Увод
This manual provides detailed instructions for the assembly, operation, and maintenance of your Amazon Basics Mesh Desk Chair, Model FG-50854M. Please read this manual thoroughly before use to ensure proper function and safety.
Figure 1: The Amazon Basics Mesh Desk Chair (Model FG-50854M) in a typical office environment. This chair features a black mesh backrest, a wide padded seat, and adjustable armrests, designed for comfort and support.
The Amazon Basics Mesh Desk Chair is designed for comfort and durability, featuring a breathable mesh backrest, a wide seat with thick, high-density foam cushioning, and integrated lumbar support. It is built to accommodate a high load capacity and offers various adjustments for personalized comfort.
Безбедносне информације
УПОЗОРЕЊЕ: To ensure safe use, do not exceed the maximum load capacity of 181.4 kg (400 pounds). Verify that the chair is properly assembled and adjusted before each use. Improper use may result in injury.
- Увек пажљиво пратите упутства за монтажу.
- Немојте стајати на столици.
- Do not use the chair if any parts are damaged or missing.
- Keep children away from the chair during assembly. Small parts may be a choking hazard.
- Користите столицу само на равној површини.
Компоненте и монтажа
Before assembly, ensure all components are present and undamaged. Refer to the diagram below for identification of key parts and adjustable features.
Figure 2: Chair Components and Adjustable Features. This image illustrates the main parts of the chair, including the mesh backrest, padded seat, armrests, pneumatic height adjustment lever, and 360-degree swivel base with caster wheels.
Монтажни кораци
Assembly typically involves attaching the base to the pneumatic cylinder, then the seat and backrest. Specific tools may be included or required. Follow the detailed instructions provided in the packaging for your specific model.
- Распакујте све компоненте и проверите их у односу на списак компоненти.
- Insert the caster wheels into the base.
- Place the pneumatic cylinder into the center hole of the base.
- Attach the seat mechanism to the underside of the seat cushion.
- Mount the backrest to the seat mechanism.
- Place the assembled seat and backrest onto the pneumatic cylinder.
- Причврстите наслоне за руке на седиште.
- Test all adjustments to ensure proper function.
Упутство за употребу
Подешавање висине
To adjust the seat height (range: 47-55 cm):
- To raise the seat: Lift the height adjustment lever while taking your weight off the seat. Release the lever at the desired height.
- To lower the seat: Lift the height adjustment lever while seated. Release the lever at the desired height.
Подешавање наслона за руке
The armrests are adjustable in height (range: 65-72 cm from the floor). Locate the adjustment buttons or levers on the armrests and press them to move the armrests up or down. Release to lock in place.
Подешавање лумбалне подршке
The chair features an ergonomic design with adjustable lumbar support. Locate the knob on the back of the chair's backrest. Rotate the knob to increase or decrease the intensity of the lumbar support to suit your preference.
Swivel and Mobility
The chair is equipped with a 360-degree swivel function and five caster wheels for easy mobility. Ensure the wheels are clean and free of debris for smooth movement.
Одржавање
- Чишћење: Обришите столицу меком, дamp cloth. For mesh and fabric parts, use a mild soap solution if necessary, then wipe with a clean, damp крпом и оставите да се осуши на ваздуху. Избегавајте јаке хемикалије.
- инспекција: Периодично проверавајте све завртње и вијке да бисте били сигурни да су затегнути. По потреби их поново затегните.
- Котачићи: Keep caster wheels free of hair and debris to ensure smooth rolling.
- Складиштење: Store the chair in a dry environment, away from direct sunlight and extreme temperatures.
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Столица се не подешава по висини. | Pneumatic cylinder malfunction or lever not engaged. | Ensure the lever is fully engaged. If the issue persists, the pneumatic cylinder may need replacement. |
| Столица је климава или нестабилна. | Лабави завртњи или неправилна монтажа. | Check and tighten all screws and bolts. Re-verify assembly steps. |
| Caster wheels do not roll smoothly. | Debris caught in wheels or damaged casters. | Clean any debris from the wheels. Replace damaged casters if necessary. |
| Шкрипави звуци. | Лабаве везе или трење између делова. | Tighten all connections. Apply a small amount of silicone lubricant to moving parts if needed. |
Спецификације
Figure 3: Chair Dimensions. This diagram provides detailed measurements for the chair's width, depth, and height, including seat dimensions, backrest height, and armrest height.
| Феатуре | Детаљ |
|---|---|
| Бранд | Амазон Басицс |
| Број модела | FG-50854M |
| Боја | Црно |
| Материјал | Plastic, Metal, Mesh Fabric, High-Density Foam |
| Укупне димензије (Ш к Д к В) | Approx. 77.5 cm x 75 cm x 106 cm (Max Height) |
| Димензије седишта (Ш x Д) | 58 цм к 56 цм |
| Seat Height Adjustment Range | 47 цм - 55 цм |
| Armrest Height Adjustment Range (from floor) | 65 цм - 72 цм |
| Висина наслона | 69 cm (from seat) |
| Капацитет оптерећења | 181.4 кг (400 лбс) |
| Тежина производа | 18.82 кг |
| Карактеристике | Mesh back, wide padded seat, adjustable lumbar support, adjustable armrests, 360-degree swivel, 5-point caster base. |
Figure 4: Seat Cushion Construction. This diagram illustrates the four layers of the seat cushion: fabric, top foam, low-rebound main foam, and plywood base, highlighting the 8cm thick high-density foam for comfort.
Гаранција и подршка
This Amazon Basics product is covered by a 1-year domestic warranty in Japan from the date of purchase, provided by Amazon LLC. For warranty claims, technical support, or any inquiries regarding your product, please contact Amazon customer service through your purchase history on Amazon.co.jp.
Please have your purchase details and model number (FG-50854M) ready when contacting support.