RioRand PWM DC Motor Speed Controller (8-50V, 30A) User Manual

1. Производ је готовview

The RioRand PWM DC Motor Speed Controller is designed for precise speed control of brushed DC motors. It features adjustable overcurrent and delay protection, multiple control modes, and a wide voltage input range, making it suitable for various DIY projects and electric ride-on modifications.

Фронт view of the RioRand PWM DC Motor Speed Controller, highlighting the speed adjustment knob and terminal blocks for power and motor connections.

2. Безбедносне информације

This product is an electrical component. Please observe the following safety guidelines:

• Уверите се да је напајање волtage is within the specified range of 8V to 50V DC.
• Only connect to brushed DC motors. This controller is не compatible with brushless motors or AC power.
• Verify wiring polarity (positive and negative) before applying power to prevent damage to the unit and connected components.
• Do not exceed the maximum current rating of 30A. The default setting is 20A.
• Инсталирајте контролер у добро проветреном простору како бисте спречили прегревање.
• Чувати ван домашаја деце.

Failure to follow these instructions may result in electric shock, fire, or damage to the product.

3. Подешавање и инсталација

3.1 Дијаграм ожичења

Refer to the diagram below for correct wiring connections. Ensure all connections are secure before powering on the device.

Detailed wiring diagram showing connections for DC power input (P+, P-), motor output (M+, M-), and function keys (K1, K2).

3.2 Кораци повезивања

1. Connect DC Power Input: Connect your DC power source (8-50V DC) to the P+ (positive) and P- (negative) terminals.
2. Connect Motor Output: Connect your brushed DC motor to the M+ (positive) and M- (negative) terminals.
3. Optional Control Inputs: If using external control, connect the analog signal (0.2-4.8V) or Hall handle (1-4.2V) to the designated input pins (refer to advanced wiring diagrams if available).
4. Функцијски тастери: K1 (STOP) and K2 (SET) are used for configuration.

Illustration demonstrating how to connect the speed controller to a DC power source and a brushed DC motor.

3.3 Aplikacija prample

This controller is ideal for modifying children's electric ride-on toys or integrating into various DIY DC motor projects.

The speed controller shown on a workbench, suggesting its use for modifying children's electric ride-on vehicles and DIY projects.

4. Упутство за употребу

4.1 Speed Control Modes

The controller supports three methods for speed adjustment:

• On-board Knob Adjustment: Rotate the potentiometer knob on the controller for 0-100% smooth speed adjustment.
• 0.2-4.8V Analog Signal Control: Connect an external analog signal source for speed control.
• 1-4.2V Hall Handle Control: Use a Hall effect throttle handle for speed regulation.

Displays the speed controller along with a throttle handle, indicating the three control modes and recommended power limits.

4.2 Adjustable Overload Protection

The controller features adjustable overcurrent and delay protection to prevent damage from motor stalls or sudden current spikes.

• Current Levels: 6 levels from 5A to 30A (default 20A).
• Подешавања одлагања: Optional delay settings to prevent false triggers.

When an overload is detected, the output will be cut off, and the LED indicator will flash.

Image showing the speed controller and a child's electric car, emphasizing the adjustable overload protection feature that prevents damage during motor stalls.

4.3 Setting Current Levels and LED Indicators

The controller uses LED indicators for status checking and button settings for current levels.

• To Enter Current Setting Mode: Press and hold the K2 button. The LED will start blinking.
• To Cycle Through Current Levels: Press K2 repeatedly to cycle through the 6 current levels (5A, 10A, 15A, 20A, 25A, 30A).
• To Confirm Setting: The LED will become solid when a level is selected and confirmed.
• ЛЕД статус:
  • LED OFF / Solid Green: Normal Operation
  • LED Blinking Red: Overload Protection Triggered
  • LED Fast Flashing: Current Level Setting Mode Active

All custom settings are saved after power off, eliminating the need to reset them for daily use.

Close-up of the speed controller's LED indicators and function keys (K1, K2), explaining how to enter current setting mode and interpret LED signals.

5. Одржавање

To ensure optimal performance and longevity of your RioRand PWM DC Motor Speed Controller, follow these maintenance guidelines:

• Одржавати уредним одржавати чистим: Regularly clean the controller's exterior with a dry, soft cloth. Avoid using liquids or abrasive cleaners.
• вентилација: Ensure the ventilation holes on the casing are not obstructed to allow for proper heat dissipation.
• Провере везе: Periodically inspect all wiring connections for tightness and signs of wear or corrosion. Re-tighten if necessary.
• Услови животне средине: Operate and store the controller in a dry environment, away from excessive dust, moisture, and extreme temperatures.
• Избегавајте физичка оштећења: Protect the unit from impacts or drops that could damage internal components.

КСНУМКС. Решавање проблема

If you encounter issues with your speed controller, refer to the following common problems and solutions:

• Мотор не реагује:
  • Check power input: Ensure DC power (8-50V) is correctly connected and active.
  • Verify motor connections: Confirm motor wires are securely connected to M+ and M-.
  • Check compatibility: Ensure you are using a brushed DC motor. This controller does not work with brushless motors or AC power.
  • Inspect for damage: Look for any visible signs of damage to the controller or wiring.
• LED Blinking Red (Overload Protection):
  • This indicates an overcurrent event (e.g., motor stall, excessive load).
  • Reduce the load on the motor or check for obstructions.
  • Размотрите повећањеasing the overcurrent protection level (refer to Section 4.3) if your motor's normal operating current is higher than the current setting, but do not exceed 30A.
  • Allow the unit to cool down if it feels hot.
• Недоследна контрола брзине:
  • Ensure the control knob or external signal source is functioning correctly.
  • Check for loose connections in the control signal wiring.
• Прегревање јединице:
  • Ensure adequate ventilation around the controller.
  • Verify that the motor's power requirements do not exceed the controller's maximum limits (Max 30A).
  • Смањите оптерећење мотора.

Ако проблеми и даље постоје након покушаја ових корака за решавање проблема, обратите се корисничкој подршци.

7. Спецификације

Detailed specifications for the RioRand PWM DC Motor Speed Controller:

Specification table for the RioRand PWM DC Motor Speed Controller.

8. Информације о гаранцији

This RioRand PWM DC Motor Speed Controller comes with a 3-месечна гаранција from the date of purchase. The warranty covers defects in materials and workmanship under normal use.

Гаранција не покрива штету узроковану:

• Improper installation or wiring.
• Exceeding specified voltagе или ограничења струје.
• Connection to incompatible motor types (e.g., brushless motors, AC power).
• Physical damage, misuse, neglect, or unauthorized modifications.
• Нормално хабање.

Сачувајте доказ о куповини за гаранцијске захтеве.

9. Подршка

For further assistance, technical support, or warranty inquiries, please contact RioRand customer service through the platform where you purchased the product. Provide your product model number (B09TXCW73S) and a detailed description of your issue to expedite support.

You may also visit the official RioRand store page for additional product information and resources: RioRand Store