Displays2go Motorized Rolling TV Stand (DGMLTSBK)

Увод

Thank you for choosing the Displays2go Motorized Rolling TV Stand. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your new TV stand. Please read all instructions carefully before assembly and use.

Важне информације о безбедности

• Прочитајте сва упутства: Ensure you understand all assembly and operation instructions before use.
• Капацитет тежине: Не прекорачујте максималну носивост од 120 кг (265 фунти).
• Величина екрана: This stand is designed for screens between 43" and 100".
• Извор напајања: Connect the stand to a grounded power outlet (110V-250V).
• Управљање кабловима: Ensure all cables are properly routed and secured to prevent tripping hazards or damage during movement.
• Браве на точковима: Always engage the caster locks when the stand is in a stationary position to prevent accidental movement.
• Деца и кућни љубимци: Keep children and pets away from the stand during operation to prevent injury.
• Одржавање: Do not attempt to service the motorized components yourself. Refer to qualified service personnel.

Подешавање и монтажа

Carefully unpack all components and verify against the parts list (not provided in this document, refer to packaging). Assembly typically involves attaching the base, column, and TV mounting brackets.

1. Склоп базе

Attach the four heavy-duty casters to the base frame. Ensure they are securely fastened. Two casters are lockable; position them for easy access.

2. Column Installation

Mount the motorized column onto the assembled base. Follow the specific instructions provided with your hardware kit to ensure proper alignment and secure attachment.

3. TV Mounting Bracket Attachment

Attach the VESA-compatible mounting brackets to the back of your television. Refer to your TV's manual for appropriate screw sizes and mounting points. The stand supports VESA sizes up to 800x600.

Image: The TV stand's mounting brackets are visible, ready for television attachment. This image shows the stand without a TV, highlighting the VESA mounting plate and the motorized column.

4. Монтажа телевизора

Carefully lift your television and hook the attached brackets onto the stand's mounting plate. Secure the TV using the provided safety screws or clips. Ensure the TV is level and stable.

Image: The motorized TV stand with a large television securely mounted in a vertical viewинг положај.

5. Прикључак за напајање

Connect the power cord to the stand and then to a suitable electrical outlet. The power cord length is 64 inches.

Упутство за употребу

The Displays2go Motorized Rolling TV Stand features remote-controlled height adjustment and tilt functionality.

Функције даљинског управљача

• Дугмад за горе/доле: Use these buttons to raise or lower the television screen. The height can be adjusted from 36" to 62".
• Tilt Buttons: Use these buttons to adjust the viewing angle of the screen, from a vertical position (0°) down to a horizontal table position (90°).

Подешавање висине

Press the "Up" or "Down" buttons on the remote control to move the screen to your desired height. The motorized mechanism will smoothly adjust the display.

Image: Illustration demonstrating the adjustable height feature of the TV stand, showing the screen at different vertical positions.

Подешавање нагиба

Press the "Tilt Up" or "Tilt Down" buttons on the remote control to change the screen's angle. This allows for conversion from a vertical display to an interactive horizontal table.

Image: Illustration demonstrating the adjustable tilt feature, showing the screen transitioning from vertical to a horizontal table-like orientation.

Image: The TV stand with a television fully tilted to a horizontal position, suitable for interactive table use.

Мобилност

To move the stand, unlock the two lockable casters. Carefully push the stand to its new location. Once positioned, engage the caster locks to stabilize the stand.

Видео о производу

Одржавање

• Чишћење: Обришите постоље меком крпомamp крпу. Избегавајте абразивна средства за чишћење или раствараче.
• Инспекције: Periodically check all fasteners and connections to ensure they are tight and secure.
• Motorized Components: The motorized system is designed for long-term use and generally requires no user maintenance. Do not lubricate or disassemble.
• Котачићи: Држите точкове чистим од остатака како бисте осигурали глатко котрљање.

Решавање проблема

Спецификације

Гаранција и подршка

Информације о гаранцији

This product is typically covered by a manufacturer's warranty. Please refer to your purchase documentation or contact Displays2go directly for specific warranty terms and conditions. A 30-day return policy is generally offered for this product.

Корисничка подршка

For technical assistance, missing parts, or any questions regarding your Displays2go Motorized Rolling TV Stand, please contact Displays2go customer support. Contact information can typically be found on the Displays2go webсајт или вашу фактуру за куповину.