LEDONE Упутство за употребу даљинског управљача

1. Увод

This manual provides comprehensive instructions for the LEDONE Remote Control, designed for use with Motion Detection, UFO High Bay, Parking Lot Light, and Linear High Bay Lights (specifically HD406VRH Sensor compatible). This remote enhances convenience and control over your lighting systems, allowing for customization of various settings to optimize performance and energy efficiency in commercial spaces.

2. Карактеристике производа

• Direct control over LED high bay light processes.
• Four pre-programmed fixed scene modes for automatic settings.
• Controls UFO High Bay lights and integrated motion detection sensors.
• Customizable brightness and motion sensor settings.
• Includes essential functions: On/Off, Auto mode, and Reset for straightforward operation.

3. Подешавање

3.1 Инсталација батерије

The LEDONE Remote Control requires 'A' type batteries (not included). To install:

1. Пронађите поклопац одељка за батерије на задњој страни даљинског управљача.
2. Отворите поклопац у смеру стрелице.
3. Insert the 'A' batteries, ensuring correct polarity (+ and -) as marked inside the compartment.
4. Вратите поклопац одељка за батерију док не кликне чврсто на своје место.

3.2 Почетно повезивање

The remote control is designed to work seamlessly with compatible LEDONE UFO High Bay and Linear High Bay Lights equipped with HD406VRH sensors. No complex pairing is typically required; the remote should function upon battery installation and being within range of the compatible light fixture.

4. Упутство за употребу

Упознајте се са распоредом даљинског управљача:

Figure 1: LEDONE Remote Control Layout

4.1 Основне функције

• УКЉУЧЕНО/ИСКЉУЧЕНО: Press to toggle the connected light fixture on or off.
• Аутоматски режим: Activates the automatic operation mode, utilizing the sensor's default or previously set parameters.
• Ресетовати: Resets all settings on the connected light fixture to their factory default values.
• Brightness (+/-): Adjusts the light output intensity.

4.2 Напредне поставке

The remote allows for precise customization of sensor and lighting parameters:

• Почетак: Initiates the application of selected settings.
• Меморија: Saves the current custom settings for quick recall.
• Пријавите се: Applies the settings stored in memory or the currently selected custom settings.

Домет детекције

Select the desired motion detection sensitivity:

• 25%, 50%, 75%, 100%: Choose the percentage of the sensor's maximum detection range.

Холд Тиме

Sets the duration the light remains at full brightness after motion is detected and before dimming or turning off:

• 5s, 30s, 1min, 3min, 5min, 10min, 15min, 30min: Select the hold time in seconds or minutes.

Ниво затамњења у стању приправности

Determines the light output level during the stand-by period (after hold time and before turning off):

• 10%, 20%, 30%, 50%: Set the dimming percentage.

Станд-би Период

Sets the duration the light remains at the stand-by dimming level before turning off completely:

• 0s, 10s, 30s, 1min, 5min, 10min, 30min, +∞: Select the stand-by period. '+∞' indicates the light will remain at the stand-by dimming level indefinitely.

Сензор дневне светлости

Configures the ambient light threshold at which the motion sensor will activate the light:

• 2Lux, 10Lux, 30Lux, 50Lux, 80Lux, 120Lux: Light will only turn on if ambient light is below the selected Lux level.
• Онемогући: The daylight sensor is deactivated, and the light will respond to motion regardless of ambient light.

Тест (2с)

Activates a 2-second test mode to verify sensor functionality and current settings.

5. Одржавање

To ensure optimal performance and longevity of your LEDONE Remote Control:

• Чишћење: Обришите даљински управљач меком, сувом крпом. Не користите абразивна средства за чишћење или раствараче.
• Замена батерије: Replace batteries when the remote's response becomes sluggish or inconsistent. Always use new 'A' type batteries.
• Складиштење: Даљински управљач чувајте на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура.
• Избегавајте влагу: Do not expose the remote to water or high humidity.

КСНУМКС. Решавање проблема

If you encounter issues with your LEDONE Remote Control, refer to the following common problems and solutions:

• Даљински не реагује:
  • Проверите инсталирање батерије и замените батерије ако је потребно.
  • Ensure there are no obstructions between the remote and the light fixture's sensor.
  • Verify that the light fixture is powered on and functioning correctly.
• Settings not applying:
  • Ensure you are pressing the 'Apply' or 'Start' button after making changes.
  • Confirm the remote is within effective range of the light fixture.
  • Try resetting the light fixture using the 'Reset' button on the remote, then re-apply settings.
• Ограничен домет:
  • Замените батерије новим.
  • Ensure no strong interference sources (e.g., other wireless devices) are nearby.

7. Спецификације

8. Гаранција и подршка

LEDONE is committed to providing quality lighting solutions and customer satisfaction. Our products are designed for optimal performance and safety. For any inquiries, technical assistance, or warranty information, please contact LEDONE customer service. LEDONE is based in California, offering worry-free services for our products.