GEARELEC Motorcycle Bluetooth Headset User Manual

1. Производ је готовview

The GEARELEC Motorcycle Bluetooth Headset is designed to provide clear communication and entertainment for riders. Featuring an upgraded Bluetooth 5.1 chip, it offers stable connections and a long intercom range of up to 1500 meters. The headset incorporates a triple noise reduction system and 40mm stereo speakers for crystal-clear sound quality, even at high speeds. Its user-friendly design ensures safe and efficient operation while riding.

2. Садржај пакета

Before beginning installation, please verify that all items are present in the package:

• 2 x Slušalice
• 2 x Hard Mics
• 2 x Soft Mics
• 4 x лепљивих трака
• 2 каблова за пуњење
• 2 к металне копче
• 2 x одвијача
• 4 к завртњи
• 3m Foam Pad for Microphone x4
• 3m Foam Pad for Speaker x8
• Quick-release Clip x2

3. Водич за подешавање

3.1. Headset Installation on Helmet

Follow these steps to properly install the headset on your helmet:

1. Монтажа Цлamp: Осигурајте монтажу цлamp to the helmet.
2. Позиционирање: Поставите цлamp to the proper position on the left side of the helmet.
3. Aligning Host: Поравнајте цлamp slot and install the FX host onto the clamp.
4. Earphone Velcro Pads: Stick the earphone velcro pads at the ear position inside the helmet.
5. Слушалице: Stick the headphones on the Velcro pads.
6. Утичница за слушалице: Plug the earphone into the FX earphone jacket.

3.2. Упаривање са мобилним телефоном путем Bluetooth-а

To connect your headset to your mobile phone:

1. Уђите у режим упаривања: Long press the headset power button until the indicator flashes red and blue alternately. This indicates the headset is in pairing state.
2. Повежите се: On your mobile phone, open Bluetooth settings and find "DK01" in the list of available devices. Click to connect.

3.3. Intercom Pairing Between Two Units

To establish intercom communication between two GEARELEC headsets:

1. Уђите у режим упаривања: On both units, press and hold the power buttons until the indicators become red and blue alternate flashing lights.
2. Започни упаривање: Press the power button of either unit. Both units will begin to pair.
3. Упаривање завршено: When the indicators of both units become slow flashing blue lights, it means the pairing is complete.

4. Упутство за употребу

4.1. Основне функције

• Укључивање/искључивање: Дуго притисните дугме за напајање.
• Репродукција музике/пауза: Притисните дугме за напајање једном.
• Следећа песма: Притисните дугме „+“.
• Претходна песма: Притисните дугме '-'.
• Појачавање звука: Дуго притисните дугме „+“.
• Смањивање јачине звука: Дуго притисните дугме '-'.
• Одговори/одбиј позиве: Use the dedicated phone button.

4.2. Опис лампице индикатора

The headset features indicator lights to show its status:

• Црвена индикаторска лампица: When charging, the red light is on. It automatically turns off when the battery is fully charged.
• Плава индикаторска лампица: The blue light flashes intermittently when the mobile phone is successfully connected.
• Red and Blue Flashing Alternately: This indicates the headset is waiting for a Bluetooth connection from the mobile phone. After a successful connection, the headset lights up blue.

5. Нега и одржавање

To ensure the longevity and optimal performance of your GEARELEC Bluetooth Headset, follow these care guidelines:

• Отпорност на воду: The headset has an IP65 protection level, making it resistant to water splashes and dust. While it can withstand rain, avoid submerging it in water.
• Температурни опсег: The headset is designed to operate in a wide temperature range from -40℃ to 60℃. Avoid exposing it to extreme temperatures outside this range for prolonged periods.
• Чишћење: Користите меку, дamp cloth to clean the exterior of the headset. Do not use harsh chemicals or abrasive cleaners.
• Складиштење: When not in use for extended periods, store the headset in a cool, dry place away from direct sunlight.
• Пуњење: Always use the provided Type-C charging cable. Ensure the charging port is dry before connecting the cable.

КСНУМКС. Решавање проблема

If you encounter issues with your GEARELEC Motorcycle Bluetooth Headset, consider the following general advice:

• Нема напајања: Ensure the battery is charged. Connect the headset to the charging cable and allow it to charge for at least 30 minutes before attempting to power on again.
• Проблеми упаривања: If the headset does not pair with your phone or another unit, ensure both devices are in pairing mode and within range. Try restarting both the headset and the device you are trying to pair with. Clear previous Bluetooth connections on your phone if necessary.
• Нема звука/лош квалитет звука: Check the volume levels on both the headset and the connected device. Ensure the speakers are correctly positioned inside the helmet and that the microphone is not obstructed. Verify the headset is fully charged.
• Искључење интерфона: If the intercom frequently disconnects, ensure both units are within the specified 1500m range and there are no major obstructions. Re-pair the units if the issue persists.

For persistent issues or more detailed troubleshooting, please refer to the contact information in the Warranty & Support section.

7. Спецификације

8. Гаранција и подршка

GEARELEC is committed to providing a satisfactory experience for its customers. While specific warranty terms are not detailed in this manual, the manufacturer stands behind its product.

If you have any questions, suggestions, or require technical assistance regarding the use or functionality of your GEARELEC Motorcycle Bluetooth Headset, please contact the manufacturer directly through their official channels or the retailer from whom you purchased the product. They will serve you wholeheartedly to resolve any concerns.