1. Безбедносне информације
Read all instructions thoroughly before installation and operation. Failure to follow these instructions may result in property damage, personal injury, or death. This appliance must be installed by a qualified electrician and plumber in accordance with all national and local electrical and plumbing codes.
- Електрична опасност: Ensure power is disconnected at the circuit breaker before performing any installation or maintenance.
- Притисак воде: Do not operate the unit if water pressure is below the minimum required.
- Подешавања температуре: Be aware of potential scalding hazards if the temperature is set too high.
- уземљење: Овај уређај мора бити правилно уземљен.
2. Производ је готовview
The ANZZI Envo Electric Tankless Water Heater provides on-demand hot water without the need for a storage tank. Its compact design allows for installation in various locations, saving space and reducing standby heat loss. This unit is designed for continuous hot water supply to multiple fixtures.
Кључне карактеристике:
- Heats water only when needed, eliminating standby heat loss.
- Compact design for installation in tight spaces.
- Supplies hot water to kitchen faucets, bathroom faucets, and showers.
- Features an LED display and overheat protection.
Слика 1: Фронт view of the ANZZI Envo Electric Tankless Water Heater, showcasinг његово зелено цasing and digital temperature display.
3. Спецификације
| Атрибут | Валуе |
|---|---|
| Бранд | АНЗЗИ |
| Број модела | ВХ-АЗ024-М3 |
| Ватtage | 24000 watts (24 kW) |
| Волtage | 240 Волтс |
| Излаз топлоте | 24000 Ваттс |
| Ефикасност | Висока ефикасност |
| Тип монтаже | зид |
| Димензије производа | 3.54 к 10.24 к 15.16 инча |
| Тежина артикла | 16.87 фунти |
| Посебне карактеристике | LED Display, Overheat Protection |
| Цертифицатион | ЕТЛ |
4. Инсталација
Professional installation is recommended for this appliance. Consult a licensed electrician and plumber prior to purchase and installation to ensure compliance with all local codes and proper sizing for your household needs.
4.1 Електрични захтеви
The ANZZI Envo 24 kW unit requires significant electrical capacity. Ensure your breaker panel can accommodate the following:
- Максимално извлачење: 100 Amps
- Потребан прекидач: 3 к 40 AMP Double Pole Breakers
- Required Wire: 3x8 AWG
- Minimum Panel Capacity: 200 Amps or more recommended.
Слика 2: Electrical requirements diagram for the ANZZI Envo 24 kW tankless water heater, detailing breaker and wire specifications.
4.2 Unit Capacity and Sizing
The performance of your tankless water heater depends on the incoming water temperature and the desired flow rate. Refer to the chart below to determine the appropriate unit capacity for your local climate and usage needs.
Слика 3: A map illustrating general temperature areas across the US, alongside a chart detailing GPM (Gallons Per Minute) usage for various fixtures at different inlet water temperatures, assuming an outlet temperature of 105°F.
4.3 Разматрања пласмана
The compact design of the ANZZI Envo allows for flexible installation. It can be installed in various locations such as under sinks, in utility closets, or garages, provided electrical and plumbing requirements are met.
Слика 4: Example installation of the ANZZI Envo tankless water heater within a bathroom cabinet, demonstrating its space-saving design.
Слика 5: An illustration showing the ANZZI Envo tankless water heater installed in a garage, providing hot water to multiple points of use in an adjacent kitchen and an upstairs bathroom.
Слика 6: Detailed dimensions of the ANZZI Envo tankless water heater, measuring approximately 10.2 inches wide by 15.1 inches high.
5. Упутство за употребу
The ANZZI Envo tankless water heater is designed for user-friendly operation. Once installed and powered, the unit will display the current water temperature.
5.1 Подешавање температуре
- Use the up and down arrow buttons on the front panel to adjust the desired water temperature.
- The LED display will show the set temperature.
- The unit will automatically heat water to the set temperature when flow is detected.
Слика 7: Internal diagram illustrating the flow of cold water into the heating element and the output of continuous hot water, highlighting the instant heating process.
5.2 Испорука топле воде
The unit provides instant and continuous hot water on demand. Open any hot water faucet to activate the heater. The unit will begin heating water as it flows through.
Слика 8: A shower head delivering hot water, demonstrating the instant hot water on demand feature of the ANZZI Envo tankless water heater.
Видео 1: An official ANZZI video demonstrating the installation and operation of the Envo Tankless Electric Water Heater, highlighting its compact size, instant hot water delivery to faucets and showers, and patented heating technology.
6. Одржавање
Regular maintenance ensures optimal performance and longevity of your ANZZI Envo tankless water heater.
- Годишња инспекција: Have a qualified technician inspect the unit annually for any signs of wear or damage.
- Чишћење: Периодично чистите спољашњост уређаја меком,amp тканина. Немојте користити абразивна средства за чишћење.
- Таложни филтер: If your water supply has high sediment, consider installing an external sediment filter and clean it regularly according to the filter manufacturer's instructions.
- Уклањање каменца: In areas with hard water, mineral buildup can affect performance. Consult a professional for descaling procedures if necessary.
Слика 9: A visual comparison demonstrating that the ANZZI Envo tankless water heater occupies over 90% less volume than a standard tank water heater.
КСНУМКС. Решавање проблема
If you experience issues with your ANZZI Envo tankless water heater, refer to the following common problems and solutions. For persistent issues, contact customer support.
| Проблем | Могући узрок | Решење |
|---|---|---|
| Нема топле воде | No power, low water flow, unit malfunction | Check circuit breaker. Ensure adequate water flow. Contact support if power and flow are normal. |
| Вода није довољно топла | Temperature set too low, high flow rate, cold inlet water | Increase set temperature. Reduce water flow at faucet. Refer to capacity chart (Figure 3). |
| Цурење јединице | Loose connections, damaged components | Turn off water supply and power. Inspect connections for tightness. Contact a plumber or support. |
| Шифра грешке на екрану | Унутрашња грешка | Note the error code and contact ANZZI customer support for assistance. |
8. Гаранција и подршка
For warranty information, please refer to the documentation included with your purchase or visit the official ANZZI website. If you require technical assistance, replacement parts, or have questions regarding your ANZZI Envo Electric Tankless Water Heater, please contact ANZZI customer support.
ANZZI корисничка служба: Refer to your product packaging or the ANZZI webсајт за најновије контакт информације.