GRAPHITE Energy+ 18V 2-in-1 Pole Saw and Hedge Trimmer User Manual

Увод

The GRAPHITE Energy+ 18V 2-in-1 Pole Saw and Hedge Trimmer (Model 58G098) is a versatile garden tool designed for efficient pruning and trimming tasks. This cordless device operates on the GRAPHITE Energy+ 18V Lithium-Ion battery system (battery not included). It combines the functionality of a pole saw for cutting branches and a hedge trimmer for shaping hedges and shrubs, offering extended reach for higher areas.

Безбедносне информације

Увек прочитајте и разумејте сва безбедносна упозорења, упутства, илустрације и спецификације које се испоручују са овим електричним алатом. Непоштовање свих доле наведених упутстава може довести до струјног удара, пожара и/или озбиљних повреда.

• Носите одговарајућу личну заштитну опрему (ЛЗО), укључујући заштитне наочаре, рукавице и заштиту за уши.
• Уверите се да је радно подручје чисто од пролазника, деце и кућних љубимаца.
• Не користите алат у влажним условима или у присуству запаљивих течности или гасова.
• Увек искључите батерију пре него што извршите било каква подешавања, промените додатну опрему или одложите алат.
• Држите алат чврсто обема рукама током рада.
• Be aware of falling debris when operating the pole saw or hedge trimmer at height.
• Keep hands and feet away from cutting blades and chains.
• Пре сваке употребе проверите да ли је алат оштећен. Не користите га ако је оштећен.

Садржај пакета

Проверите да ли су сви предмети присутни приликом распакивања:

• GRAPHITE Energy+ 18V 2-in-1 Pole Saw and Hedge Trimmer main unit
• Pole Saw attachment head (8" / 200 mm guide bar)
• Hedge Trimmer attachment head (430 mm cutting width)
• Продужни крак
• Нараменица
• Упутство за употребу
• Гарантни лист
• Note: 18V DC Lithium-Ion battery and charger are not included and must be purchased separately.

Сетуп

1. Attaching the Extension Arm

The extension arm allows for increased reach. To attach, align the hexagonal end of the extension arm with the corresponding socket on the main unit. Push firmly until it clicks into place. Ensure the connection is secure.

Figure 1: Extension arm connection point.

Description: This image displays a close-up of the tool's main body and the end of the extension pole, highlighting the hexagonal connection mechanism. The red collar on the tool's body indicates the locking point for the extension.

2. Attaching the Pole Saw Head

To attach the pole saw head, align the drive shaft of the saw head with the coupling on the extension arm (or main unit if not using the extension). Push and twist slightly until the head is fully seated and locked. Ensure the locking mechanism is engaged.

Figure 2: Assembled pole saw and hedge trimmer.

Description: This image shows the complete 2-in-1 tool, with the pole saw attachment on the upper part of the image and the hedge trimmer attachment on the lower part. Both are shown with the extension pole, illustrating the full length of the tool.

3. Attaching the Hedge Trimmer Head

Similar to the pole saw head, align the drive shaft of the hedge trimmer head with the coupling on the extension arm (or main unit). Push and twist slightly until the head is fully seated and locked. Verify the locking mechanism is engaged.

4. Инсталирање батерије

Insert a charged GRAPHITE Energy+ 18V Lithium-Ion battery into the battery slot on the handle of the main unit. Push until it clicks into place. To remove, press the release button and pull the battery out.

Упутство за употребу

Општа операција

• Before starting, ensure the area is clear and you have a stable footing.
• Увек чврсто држите алат обема рукама.
• To start the tool, press the safety lock-off button and then squeeze the trigger switch. Release the trigger to stop.
• Utilize the shoulder strap for improved balance and reduced fatigue during extended use.

Using the Pole Saw Attachment

The pole saw is designed for cutting branches up to 8 inches (200 mm) in diameter.

1. Подешавање напетости ланца: The pole saw features tool-less chain tensioning. Rotate the red knob to adjust chain tension. The chain should be snug but still able to be pulled freely around the guide bar.


Figure 3: Chain tension adjustment knob.

Description: This image provides a close-up view of the pole saw head, specifically highlighting the red, circular knob used for tool-less chain tension adjustment. A small lever is also visible, which is part of the tensioning system.

2. подмазивање: Ensure the chain oil reservoir is filled before use. The saw chain requires continuous lubrication during operation.

Figure 4: Oil reservoir cap.

Description: This image shows a detailed view of the pole saw's body near the chain, focusing on a small, red cap labeled "MIN" and "MAX", indicating the oil reservoir for chain lubrication.

3. Техника сечења: Position the saw head on the branch, allowing the chain to reach full speed before beginning the cut. Make a small undercut first to prevent pinching, then complete the cut from the top.

Using the Hedge Trimmer Attachment

The hedge trimmer is suitable for trimming hedges and shrubs with branches up to 15 mm in diameter.

1. Подешавање угла: The hedge trimmer head can be adjusted to various angles for optimal cutting. Press the red button and rotate the head to the desired angle, then release the button to lock it in place.


Figure 5: Hedge trimmer angle adjustment.

Description: This image focuses on the joint of the hedge trimmer attachment, showing a prominent red button that is used to adjust the cutting angle of the blades.

2. Техника сечења: Use a sweeping motion to cut through hedges. For thicker branches, make several passes. Avoid forcing the blades through dense material.

Figure 6: Hedge trimmer blades.

Description: This image provides a detailed close-up of the hedge trimmer's cutting blades, showing their sharp, serrated design.

Одржавање

• Чишћење: After each use, clean the tool thoroughly. Remove any debris, sawdust, or sap from the cutting attachments. Use a damp cloth for the main unit.
• Blade/Chain Care:
  • For the pole saw chain, ensure it is always sharp and properly tensioned. Replace worn or damaged chains.
  • For the hedge trimmer blades, regularly clean and lubricate them with a light machine oil to prevent rust and ensure smooth operation.
• Складиштење: Чувајте алат на сувом, сигурном месту, ван домашаја деце. Извадите батерију пре складиштења.
• Одржавање батерије: Чувајте батерије на хладном и сувом месту. Не складиштите потпуно испражњене батерије дуже време.

Решавање проблема

Спецификације

Гаранција и подршка

This GRAPHITE product comes with a 3-year warranty, as stated by the manufacturer. Please refer to the included Warranty Card for detailed terms and conditions.

For technical support, spare parts, or warranty claims, please contact your retailer or the official GRAPHITE service center. Contact information can typically be found on the warranty card or the manufacturer's official webсајту.

For more information about GRAPHITE products and the Energy+ system, visit the official GRAPHITE store: GRAPHITE Store on Amazon.de