BERTSCHAT Rechargeable Heated Insoles

BERTSCHAT® Упутство за употребу пуњивих грејаних уложака

Увод

Thank you for choosing BERTSCHAT® Rechargeable Heated Insoles. These insoles are designed to provide warmth and comfort for your feet in various conditions, from outdoor activities to daily wear. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your heated insoles.

Производ је завршенview

The BERTSCHAT® Rechargeable Heated Insoles system includes the following components:

  • 1 pair of BERTSCHAT® Heated Insoles
  • 1 Даљински управљач
  • КСНУМКС УСБ кабел за пуњење
  • 2 Power Banks (integrated into insoles)
BERTSCHAT Rechargeable Heated Insoles with remote control

An image showing a pair of BERTSCHAT rechargeable heated insoles and their accompanying remote control. The insoles are black with a grey and orange design, featuring the 'BERTSCHAT' logo. The remote control is black with four orange buttons: power, H (High), M (Medium), and L (Low).

Сетуп

  1. Прво пуњење: Before first use, fully charge both insoles. Connect the USB charging cable to the charging port on each insole and to a compatible USB power adapter (not included). The charging indicator light will show the charging status. A full charge typically takes several hours.
  2. Insole Placement: Insert the heated insoles into your shoes. Ensure they fit comfortably and do not cause any pressure points. If necessary, you may trim the insoles to fit your shoe size using the guide lines on the underside (trimming should only be done at the toe end and carefully to avoid damaging heating elements).
  3. даљински управљач: The remote control is pre-paired with the insoles. Ensure the remote has a working battery.

Пуњење

The BERTSCHAT® Heated Insoles feature integrated power banks that are rechargeable via the provided USB cable.

  • Locate the charging port on each insole.
  • Connect the USB charging cable to the insole's charging port.
  • Connect the other end of the USB cable to a standard USB power source (e.g., wall adapter, computer USB port, power bank).
  • The indicator light on the insole will illuminate during charging and change color or turn off when fully charged.
  • Време пуњења може да варира у зависности од извора напајања и преосталог нивоа батерије.

Операција

Your BERTSCHAT® Heated Insoles are operated using the wireless remote control.

  1. Укључивање/искључивање: Притисните дугме за напајање () on the remote control to turn the insoles on or off. The insoles will typically indicate power status with a light.
  2. Подешавање нивоа топлоте: Use the 'H', 'M', and 'L' buttons on the remote to select your desired heat level:
    • Х (високо): Provides maximum heat, up to 68°C. Ideal for extremely cold conditions.
    • М (средњи): Provides moderate heat for sustained comfort.
    • Л (ниска): Provides gentle warmth for extended use.
  3. Сензор температуре: The integrated temperature sensor helps maintain an optimal foot climate and manages battery power efficiently.

Одржавање

  • Чишћење: Clean the insoles with a damp cloth. Do not submerge them in water or machine wash. Ensure they are completely dry before recharging or storing.
  • Складиштење: Store the insoles in a cool, dry place when not in use. For long-term storage, it is recommended to charge the insoles to about 50% capacity every few months to preserve battery life.
  • Батерија даљинског управљача: Replace the remote control battery as needed. Refer to the remote control's specific instructions for battery type and replacement procedure.

Решавање проблема

ПроблемМогући узрокРешење
Insoles not heatingLow battery; Insoles not turned on; Remote control issue.Charge insoles fully. Press power button on remote. Check remote battery.
Даљински управљач не радиRemote battery depleted; Remote out of range; Pairing issue.Replace remote battery. Ensure remote is close to insoles. Re-pair if necessary (refer to specific pairing instructions if provided with product).
Short heating durationInsoles not fully charged; High heat setting used continuously; Extreme cold environment.Ensure full charge. Use lower heat settings for longer duration.

Спецификације

  • Материјал: 70% plastic, 20% polyester, 10% rubber
  • Трајање грејања: Up to 12 hours (depending on heat setting and environmental conditions)
  • Максимална температура: До 68°Ц
  • Извор напајања: Integrated rechargeable battery (USB cable provided)
  • Контрола: Бежични даљински управљач

Безбедносне информације

  • Do not puncture, cut, or modify the insoles.
  • Чувати даље од отвореног пламена и екстремне топлоте.
  • Do not use if the insoles appear damaged.
  • Consult a physician before use if you have circulatory problems, diabetes, or are pregnant.
  • Не користите док спавате.
  • Чувати ван домашаја деце.
  • Користите само приложени кабл за пуњење.

Гаранција и подршка

For warranty information or technical support, please refer to the product packaging or contact BERTSCHAT® customer service directly. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.