Mi-Heat Mi-300S RF бежични програмабилни термостат - упутство за употребу

4.1. Thermostat (Transmitter) Features

• Large LCD display for clear temperature and time indication.
• Wireless communication at 433 MHz with a range of up to 20 meters.
• Daily and weekly programming with 4 adjustable switching times.
• Вишеструки режими рада: Комфор, Еко и Одмор.
• Switchable between heating and cooling modes.
• Функција заштите од мраза.
• Battery-powered (2x AAA batteries).

Image 2: Key features of the Mi-300S RF Thermostat.

4.2. Thermostat Button Functions

Слика 3: Предња страна view of the thermostat with labeled buttons.

• Дугме за укључивање/искључивање: Powers the thermostat on or off.
• Heating & Cooling Option Button: Toggles between heating and cooling modes.
• Дугме за недељни програм: Accesses and sets weekly programming schedules.
• Дугме за режим: Cycles through Comfort, Eco, and Holiday modes.
• Temperature Adjustment Buttons (Up/Down): Подешава подешену температуру.

4.3. Receiver Unit Features

• Receives wireless signals from the thermostat.
• Безнапонски прекидачки контакт са максималном прекидачком снагом од 7А.
• Mains-powered (230V/50Hz).
• Manual operation button for temporary control.
• Pairing button for establishing wireless connection.
• LED indicator for operational status.

Image 4: Receiver unit with labeled connections and buttons.

5.1. Уградња батерије термостата

1. Отворите одељак за батерије на задњој страни термостата.
2. Уметните 2 x ААА батерије, водећи рачуна о исправном поларитету (+/-).
3. Close the battery compartment. The thermostat display should power on.

5.2. Ожичење пријемника

УПОЗОРЕЊЕ: Disconnect main power supply before performing any wiring. Incorrect wiring can cause damage to the device or heating system and poses an electrical hazard.

The receiver unit connects to your heating system. The wiring configuration depends on your specific heating application (e.g., underfloor heating, boiler, electric heating).

Слика 5: Примерample wiring diagrams for various heating systems.

• Напајање: Connect the receiver to a 230V/50Hz mains power supply. Use the "Receiver Power Cable Input" terminals (L and N).
• Heating System Connection: Connect your heating device (e.g., boiler, actuator, electric heater) to the "Heating/Cooling Unit Connection Cable Input" terminals. This is a potential-free switching contact.

Consult a qualified electrician if you are unsure about the wiring process for your specific heating system.

5.3. Упаривање термостата и пријемника

The thermostat and receiver are typically pre-paired from the factory. If they are not communicating or if you are setting up a new unit, follow these steps:

1. Ensure both the thermostat (with batteries) and the receiver (powered) are on.
2. On the receiver unit, press and hold the Дугме за упаривање (often marked with a link icon) until the LED indicator starts flashing.
3. On the thermostat, access the pairing menu (refer to the specific instructions in your full manual for the exact button sequence, usually involving holding a mode or program button).
4. Once pairing is successful, the receiver's LED will stop flashing and remain solid, or turn off, indicating a successful connection.
5. Test the connection by adjusting the temperature on the thermostat and observing if the receiver activates the heating system.

Image 6: Wireless communication between the thermostat and receiver.

5.4. Опције монтаже

The thermostat can be mounted in two ways:

• Монтажа на зид: Use the provided mounting material (screws and wall plugs) to secure the thermostat to a wall at an appropriate height, away from direct sunlight or drafts.
• Сталак за сто: Place the thermostat on a flat surface using the included table stand. This allows for flexible placement within the wireless range.

Image 7: Illustration of the thermostat's wireless range and flexible placement.

6.1. Основна операција

• Укључивање/искључивање: Press the On/Off button to turn the thermostat on or off.
• Подешавање температуре: Use the Up/Down arrow buttons to manually set the desired temperature. The display will show the current room temperature and the set temperature.

6.2. Избор режима

Притисните тастер Дугме за режим да бисте се кретали кроз доступне режиме рада:

• Комфорни режим: Maintains a higher, comfortable temperature.
• Еко режим: Maintains a lower, energy-saving temperature.
• Режим празника: Sets a constant, usually lower, temperature for an extended period, overriding programmed schedules.

Притисните тастер Дугме за опције грејања и хлађења to switch between heating and cooling functions, if your system supports both.

6.3. Programming Weekly Schedules

The Mi-300S RF allows for daily and weekly programming with up to 4 switching times per day. This feature helps optimize energy consumption by adjusting temperatures based on your schedule.

1. Притисните тастер Дугме за недељни програм да уђете у режим програмирања.
2. Use the Up/Down buttons to navigate through days (Monday-Sunday) and time slots (e.g., P1, P2, P3, P4).
3. For each time slot, set the desired start time and target temperature using the adjustment buttons.
4. Confirm each setting to move to the next.
5. Exit programming mode by pressing the Weekly Program Button again or waiting for a timeout.

Refer to the detailed programming section in the complete user manual for specific steps and advanced options.

6.4. Заштита од смрзавања

The thermostat includes a frost protection feature. When activated, the thermostat will automatically turn on the heating if the room temperature drops below a pre-set minimum (typically around 5-7°C) to prevent pipes from freezing. This function is usually active in all modes, especially Holiday mode.