, use the hardwire terminal. Consult a qualified electrician for hardwire connections.
    Детаљно view of the EDECOA inverter's AC outlets and hardwire terminal, indicating power ratings.

    Figure 4: AC Outlets and Hardwire Terminal Usage

  5. Remote Controller Connection: Plug the RJ45 cable from the remote controller into the designated remote port on the inverter's front panel.

Упутство за употребу

  1. Укључено: After all connections are secure, switch the main ON/OFF button on the inverter to the 'ON' position. Alternatively, use the remote controller to turn the inverter on. The LCD display will illuminate, showing current status.
  2. Повежите уређаје: Plug your AC appliances into the inverter's outlets or connect them via the hardwire terminal. Ensure the total wattage of connected appliances does not exceed 3500 Watts.
  3. Дисплеј монитора: Regularly check the LCD display for battery voltage, output power, and any warning indicators.
  4. Искључивање: When finished, first turn off all connected appliances, then switch the inverter's main ON/OFF button (or remote) to the 'OFF' position.

Одржавање

Решавање проблема

ПроблемМогући узрокРешење
Инвертор се не укључујеЛабави контакти батерије, низак ниво напуњености батеријеtage, blown fuses, faulty ON/OFF switch.Проверите везе каблова батерије. Уверите се да је батерија напуњена.tage is above 21V. Inspect and replace internal fuses if necessary (consult professional). Verify main ON/OFF switch functionality.
Нема излаза наизменичне струјеOverload, short circuit, high temperature, low battery voltage.Reduce connected load. Check for short circuits in appliances/wiring. Allow inverter to cool down. Recharge or replace battery.
LCD display blank or not workingPower issue, display fault.Check power connections. If inverter is working but display is blank, contact support.
Cooling fans are noisyHigh load, high internal temperature.This is normal operation under heavy load or high ambient temperatures. Ensure proper ventilation.
Даљински управљач не радиLoose RJ45 cable, faulty remote.Ensure the RJ45 cable is securely connected at both ends. Test with a known working RJ45 cable if available.

Спецификације

ФеатуреСпецификација
Број моделаКСНУМКСВ-КСНУМКСВ
Улазни волtageДЦ 24В
Оутпут ВолtageНаизменична струја 110V / 120V
Цонтинуоус Повер3500 Ваттс
Пеак Повер7000 Watts (<10ms)
Оутпут ВавеформЧисти синусни талас
АЦ утичнице4 US Sockets
Hardwire Terminal1
ДисплаиЛЦД
Ремоте ЦонтролYes, with 4-meter cable
Димензије производаПриближно 9.5 к 14.6 к 6.3 инча (24 к 37 к 16 цм)
Тежина артикла15.62 фунти
Систем за хлађењеIntelligent Fan Control (IFC)

Могуће употребе

This EDECOA Pure Sine Wave Power Inverter is designed for a wide range of applications where grid power is unavailable or inconvenient:

Collage showing various applications of the inverter: travel (van), work (laptop), entertainment (gaming), and household (vacuum cleaner).

Figure 5: Versatile Applications of the Power Inverter

Гаранција и подршка

EDECOA products typically come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact EDECOA directly. If you encounter issues or require technical assistance, it is recommended to reach out to the manufacturer's customer support channels. Please note that support availability and response times may vary.