Упутство за употребу бежичне механичке тастатуре Keychron K6 Pro QMK/VIA

Увод

The Keychron K6 Pro is a custom wireless mechanical keyboard designed for an enhanced typing experience. It features QMK/VIA compatibility for extensive customization, hot-swappable switches, and a robust aluminum frame. This manual provides instructions for setting up, operating, and maintaining your K6 Pro keyboard.

1. Подешавање

1.1 Распакивање и садржај пакета

Carefully unpack your Keychron K6 Pro keyboard. Verify that all components are present:

• 1к потпуно састављена тастатура
• 1к кабл типа-А до типа-Ц
• Mac and Windows Keycaps
• 1к извлакач за кључеве
• 1к Скидач прекидача
• 1к хексадецимални кључ
• 1x Screwdriver (located at the bottom of the box)
• 1к челична плоча
• 1к пена која апсорбује звук
• 1к силиконски доњи јастучић
• 4 Sets of Stabilizers (PCB Screw-In)
• 1 Set of Keycaps (Double-Shot PBT)
• 1 Set of Switches (Keychron K Pro)

Note: All tools are placed on the bottom of the box.

Image: Contents of the Keychron K6 Pro box, showing the keyboard, USB-C cable, keycap and switch pullers, and other accessories.

1.2 Режими повезивања

The K6 Pro supports both wireless (Bluetooth 5.1) and wired (USB-C) connections.

Блуетоотх веза:

1. Ensure the keyboard's mode switch (located on the side) is set to Bluetooth.
2. On your device (laptop, phone, tablet), enable Bluetooth and search for "Keychron K6 Pro".
3. Select the keyboard to pair. The K6 Pro can connect to up to 3 devices wirelessly. Switch between paired devices using the appropriate key combinations (refer to the Operating section).

Image: The Keychron K6 Pro keyboard shown connected to a smartphone, tablet, and laptop via Bluetooth, demonstrating multi-device connectivity.

Жична веза:

Connect the keyboard to your computer using the provided USB-C cable. The keyboard will automatically switch to wired mode.

1.3 Компатибилност оперативног система

The K6 Pro is compatible with macOS, Windows, and Linux operating systems. Use the OS switch located on the side of the keyboard to select the correct operating system mode for optimal functionality.

Image: A close-up of the Keychron K6 Pro keyboard's side, showing the physical switch to toggle between Windows and macOS modes.

1.4 Adjustable Typing Angle

The keyboard features adjustable feet to set your preferred typing angle. You can choose between 3.5°, 8.5°, and 12° angles for ergonomic comfort.

Слика: Сајд професионалацfile of the Keychron K6 Pro keyboard, illustrating its adjustable feet that allow for different typing angles.

2. Управљање тастатуром

2.1 Key Remapping with QMK/VIA Launcher

The K6 Pro supports QMK/VIA firmware, allowing for comprehensive key remapping and macro creation. Use the VIA web application (Launcher) to customize your keyboard layout.

1. Connect the K6 Pro to your device via USB-C cable.
2. Access the VIA web application (search for "Keychron VIA Launcher").
3. Drag and drop keys or macros to remap any key. Changes made in wired mode will apply to both wired and wireless modes.

Image: Screenshot of the QMK/VIA Launcher interface, demonstrating how to remap individual keys and program macro commands on the Keychron K6 Pro.

2.2 Прекидачи са могућношћу замене током рада

The K6 Pro features hot-swappable sockets, allowing you to change mechanical switches without soldering. It is compatible with most 3-pin and 5-pin MX mechanical switches.

1. Use the provided switch puller to carefully remove a keycap, then the switch.
2. Align the pins of the new switch with the sockets on the PCB.
3. Gently press the new switch into place until it clicks.
4. Замените поклопац тастера.

Image: A close-up of the Keychron K6 Pro keyboard with several keycaps and switches removed, illustrating the hot-swappable feature for easy switch replacement.

Image: A close-up of Keychron K Pro Red switches installed on the keyboard, illuminated by RGB backlighting.

2.3 RGB контрола позадинског осветљења

The keyboard features RGB backlighting with various effects. Control the backlight settings using specific key combinations (refer to the Key Combinations table below).

Video: An official Keychron video demonstrating the RGB backlighting effects and customization options of the K6 Pro keyboard.

2.4 Key Combinations (Fn1/Fn2)

The K6 Pro utilizes Fn1 and Fn2 keys for various functions and media controls. Refer to the following tables for common key combinations:

Image: A detailed chart illustrating the various key combinations using Fn1 and Fn2 keys on the Keychron K6 Pro, including multimedia controls and backlight adjustments.

3. Одржавање

3.1 Чишћење тастатуре

Да бисте одржали оптималне перформансе и изглед, редовно чистите тастатуру:

• Уклањање прашине: Користите компримовани ваздух да уклоните прашину и остатке између тастера.
• Чишћење капица тастера: Remove keycaps using the provided keycap puller. Clean them with a mild soap solution and a soft cloth, then dry thoroughly before reattaching.
• Чишћење површине: Wipe the keyboard surface with a damp, крпа која не оставља влакна. Избегавајте прекомерну влагу.

3.2 Switch Replacement

As detailed in section 2.2, switches can be replaced without soldering. If a switch malfunctions, use the switch puller to remove it and insert a new, compatible switch.

КСНУМКС. Решавање проблема

If you encounter issues with your Keychron K6 Pro, refer to the following common solutions:

• Keyboard Not Connecting (Bluetooth):
  • Ensure the keyboard is in Bluetooth mode and fully charged.
  • Delete the keyboard from your device's Bluetooth list and attempt to re-pair.
  • Покушајте да се повежете са другим уређајем да бисте искључили проблеме специфичне за уређај.
• Тастери не реагују:
  • Check if the keyboard is in the correct OS mode (Mac/Windows).
  • If using a wired connection, ensure the USB-C cable is securely connected.
  • For individual keys, consider replacing the switch as it may be faulty (refer to section 3.2).
• Проблеми са позадинским осветљењем:
  • Ensure the backlight is not turned off or set to a very low brightness level using the Fn key combinations.
  • If specific LEDs are not working, it may indicate a hardware issue.
• QMK/VIA Remapping Not Working:
  • Ensure the keyboard is connected via USB-C cable when attempting to remap keys using the VIA Launcher.
  • Verify that the VIA software is up-to-date.

5. Спецификације

6. Гаранција и подршка

For warranty information and technical support, please refer to the official Keychron webсајт или директно контактирајте њихову корисничку службу. Сачувајте доказ о куповини за потребе гаранције.

Official Keychron Webсајт: ввв.кеицһрон.цом