Упутство за употребу дигиталног термометра CEM DT-8806

1. Увод

The CEM DT-8806 Digital Thermometer is a non-contact infrared thermometer designed for accurate and hygienic temperature measurement. It is suitable for use with adults, children, and infants, offering both body and surface temperature modes. This manual provides essential information for the safe and effective use of your device.

Кључне карактеристике:

• No-Contact Measurement: Reduces cross-infection risk.
• Dual Mode: Measures both body and surface temperatures.
• Fast Readings: Provides instant accuracy.
• Fever Alarm: Visual and audible alerts for high temperatures.
• Memory Recall: Stores up to 32 temperature readings.
• Switchable Units: Easily switch between Fahrenheit (°F) and Celsius (°C).
• Large LCD Display: Clear readings day and night.

Слика 1: Завршеноview of CEM DT-8806 Key Features.

2. Компоненте производа

Your CEM DT-8806 Digital Thermometer package includes the following items:

• CEM DT-8806 Digital Thermometer Unit
• Кориснички приручник (овај документ)
• 2 к 1.5 В ААА батерије
• Carrying Case / Gift Box

Figure 2: Package Contents of the CEM DT-8806 Digital Thermometer.

3. Подешавање

3.1 Инсталација батерије

1. Locate the battery cover at the bottom of the thermometer handle.
2. Померите поклопац батерије надоле да бисте отворили одељак.
3. Уметните две батерије од 1.5 V AAA, водећи рачуна о исправном поларитету (+ и -).
4. Затворите поклопац батерије померањем нагоре док не кликне на своје место.

Note: If the low battery symbol appears on the display, replace the batteries promptly to ensure accurate readings.

Figure 3: Low Battery Indication on the Thermometer Display.

4. Упутство за употребу

4.1 Основни рад

1. Point the thermometer at the center of the forehead from a distance of 1cm to 5cm (0.39in to 2.0in).
2. Press the measurement trigger button to take a reading.
3. The temperature will be displayed on the LCD screen within 1 second.

Figure 4: Proper Measurement Distance for Non-Contact Forehead Temperature.

4.2 Mode Selection (Body / Surface)

The DT-8806 thermometer supports two measurement modes: Body Mode and Surface Mode. Press the МОДЕ дугме за пребацивање између ових режима.

• Режим тела: Used for measuring human body temperature. The display will show "Body".
• Режим површине: Used for measuring the surface temperature of objects, such as milk, bathwater, or room temperature. The display will show "Surface Temp".

Figure 5: Body Mode vs. Surface Mode Measurement Exampлес.

4.3 Temperature Unit Switching (°F / °C)

To switch between Fahrenheit (°F) and Celsius (°C), press and hold the МОДЕ button for approximately 3 seconds until the unit changes on the display.

Figure 6: Switching Between Fahrenheit and Celsius Temperature Units.

4.4 Меморијска функција

The thermometer can store up to 32 sets of temperature readings. To access the memory, press the UP or ДОВН buttons when the device is on. This allows you to track historical temperature changes.

Figure 7: Tracking Temperature Changes with the 32-Set Memory Function.

4.5 Fever Alarm

The thermometer features a fever alarm. If the measured body temperature exceeds the preset threshold (default is 38°C or 100.4°F), the display backlight will change color (e.g., to red) and an audible "didi" sound will be emitted to alert you of a potential fever.

4.6 Тихи режим

The thermometer can be switched to silent mode to avoid disturbing sleeping individuals, especially babies. Refer to the device's buttons for the specific sequence to activate/deactivate silent mode (often by pressing and holding the "Up" or "Down" button).

5. Одржавање

5.1 Чишћење

• Користите меку, суву крпу за чишћење тела термометра.
• For the infrared sensor lens, gently wipe with a cotton swab lightly moistened with alcohol. Do not use abrasive cleaners or immerse the device in water.
• Уверите се да је уређај потпуно сув пре складиштења или следеће употребе.

5.2 Складиштење

• Термометар чувајте на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура.
• If the thermometer will not be used for an extended period, remove the batteries to prevent leakage and damage to the device.

КСНУМКС. Решавање проблема

Погледајте табелу испод за уобичајене проблеме и њихова решења:

7. Спецификације

Figure 8: Approximate Dimensions of the CEM DT-8806 Thermometer.

8. Гаранција и подршка

For warranty information and technical support, please refer to the contact details provided on the product packaging or visit the official CEM Instrument webсајт. Сачувајте рачун као доказ о куповини за евентуалне рекламације по гаранцији.

CEM is committed to providing reliable products and customer satisfaction. If you encounter any issues not covered in this manual, please contact our customer service team for assistance.