Велго 7.5 инча велики дигитални будилник - упутство за употребу

Увод

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Welgo 7.5 Inch Large Digital Alarm Clock. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Кључне карактеристике

• Large 7.5-inch LED Display: Features bold, multi-color digits for enhanced visibility, suitable for all ages.
• 0-100% Dimmable Display: Adjustable brightness via a roll wheel, allowing customization for day or night viewing without disturbance.
• Adjustable Alarm Volume (30-90 dB): Customize alarm loudness to personal preference.
• Функција лаког одлагања: A touch-activated snooze button on top provides an additional 10 minutes of sleep.
• УСБ пуњач: Includes one extra USB port for convenient charging of external devices.
• Напаја се наизменичном струјом са резервном батеријом: Operates via outlet power, with 2 AAA batteries (not included) preserving settings during power outagес.

Садржај пакета

• 1x Welgo Digital Alarm Clock
• 1x USB Cable (5.9 inches)
• 1x USB адаптер
• 1к упутство за употребу

Сетуп

1. Прикључак за напајање: Connect the provided USB cable to the alarm clock and the USB adapter. Plug the adapter into a standard electrical outlet. The clock display will illuminate.
2. Инсталација батерије (опционо резервна батерија): Open the battery compartment on the back of the clock. Insert 2 AAA batteries (not included), observing correct polarity (+/-). These batteries will preserve time and alarm settings during a power outage, but the display will not be active, and the alarm will not sound.
3. Почетно подешавање времена:
   • Press and hold the "TIME SET" button located on the back of the clock.
   • Use the "+" or "-" buttons to adjust the hour. Observe the AM/PM indicator.
   • Press "TIME SET" again to move to minute adjustment. Use "+" or "-" to set the minutes.
   • Press "TIME SET" once more to confirm and exit time setting mode.

Упутство за употребу

1. Подешавање аларма

1. Press and hold the "ALARM SET" button on the back of the clock.
2. Use the "+" or "-" buttons to adjust the alarm hour. Pay attention to the AM/PM indicator.
3. Press "ALARM SET" again to move to minute adjustment. Use "+" or "-" to set the alarm minutes.
4. Press "ALARM SET" once more to confirm and exit alarm setting mode. The alarm icon will appear on the display, indicating the alarm is active.

2. Turning Alarm On/Off

• To activate or deactivate the alarm, press the "AL ON/OFF" button on the back of the clock.
• When the alarm is active, the alarm bell icon will be visible on the display. When deactivated, the icon will disappear.

3. Функција одлагања

• When the alarm sounds, gently touch the large "SNOOZE" button located on the top of the clock.
• This will temporarily silence the alarm for 10 minutes. The alarm will sound again after 10 minutes. This can be repeated up to 7 times.
• To completely turn off the alarm after it sounds, press the "AL ON/OFF" button on the back.

4. Adjusting Display Brightness (Dimmer)

• Locate the "DIMMER" roll wheel on the back of the clock.
• Rotate the wheel to adjust the display brightness from 0% (off) to 100% (maximum brightness).

5. Подешавање јачине звука аларма

• Locate the "VOLUME" roll wheel on the back of the clock.
• Rotate the wheel to adjust the alarm volume between 30 dB and 90 dB.

6. УСБ порт за пуњење

• The clock features one USB charging port on the back.
• Connect your smartphone, tablet, or other USB-powered device to this port for charging.
• This port is active only when the alarm clock is connected to an AC power source.

Одржавање

• Чишћење: Wipe the clock surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Снага: Ensure the clock is always connected to a stable power source for optimal performance.
• Замена батерије: If using battery backup, replace AAA batteries annually or when the clock fails to retain settings during a power outage.

Решавање проблема

• Display is Off:
  • Ensure the clock is properly plugged into an active electrical outlet.
  • Check the dimmer setting; it might be set to 0%. Adjust the "DIMMER" roll wheel.
• Аларм се не оглашава:
  • Verify the alarm is activated by checking for the alarm bell icon on the display. If not present, press "AL ON/OFF".
  • Check the alarm volume setting using the "VOLUME" roll wheel.
  • Ensure the correct AM/PM is set for the alarm time.
• Подешавања су изгубљена након нестанка струјеtage:
  • Install 2 fresh AAA batteries for backup. The display will not light up during an outage, but settings will be retained.
• USB Charging Not Working:
  • Confirm the clock is plugged into an AC power source. The USB port does not function on battery backup alone.
  • Check the USB cable and the device being charged for proper connection.

Спецификације

Званични видео снимци производа

Гаранција и подршка

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Welgo webсајт. Сачувајте рачун као доказ о куповини.