Јахитек 610818

Yaheetech 5-Tier Steel Storage Rack (90x45x180cm, Blue) - Instruction Manual

Модел: 610818

Yaheetech 5-Tier Steel Storage Rack in blue

Image: Yaheetech 5-Tier Steel Storage Rack, blue finish, with five shelves.

1. Безбедносне информације

Молимо вас да прочитате и разумете сва упутства пре склапања и коришћења овог производа. Непоштовање ових упутстава може довести до повреда или оштећења производа.

  • Капацитет тежине: Each shelf has a maximum load capacity of 265 kg (evenly distributed). Do not exceed this limit.
  • Правилна монтажа: Ensure all components are securely fitted and hammered into place during assembly. A rubber mallet (not included) is recommended for secure connections.
  • Стабилност: For enhanced stability and safety, especially in areas with children or pets, it is highly recommended to secure the shelving unit to a wall using an anti-tip kit (not included).
  • Пласман: Place the unit on a flat, stable, and level surface. Avoid placing it in high-traffic areas where it could be easily bumped.
  • Оштре ивице: While edges are designed to be smooth, wear protective gloves during assembly to prevent cuts or pinches.
  • деца: Не дозволите деци да се пењу на полицу или да се играју са њом.

2. Списак делова

Before starting assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.

СтавкаОписКоличина
Vertical Posts (Long)Main support beams for height8
Horizontal Beams (Long)Front and back supports for shelves10
Horizontal Beams (Short)Side supports for shelves10
MDF BoardsShelf surfaces5
Цорнер ПротецторсPlastic caps for post ends16
Спојне плочеConnects vertical posts for full height4
РукавицеFor hand protection during assembly1 пар
Руббер МаллетRecommended for secure assembly (not included)1
All components of the Yaheetech 5-Tier Steel Rack including posts, beams, MDF boards, and corner protectors.

Слика: Прекоview of all parts included for the Yaheetech 5-Tier Steel Rack assembly.

3. Подешавање и монтажа

Follow these steps carefully to assemble your Yaheetech 5-Tier Steel Storage Rack. It is recommended to wear the provided gloves during assembly.

Корак 1: Саставите основни оквир

  1. Attach the corner protectors to the bottom ends of four long vertical posts. Ensure the large opening faces up and the small opening faces down.
  2. Connect two long horizontal beams and two short horizontal beams to form a rectangular base. Use a rubber mallet to gently tap the connections until they are secure. Ensure the wider side of the beams faces upwards.

Video: Demonstrates the initial steps of assembling the base frame and attaching the vertical posts.

Step 2: Install the First Shelf

  1. Place one MDF board onto the assembled base frame. Ensure it sits flush within the frame.

Step 3: Extend Vertical Posts and Add Middle Shelves

  1. Attach the remaining vertical posts to the top of the existing posts using the coupling plates. Tap gently with a rubber mallet to secure.
  2. Repeat the process of creating horizontal frames (two long, two short beams) and placing MDF boards for the middle shelves. Ensure the wider side of the beams faces upwards and connections are secure.

Video: Shows the process of extending the vertical posts and adding subsequent shelves.

Step 4: Complete the Top Section

  1. Assemble the final horizontal frame for the top shelf.
  2. Place the last MDF board onto the top frame.
  3. Install the remaining corner protectors on the very top ends of the vertical posts.
Diagram showing how to adjust shelf height and reconfigure the rack into two smaller units.

Image: Illustrates the flexibility of the rack, allowing for adjustable shelf heights and conversion into two smaller units.

4. Упутство за употребу

Your Yaheetech Steel Storage Rack is designed for versatile storage. Here are some guidelines for optimal use:

  • Учитавање ставки: Distribute weight evenly across each shelf to maintain stability and prevent warping. Place heavier items on lower shelves.
  • Подешавање висине полице: The shelves are adjustable. To change a shelf's height, carefully remove the items, then use a rubber mallet to gently tap the horizontal beams upwards to disengage them from the vertical posts. Reattach them at the desired height and tap firmly to secure.
  • Reconfiguration: The rack can be separated into two smaller, independent units (e.g., two 2-tier or 3-tier units) by using the coupling plates to create new top sections.
  • Разноврсна употреба: This rack is suitable for various environments such as kitchens, garages, warehouses, basements, workshops, offices, bedrooms, and living rooms.
Yaheetech 5-Tier Steel Rack used in a living room setting, holding books, decorative items, and storage boxes.

Image: The rack organized with various household items in a living room.

5. Одржавање и њега

To ensure the longevity and appearance of your steel storage rack, follow these maintenance tips:

  • Чишћење: Wipe down the steel frame and MDF boards with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the coating.
  • Спречавање рђе: The rack features a rust-resistant coating. To maintain this, avoid prolonged exposure to excessive moisture. Promptly wipe away any spills.
  • инспекција: Periodically check all connections to ensure they remain secure. Re-tap with a rubber mallet if any looseness is detected.
  • Избегавајте огреботине: The smooth edges help prevent scratches, but avoid dragging sharp or heavy objects across the frame or shelves.

КСНУМКС. Решавање проблема

Ако наиђете на било какве проблеме током склапања или употребе, погледајте следећа уобичајена решења:

  • Wobbly Rack: Ensure all horizontal beams are fully seated into the keyhole slots on the vertical posts. Use a rubber mallet to firmly tap all connections until they are flush and secure. Check that the unit is on a level surface.
  • Потешкоће при склапању: If parts are difficult to fit, ensure they are oriented correctly (e.g., wider side of beams facing up). A rubber mallet is essential for securing the screwless connections. Do not force parts; re-check alignment.
  • Јак мирис: Some users have reported an initial odor from the MDF boards. This is typically temporary. Ensure good ventilation in the area where the rack is assembled for a few days.
  • MDF Board Not Fitting: Ensure the horizontal beams are correctly installed and fully seated. The MDF board should rest securely on the inner lip of the beams.

7. Спецификације

ФеатуреДетаљ
БрандИахеетецх
Број модела610818 Плава
Димензије производа90 к 45 к 180 цм (ширина к дубина к висина)
Тежина производа22.8 кг
БојаПлава
МатеријалStainless Steel, Alloy Steel, Metal, MDF Board
Тип полице5 нивоа
Носивост по полици265 kg (evenly distributed)
Посебне карактеристикеDurable, Lightweight, Non-slip, Large Capacity, Comfortable, Sturdy, High Quality, Rust-proof
Diagram showing the dimensions of the 5-tier rack (180cm height, 90cm width, 45cm depth) and load capacity per shelf (265kg).

Image: Detailed dimensions and load capacity of the 5-tier rack.

Close-up of MDF board, non-slip feet, and screwless assembly mechanism.

Image: Highlights key features like high-quality MDF, non-slip feet, and the screwless assembly design.

8. Гаранција и подршка

For warranty information or customer support, please refer to the documentation included with your product or contact Yaheetech customer service directly. Details are typically available on the manufacturer's official webсајту или преко вашег места куповине.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.